[RESEND PATCH 0/4] Enables STMicroelectronics Flexgen Clock support

[RESEND PATCH 0/4] Enables STMicroelectronics Flexgen Clock support

[Gabriel FERNANDEZ]

These patches enables clock drivers for STih407 boards.

Gabriel Fernandez (4):
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3
  ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9

 arch/arm/boot/dts/stih407-clock.dtsi     | 295 ++++++++++++++++++++++++++++++-
 arch/arm/boot/dts/stih407.dtsi           |  18 +-
 include/dt-bindings/clock/stih407-clks.h |  11 ++
 3 files changed, 307 insertions(+), 17 deletions(-)
 create mode 100644 include/dt-bindings/clock/stih407-clks.h

-- 
1.9.1

[RESEND PATCH 1/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0

[Gabriel FERNANDEZ]

Patch adds DT entries for clockgen A0

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 800f46f..e03e86e 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -7,6 +7,10 @@
  */
 / {
 	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
 		/*
 		 * Fixed 30MHz oscillator inputs to SoC
 		 */
@@ -35,5 +39,33 @@
 			clock-frequency = <200000000>;
 			clock-output-names = "clk-s-icn-reg-0";
 		};
+
+		/*
+		 * ClockGenAs on SASG2
+		 */
+		clockgen-a at 090ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0";
+			};
+		};
 	};
 };
-- 
1.9.1

[RESEND PATCH 1/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0

[Maxime Coquelin]

On 08/25/2014 04:44 PM, Gabriel FERNANDEZ wrote:
> Patch adds DT entries for clockgen A0
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
> ---
>   arch/arm/boot/dts/stih407-clock.dtsi | 32 ++++++++++++++++++++++++++++++++
>   1 file changed, 32 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
> index 800f46f..e03e86e 100644
> --- a/arch/arm/boot/dts/stih407-clock.dtsi
> +++ b/arch/arm/boot/dts/stih407-clock.dtsi
> @@ -7,6 +7,10 @@
>    */
>   / {
>   	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
>   		/*
>   		 * Fixed 30MHz oscillator inputs to SoC
>   		 */
> @@ -35,5 +39,33 @@
>   			clock-frequency = <200000000>;
>   			clock-output-names = "clk-s-icn-reg-0";
>   		};
> +
> +		/*
> +		 * ClockGenAs on SASG2
> +		 */
Note that I removed this comment since no SASG2 on STiH407.

> +		clockgen-a at 090ff000 {
> +			compatible = "st,clkgen-c32";
> +			reg = <0x90ff000 0x1000>;
...

[RESEND PATCH 1/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0

[Gabriel Fernandez]

Thanks Maxime !

On 09/23/2014 09:44 AM, Maxime Coquelin wrote:
>
>
> On 08/25/2014 04:44 PM, Gabriel FERNANDEZ wrote:
>> Patch adds DT entries for clockgen A0
>>
>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
>> ---
>>   arch/arm/boot/dts/stih407-clock.dtsi | 32 
>> ++++++++++++++++++++++++++++++++
>>   1 file changed, 32 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/stih407-clock.dtsi 
>> b/arch/arm/boot/dts/stih407-clock.dtsi
>> index 800f46f..e03e86e 100644
>> --- a/arch/arm/boot/dts/stih407-clock.dtsi
>> +++ b/arch/arm/boot/dts/stih407-clock.dtsi
>> @@ -7,6 +7,10 @@
>>    */
>>   / {
>>       clocks {
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        ranges;
>> +
>>           /*
>>            * Fixed 30MHz oscillator inputs to SoC
>>            */
>> @@ -35,5 +39,33 @@
>>               clock-frequency = <200000000>;
>>               clock-output-names = "clk-s-icn-reg-0";
>>           };
>> +
>> +        /*
>> +         * ClockGenAs on SASG2
>> +         */
> Note that I removed this comment since no SASG2 on STiH407.
>
>> +        clockgen-a at 090ff000 {
>> +            compatible = "st,clkgen-c32";
>> +            reg = <0x90ff000 0x1000>;
> ...

