[PATCHv3 2/6] ARM: dts: Add initial LS1021A QDS board dts support

[PATCHv3 2/6] ARM: dts: Add initial LS1021A QDS board dts support

[Jingchang Lu]

From: Jingchang Lu <b35083@freescale.com>

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Chao Fu <B44548@freescale.com>
Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
---
changes in v3:
 remove IFC partition info.

 arch/arm/boot/dts/Makefile        |   3 +-
 arch/arm/boot/dts/ls1021a-qds.dts | 323 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 325 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 82f498b..af0d999 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -239,7 +239,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6sx-sdb.dtb \
 	vf610-colibri.dtb \
 	vf610-cosmic.dtb \
-	vf610-twr.dtb
+	vf610-twr.dtb \
+	ls1021a-qds.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
 	imx23-stmp378x_devb.dtb \
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
new file mode 100644
index 0000000..a3e54a5
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -0,0 +1,323 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A QDS Board";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy1;
+		enet1_rgmii_phy = &rgmii_phy2;
+		enet2_rgmii_phy = &rgmii_phy3;
+		enet0_sgmii_phy = &sgmii_phy1c;
+		enet1_sgmii_phy = &sgmii_phy1d;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,vf610-sgtl5000";
+		simple-audio-card,name = "FSL-VF610-TWR-BOARD";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu = <&sai2>;
+
+		simple-audio-card,codec = <&codec>;
+	};
+
+	soc {
+		leds {
+			compatible = "pwm-leds";
+			led0 {
+				label = "led0";
+				pwms = <&pwm3 0 150000 0>;
+				max-brightness = <100>;
+			};
+			led1 {
+				label = "led1";
+				pwms = <&pwm3 1 150000 0>;
+				max-brightness = <100>;
+			};
+			led2 {
+				label = "led2";
+				pwms = <&pwm3 2 150000 0>;
+				max-brightness = <100>;
+			};
+			led3 {
+				label = "led3";
+				pwms = <&pwm3 3 150000 0>;
+				max-brightness = <100>;
+			};
+			led4 {
+				label = "led4";
+				pwms = <&pwm3 4 150000 0>;
+				max-brightness = <100>;
+			};
+			led5 {
+				label = "led5";
+				pwms = <&pwm3 5 150000 0>;
+				max-brightness = <100>;
+			};
+			led6 {
+				label = "led6";
+				pwms = <&pwm3 6 150000 0>;
+				max-brightness = <100>;
+			};
+			led7 {
+				label = "led7";
+				pwms = <&pwm3 7 150000 0>;
+				max-brightness = <100>;
+			};
+		};
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at45db021d at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547 at 77 {
+		compatible = "philips,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc at 68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c at 2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220 at 40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220 at 41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c at 3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom at 56 {
+				compatible = "at24,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom at 57 {
+				compatible = "at24,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a at 4c {
+				compatible = "adt7461a";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c at 4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000 at 0a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&platform_clk 1>;
+			};
+		};
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		0x2 0x0 0x0 0x7e800000 0x00010000
+		0x3 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor at 0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand at 2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		fpga: board-control at 3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			reg = <0x3 0x0 0x0000100>;
+			bank-width = <1>;
+			device-width = <1>;
+			ranges = <0 3 0 0x100>;
+
+			mdio-mux-emi1 {
+				compatible = "mdio-mux-mmioreg";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x54 1>; /* BRDCFG4 */
+				mux-mask = <0xe0>; /* EMI1[2:0] */
+
+				/* Onboard PHYs */
+				ls1021amdio0: mdio at 0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					rgmii_phy1: ethernet-phy at 1 {
+						reg = <0x1>;
+					};
+				};
+				ls1021amdio1: mdio at 20 {
+					reg = <0x20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					rgmii_phy2: ethernet-phy at 2 {
+						reg = <0x2>;
+					};
+				};
+				ls1021amdio2: mdio at 40 {
+					reg = <0x40>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					rgmii_phy3: ethernet-phy at 3 {
+						reg = <0x3>;
+					};
+				};
+				ls1021amdio3: mdio at 60 {
+					reg = <0x60>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					sgmii_phy1c: ethernet-phy at 1c {
+						reg = <0x1c>;
+					};
+				};
+				ls1021amdio4: mdio at 80 {
+					reg = <0x80>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					sgmii_phy1d: ethernet-phy at 1d {
+						reg = <0x1d>;
+					};
+				};
+			};
+		};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	tbi0: tbi-phy at 8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
-- 
1.8.0

[PATCHv3 3/6] ARM: dts: Add initial LS1021A TWR board dts support

[Jingchang Lu]

Signed-off-by: Chen Lu <B46807@freescale.com>
Signed-off-by: Chao Fu <B44548@freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
---
changes in v3:
 remove IFC partition info.

