From: steve.capper@linaro.org (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATH V2 4/6] arm: mm: Enable RCU fast_gup
Date: Thu, 21 Aug 2014 16:43:30 +0100 [thread overview]
Message-ID: <1408635812-31584-5-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1408635812-31584-1-git-send-email-steve.capper@linaro.org>
Activate the RCU fast_gup for ARM. We also need to force THP splits to
broadcast an IPI s.t. we block in the fast_gup page walker. As THP
splits are comparatively rare, this should not lead to a noticeable
performance degradation.
Some pre-requisite functions pud_write and pud_page are also added.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
arch/arm/Kconfig | 4 ++++
arch/arm/include/asm/pgtable-3level.h | 8 ++++++++
arch/arm/mm/flush.c | 15 +++++++++++++++
3 files changed, 27 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cc740d2..21f12be 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1645,6 +1645,10 @@ config ARCH_SELECT_MEMORY_MODEL
config HAVE_ARCH_PFN_VALID
def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+config HAVE_RCU_GUP
+ def_bool y
+ depends on ARM_LPAE
+
config HIGHMEM
bool "High Memory Support"
depends on MMU
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 16122d4..a31ecdad 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -224,6 +224,8 @@ static inline pte_t pte_mkspecial(pte_t pte)
#define __HAVE_ARCH_PMD_WRITE
#define pmd_write(pmd) (pmd_isclear((pmd), L_PMD_SECT_RDONLY))
#define pmd_dirty(pmd) (pmd_isset((pmd), L_PMD_SECT_DIRTY))
+#define pud_page(pud) pmd_page(__pmd(pud_val(pud)))
+#define pud_write(pud) pmd_write(__pmd(pud_val(pud)))
#define pmd_hugewillfault(pmd) (!pmd_young(pmd) || !pmd_write(pmd))
#define pmd_thp_or_huge(pmd) (pmd_huge(pmd) || pmd_trans_huge(pmd))
@@ -231,6 +233,12 @@ static inline pte_t pte_mkspecial(pte_t pte)
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define pmd_trans_huge(pmd) (pmd_val(pmd) && !pmd_table(pmd))
#define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING))
+
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+ pmd_t *pmdp);
+#endif
#endif
#define PMD_BIT_FUNC(fn,op) \
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 43d54f5..265b836 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -400,3 +400,18 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
*/
__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+ pmd_t *pmdp)
+{
+ pmd_t pmd = pmd_mksplitting(*pmdp);
+ VM_BUG_ON(address & ~PMD_MASK);
+ set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+
+ /* dummy IPI to serialise against fast_gup */
+ kick_all_cpus_sync();
+}
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
--
1.9.3
next prev parent reply other threads:[~2014-08-21 15:43 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-21 15:43 [PATH V2 0/6] RCU get_user_pages_fast and __get_user_pages_fast Steve Capper
2014-08-21 15:43 ` [PATH V2 1/6] mm: Introduce a general RCU get_user_pages_fast Steve Capper
2014-08-27 8:54 ` Will Deacon
2014-08-27 12:50 ` Steve Capper
2014-08-27 13:14 ` Will Deacon
2014-08-27 14:28 ` Catalin Marinas
2014-08-27 14:42 ` Steve Capper
2014-08-27 15:01 ` Russell King - ARM Linux
2014-08-28 8:59 ` Steve Capper
2014-08-21 15:43 ` [PATH V2 2/6] arm: mm: Introduce special ptes for LPAE Steve Capper
2014-08-27 10:46 ` Catalin Marinas
2014-08-27 12:52 ` Steve Capper
2014-08-21 15:43 ` [PATH V2 3/6] arm: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-08-27 11:50 ` Catalin Marinas
2014-08-27 12:59 ` Steve Capper
2014-08-21 15:43 ` Steve Capper [this message]
2014-08-27 11:51 ` [PATH V2 4/6] arm: mm: Enable RCU fast_gup Catalin Marinas
2014-08-27 13:01 ` Steve Capper
2014-08-21 15:43 ` [PATH V2 5/6] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-08-27 10:48 ` Catalin Marinas
2014-08-27 13:08 ` Steve Capper
2014-08-21 15:43 ` [PATH V2 6/6] arm64: mm: Enable RCU fast_gup Steve Capper
2014-08-27 11:09 ` Catalin Marinas
2014-08-27 13:43 ` Steve Capper
2014-08-21 20:42 ` [PATH V2 0/6] RCU get_user_pages_fast and __get_user_pages_fast Dann Frazier
2014-08-22 8:11 ` Steve Capper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408635812-31584-5-git-send-email-steve.capper@linaro.org \
--to=steve.capper@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).