[RESEND PATCH 2/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0

[Gabriel FERNANDEZ]

Patch adds DT entries for clockgen C0

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi     | 94 ++++++++++++++++++++++++++++----
 arch/arm/boot/dts/stih407.dtsi           | 18 +++---
 include/dt-bindings/clock/stih407-clks.h | 11 ++++
 3 files changed, 103 insertions(+), 20 deletions(-)
 create mode 100644 include/dt-bindings/clock/stih407-clks.h

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index e03e86e..85cc135 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -5,6 +5,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <dt-bindings/clock/stih407-clks.h>
 / {
 	clocks {
 		#address-cells = <1>;
@@ -30,17 +31,6 @@
 		};
 
 		/*
-		 * Bootloader initialized system infrastructure clock for
-		 * serial devices.
-		 */
-		clk_ext2f_a9: clockgen-c0 at 13 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <200000000>;
-			clock-output-names = "clk-s-icn-reg-0";
-		};
-
-		/*
 		 * ClockGenAs on SASG2
 		 */
 		clockgen-a at 090ff000 {
@@ -67,5 +57,87 @@
 				clock-output-names = "clk-ic-lmi0";
 			};
 		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs at 9103000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+		};
+
+		clk_s_c0: clockgen-c at 09103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 4f9024f..f539627 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -104,7 +104,7 @@
 			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_serial0>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 
 			status = "disabled";
 		};
@@ -115,7 +115,7 @@
 			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_serial1>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 
 			status = "disabled";
 		};
@@ -126,7 +126,7 @@
 			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_serial2>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 
 			status = "disabled";
 		};
@@ -158,7 +158,7 @@
 			compatible = "st,comms-ssc4-i2c";
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x9840000 0x110>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
@@ -171,7 +171,7 @@
 			compatible = "st,comms-ssc4-i2c";
 			reg = <0x9841000 0x110>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
@@ -184,7 +184,7 @@
 			compatible = "st,comms-ssc4-i2c";
 			reg = <0x9842000 0x110>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
@@ -197,7 +197,7 @@
 			compatible = "st,comms-ssc4-i2c";
 			reg = <0x9843000 0x110>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
@@ -210,7 +210,7 @@
 			compatible = "st,comms-ssc4-i2c";
 			reg = <0x9844000 0x110>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
@@ -223,7 +223,7 @@
 			compatible = "st,comms-ssc4-i2c";
 			reg = <0x9845000 0x110>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
diff --git a/include/dt-bindings/clock/stih407-clks.h b/include/dt-bindings/clock/stih407-clks.h
new file mode 100644
index 0000000..1f9bfe0
--- /dev/null
+++ b/include/dt-bindings/clock/stih407-clks.h
@@ -0,0 +1,11 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH407
+#define _DT_BINDINGS_CLK_STIH407
+
+/* CLOCKGEN C0 */
+#define CLK_EXT2F_A9		13
+
+#endif
-- 
1.9.1

[RESEND PATCH 3/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3

[Gabriel FERNANDEZ]

Patch adds DT entries for clockgen D0/D2/D3

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 126 +++++++++++++++++++++++++++++++++++
 1 file changed, 126 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 85cc135..6e59011 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -139,5 +139,131 @@
 						     "clk-compo-dvp";
 			};
 		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs at 9104000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0 at 09104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs at 9106000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen-d2 at x9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs at 9107000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3 at 9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
 	};
 };
-- 
1.9.1

[RESEND PATCH 4/4] ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9

[Gabriel FERNANDEZ]

Patch adds DT entries for clockgen A9

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
---
 arch/arm/boot/dts/stih407-clock.dtsi | 55 ++++++++++++++++++++++++++++++++++--
 1 file changed, 52 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 6e59011..b4318e1 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -24,10 +24,59 @@
 		/*
 		 * ARM Peripheral clock for timers
 		 */
-		arm_periph_clk: arm-periph-clk {
+		arm_periph_clk: clk-m-a9-periphs {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <600000000>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9 at 92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9 at 92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_s_c0_flexgen 13>;
+
+			clock-output-names = "clk-m-a9-ext2f-div2";
+
+			clock-div = <2>;
+			clock-mult = <1>;
 		};
 
 		/*
-- 
1.9.1

[RESEND PATCH 0/4] Enables STMicroelectronics Flexgen Clock support

[Maxime Coquelin]

Hi Gabi,

	Series applied to sti-dt-for-v3.18.

Thanks!
Maxime

On 08/25/2014 04:44 PM, Gabriel FERNANDEZ wrote:
> These patches enables clock drivers for STih407 boards.
>
> Gabriel Fernandez (4):
>    ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0
>    ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0
>    ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3
>    ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9
>
>   arch/arm/boot/dts/stih407-clock.dtsi     | 295 ++++++++++++++++++++++++++++++-
>   arch/arm/boot/dts/stih407.dtsi           |  18 +-
>   include/dt-bindings/clock/stih407-clks.h |  11 ++
>   3 files changed, 307 insertions(+), 17 deletions(-)
>   create mode 100644 include/dt-bindings/clock/stih407-clks.h
>