 arch/arm/boot/dts/Makefile        |   3 +-
 arch/arm/boot/dts/ls1021a-twr.dts | 155 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 157 insertions(+), 1 deletion(-)
 create mode 100755 arch/arm/boot/dts/ls1021a-twr.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index af0d999..571c395 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -240,7 +240,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	vf610-colibri.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb \
-	ls1021a-qds.dtb
+	ls1021a-qds.dtb \
+	ls1021a-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
 	imx23-stmp378x_devb.dtb \
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
new file mode 100755
index 0000000..f56dd90
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -0,0 +1,155 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A TWR Board";
+
+	aliases {
+		enet2_rgmii_phy = &rgmii_phy1;
+		enet0_sgmii_phy = &sgmii_phy2;
+		enet1_sgmii_phy = &sgmii_phy0;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,vf610-sgtl5000";
+		simple-audio-card,name = "FSL-VF610-TWR-BOARD";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu = <&sai1>;
+
+		simple-audio-card,codec = <&codec>;
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: s25fl064k at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl064k";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy2>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&sgmii_phy0>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	codec: sgtl5000 at a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&platform_clk 1>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, and CPLD on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+
+		nor at 0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy0: ethernet-phy at 0 {
+		reg = <0x0>;
+	};
+	rgmii_phy1: ethernet-phy at 1 {
+		reg = <0x1>;
+	};
+	sgmii_phy2: ethernet-phy at 2 {
+		reg = <0x2>;
+	};
+	tbi1: tbi-phy at 1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
-- 
1.8.0

[PATCHv3 4/6] dt-bindings: arm: add Freescale LS1021A SoC device tree binding

[Jingchang Lu]

Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
---
changes in v3:
 revise the SCFG and DCFG description.

 Documentation/devicetree/bindings/arm/fsl.txt | 38 +++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index e935d7d..2e0ba09 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -74,3 +74,41 @@ Required root node properties:
 i.MX6q generic board
 Required root node properties:
     - compatible = "fsl,imx6q";
+
+
+Freescale LS1021A Platform Device Tree Bindings
+------------------------------------------------
+
+Required root node compatible properties:
+  - compatible = "fsl,ls1021a";
+
+Freescale LS1021A SoC-specific Device Tree Bindings
+-------------------------------------------
+
+Freescale SCFG
+  scfg is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+  Required properties:
+  - compatible: should be "fsl,ls1021a-scfg"
+  - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+	scfg: scfg at 1570000 {
+		compatible = "fsl,ls1021a-scfg";
+		reg = <0x0 0x1570000 0x0 0x10000>;
+	};
+
+Freescale DCFG
+  dcfg is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+  Required properties:
+  - compatible: should be "fsl,ls1021a-dcfg"
+  - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+	dcfg: dcfg at 1ee0000 {
+		compatible = "fsl,ls1021a-dcfg";
+		reg = <0x0 0x1ee0000 0x0 0x10000>;
+	};
-- 
1.8.0

[PATCHv3 0/6] ARM: imx: Add Freescale LS1021A SoC and board support

[Jingchang Lu]

This series contain the support for Freescale LS1021A CPU and LS1021A-QDS
and LS1021A-TWR board.

The LS1021A SoC combines two ARM Cortex-A7 cores that have been optimized
for high reliability and pack the highest level of integration available
for sub-3W embedded communications processors and with a comprehensive
enablement model focused on ease of programmability.

The LS1021A SoC shares IPs with i.MX family, Vybrid family and Freescale
PowerPC platform. 

For the detail information about LS1021A SoC, please refer to the RM doc.

---
changes in v3:
rewrite scfg and dcfg binding doc description.
remove sai related node leaving to the driver support.

changes in v2:
remove unused nodes.
wakeup the secondary core by IPI call to u-boot standby procedure. 
add dt-bindings for LS1021A SoC and platform gerenal configuration nodes.

----------------------------------------------------------------
Jingchang Lu (6):
	ARM: dts: Add SoC level device tree support for LS1021A
	ARM: dts: Add initial LS1021A QDS board dts support
	ARM: dts: Add initial LS1021A TWR board dts support
	dt-bindings: arm: add Freescale LS1021A SoC device tree binding
	ARM: imx: Add initial support for Freescale LS1021A
	ARM: imx: Add Freescale LS1021A SMP support

