From mboxrd@z Thu Jan 1 00:00:00 1970 From: peter.griffin@linaro.org (Peter Griffin) Date: Tue, 9 Sep 2014 10:00:14 +0100 Subject: [PATCH v2 0/4] Add picoPHY usb phy driver found on stih407 family SoC's Message-ID: <1410253218-18318-1-git-send-email-peter.griffin@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This series adds support for the picoPHY usb phy which is used by the usb2 and usb3 host controllers when controlling usb2/1.1 devices. It is found on stih407 family SoC's from the consumer electronics devision of STMicroelectronics. Changes since v1: - Remove reference to stih410 in dt documentation - Fix alignment issue in dt example - usbpicophy at f8 since you have a reg property Peter Griffin (4): phy: phy-stih407-usb: Add usb picoPHY driver found on stih407 SoC family phy: phy-stih407-usb: Add dt documentation for USB picophy found on stih407 SoC family MAINTAINERS: Add phy-stih407-usb.c file to ARCH/STI architecture ARM: multi_v7_defconfig: Enable stih407 usb picophy .../devicetree/bindings/phy/phy-stih407-usb.txt | 30 ++++ MAINTAINERS | 1 + arch/arm/configs/multi_v7_defconfig | 1 + drivers/phy/Kconfig | 8 + drivers/phy/Makefile | 2 + drivers/phy/phy-stih407-usb.c | 185 +++++++++++++++++++++ 6 files changed, 227 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-stih407-usb.txt create mode 100644 drivers/phy/phy-stih407-usb.c -- 1.9.1