[PATCH 3/3] clk: zynq: Move const initdata into correct code section

Soren Brinkmann
2014-09-02T23:02:09Z

Use __initconst instead of __initdata for constant init data.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
drivers/clk/zynq/clkc.c | 29 ++++++++++++++---------------
1 file changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 6ab793ac8c2c..9037bebd69f7 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -85,24 +85,22 @@ static DEFINE_SPINLOCK(canmioclk_lock);
static DEFINE_SPINLOCK(dbgclk_lock);
static DEFINE_SPINLOCK(aperclk_lock);

-static const char dummy_nm[] __initconst = "dummy_name";
-
-static const char *armpll_parents[] __initdata = {"armpll_int", "ps_clk"};
-static const char *ddrpll_parents[] __initdata = {"ddrpll_int", "ps_clk"};
-static const char *iopll_parents[] __initdata = {"iopll_int", "ps_clk"};
-static const char *gem0_mux_parents[] __initdata = {"gem0_div1", dummy_nm};
-static const char *gem1_mux_parents[] __initdata = {"gem1_div1", dummy_nm};
-static const char *can0_mio_mux2_parents[] __initdata = {"can0_gate",
+static const char *armpll_parents[] __initconst = {"armpll_int", "ps_clk"};
+static const char *ddrpll_parents[] __initconst = {"ddrpll_int", "ps_clk"};
+static const char *iopll_parents[] __initconst = {"iopll_int", "ps_clk"};
+static const char *gem0_mux_parents[] __initconst = {"gem0_div1", "dummy_name"};
+static const char *gem1_mux_parents[] __initconst = {"gem1_div1", "dummy_name"};
+static const char *can0_mio_mux2_parents[] __initconst = {"can0_gate",
"can0_mio_mux"};
-static const char *can1_mio_mux2_parents[] __initdata = {"can1_gate",
+static const char *can1_mio_mux2_parents[] __initconst = {"can1_gate",
"can1_mio_mux"};
-static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div",
- dummy_nm};
+static const char *dbg_emio_mux_parents[] __initconst = {"dbg_div",
+ "dummy_name"};

-static const char *dbgtrc_emio_input_names[] __initdata = {"trace_emio_clk"};
-static const char *gem0_emio_input_names[] __initdata = {"gem0_emio_clk"};
-static const char *gem1_emio_input_names[] __initdata = {"gem1_emio_clk"};
-static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"};
+static const char *dbgtrc_emio_input_names[] __initconst = {"trace_emio_clk"};
+static const char *gem0_emio_input_names[] __initconst = {"gem0_emio_clk"};
+static const char *gem1_emio_input_names[] __initconst = {"gem1_emio_clk"};
+static const char *swdt_ext_clk_input_names[] __initconst = {"swdt_ext_clk"};

static void __init zynq_clk_register_fclk(enum zynq_clk fclk,
const char *clk_name, void __iomem *fclk_ctrl_reg,
@@ -230,6 +228,7 @@ static void __init zynq_clk_setup(struct device_node *np)
const char *periph_parents[4];
const char *swdt_ext_clk_mux_parents[2];
const char *can_mio_mux_parents[NUM_MIO_PINS];
+ const char *dummy_nm = "dummy_name";

pr_info("Zynq clock init\n");

--
2.1.0.1.g27b9230