 Documentation/devicetree/bindings/arm/fsl.txt |  38 +++
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/ls1021a-qds.dts             | 285 +++++++++++++++++++++
 arch/arm/boot/dts/ls1021a-twr.dts             | 117 +++++++++
 arch/arm/boot/dts/ls1021a.dtsi                | 670 ++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/Kconfig                     |  14 ++
 arch/arm/mach-imx/Makefile                    |   4 +-
 arch/arm/mach-imx/common.h                    |   1 +
 arch/arm/mach-imx/mach-ls1021a.c              |  34 +++
 arch/arm/mach-imx/platsmp.c                   |  32 +++
 10 files changed, 1205 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts
 create mode 100755 arch/arm/boot/dts/ls1021a-twr.dts
 create mode 100644 arch/arm/boot/dts/ls1021a.dtsi
 create mode 100644 arch/arm/mach-imx/mach-ls1021a.c

[PATCHv3 2/6] ARM: dts: Add initial LS1021A QDS board dts support

[Jingchang Lu]

From: Jingchang Lu <b35083@freescale.com>

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Chao Fu <B44548@freescale.com>
Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
---
 arch/arm/boot/dts/Makefile        |   1 +
 arch/arm/boot/dts/ls1021a-qds.dts | 285 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 286 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 75c7b74..d2609c4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -245,6 +245,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-tx6q-1110.dtb \
 	imx6sl-evk.dtb \
 	imx6sx-sdb.dtb \
+	ls1021a-qds.dtb \
 	vf610-colibri-eval-v3.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
new file mode 100644
index 0000000..a0a95f5
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -0,0 +1,285 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A QDS Board";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy1;
+		enet1_rgmii_phy = &rgmii_phy2;
+		enet2_rgmii_phy = &rgmii_phy3;
+		enet0_sgmii_phy = &sgmii_phy1c;
+		enet1_sgmii_phy = &sgmii_phy1d;
+	};
+
+	soc {
+		leds {
+			compatible = "pwm-leds";
+			led0 {
+				label = "led0";
+				pwms = <&pwm3 0 150000 0>;
+				max-brightness = <100>;
+			};
+			led1 {
+				label = "led1";
+				pwms = <&pwm3 1 150000 0>;
+				max-brightness = <100>;
+			};
+			led2 {
+				label = "led2";
+				pwms = <&pwm3 2 150000 0>;
+				max-brightness = <100>;
+			};
+			led3 {
+				label = "led3";
+				pwms = <&pwm3 3 150000 0>;
+				max-brightness = <100>;
+			};
+			led4 {
+				label = "led4";
+				pwms = <&pwm3 4 150000 0>;
+				max-brightness = <100>;
+			};
+			led5 {
+				label = "led5";
+				pwms = <&pwm3 5 150000 0>;
+				max-brightness = <100>;
+			};
+			led6 {
+				label = "led6";
+				pwms = <&pwm3 6 150000 0>;
+				max-brightness = <100>;
+			};
+			led7 {
+				label = "led7";
+				pwms = <&pwm3 7 150000 0>;
+				max-brightness = <100>;
+			};
+		};
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at45db021d at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1c>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi0>;
+	phy-handle = <&sgmii_phy1d>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy3>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547 at 77 {
+		compatible = "philips,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc at 68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c at 2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220 at 40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220 at 41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c at 3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom at 56 {
+				compatible = "at24,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom at 57 {
+				compatible = "at24,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a at 4c {
+				compatible = "adt7461a";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c at 4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		0x2 0x0 0x0 0x7e800000 0x00010000
+		0x3 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor at 0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand at 2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		fpga: board-control at 3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			reg = <0x3 0x0 0x0000100>;
+			bank-width = <1>;
+			device-width = <1>;
+			ranges = <0 3 0 0x100>;
+
+			mdio-mux-emi1 {
+				compatible = "mdio-mux-mmioreg";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x54 1>; /* BRDCFG4 */
+				mux-mask = <0xe0>; /* EMI1[2:0] */
+
+				/* Onboard PHYs */
+				ls1021amdio0: mdio at 0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					rgmii_phy1: ethernet-phy at 1 {
+						reg = <0x1>;
+					};
+				};
+				ls1021amdio1: mdio at 20 {
+					reg = <0x20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					rgmii_phy2: ethernet-phy at 2 {
+						reg = <0x2>;
+					};
+				};
+				ls1021amdio2: mdio at 40 {
+					reg = <0x40>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					rgmii_phy3: ethernet-phy at 3 {
+						reg = <0x3>;
+					};
+				};
+				ls1021amdio3: mdio at 60 {
+					reg = <0x60>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					sgmii_phy1c: ethernet-phy at 1c {
+						reg = <0x1c>;
+					};
+				};
+				ls1021amdio4: mdio at 80 {
+					reg = <0x80>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					sgmii_phy1d: ethernet-phy at 1d {
+						reg = <0x1d>;
+					};
+				};
+			};
+		};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	tbi0: tbi-phy at 8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
-- 
1.8.0