From: carlo@caione.org (Carlo Caione)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 8/9] ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
Date: Thu, 11 Sep 2014 22:11:39 +0200 [thread overview]
Message-ID: <1410466300-19168-9-git-send-email-carlo@caione.org> (raw)
In-Reply-To: <1410466300-19168-1-git-send-email-carlo@caione.org>
The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex
A9 and an ARM Mali-400 GPU.
This patch adds two basic DTSI for the preliminary support of Meson and
Meson6 SoCs. Another DTS is also added for supporting the atv1200 board,
produced by Geniatech inc.
Signed-off-by: Carlo Caione <carlo@caione.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/meson.dtsi | 74 ++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/meson6-atv1200.dts | 25 ++++++++++++
arch/arm/boot/dts/meson6.dtsi | 40 +++++++++++++++++++
4 files changed, 140 insertions(+)
create mode 100644 arch/arm/boot/dts/meson.dtsi
create mode 100644 arch/arm/boot/dts/meson6-atv1200.dts
create mode 100644 arch/arm/boot/dts/meson6.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index adb5ed9..4e2bb17 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -154,6 +154,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
+dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MXC) += \
imx25-eukrea-mbimxsd25-baseboard.dtb \
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
new file mode 100644
index 0000000..ace5db8
--- /dev/null
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ serial2 = &uart_B;
+ serial3 = &uart_C;
+ };
+
+ gic: interrupt-controller at c4301000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0xc4301000 0x1000>,
+ <0xc4300100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ timer at c1109940 {
+ compatible = "amlogic,meson6-timer";
+ reg = <0xc1109940 0x14>;
+ interrupts = <0 10 1>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ uart_AO: serial at c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clk81>;
+ status = "disabled";
+ };
+
+ uart_A: serial at c81084c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81084c0 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clk81>;
+ status = "disabled";
+ };
+
+ uart_B: serial at c81084dc {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81084dc 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clk81>;
+ status = "disabled";
+ };
+
+ uart_C: serial at c8108700 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc8108700 0x14>;
+ interrupts = <0 90 1>;
+ clocks = <&clk81>;
+ status = "disabled";
+ };
+ };
+}; /* end of / */
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
new file mode 100644
index 0000000..84576aa
--- /dev/null
+++ b/arch/arm/boot/dts/meson6-atv1200.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/include/ "meson6.dtsi"
+
+/ {
+ model = "Geniatech ATV1200";
+ compatible = "geniatech,atv1200";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
new file mode 100644
index 0000000..f9d2cb5
--- /dev/null
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "meson.dtsi"
+
+/ {
+ model = "Amlogic Meson6 SoC";
+ compatible = "amlogic,meson6";
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x200>;
+ };
+
+ cpu at 201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x201>;
+ };
+ };
+
+ clk81: clk at 0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ };
+}; /* end of / */
--
1.9.1
next prev parent reply other threads:[~2014-09-11 20:11 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-11 20:11 [PATCH v2 0/9] ARM: meson: add preliminary support for MesonX/Meson6 SoCs Carlo Caione
2014-09-11 20:11 ` [PATCH v2 1/9] ARM: meson: debug: add debug UART for earlyprintk support Carlo Caione
2014-09-11 20:11 ` [PATCH v2 2/9] ARM: meson: documentation: add UART documentation Carlo Caione
2014-09-11 20:11 ` [PATCH v2 3/9] ARM: meson: serial: add MesonX SoC on-chip uart driver Carlo Caione
2014-09-11 21:25 ` Greg KH
2014-09-12 6:59 ` Carlo Caione
2014-09-11 20:11 ` [PATCH v2 4/9] ARM: meson: documentation: add timer documentation Carlo Caione
2014-09-11 20:59 ` Arnd Bergmann
2014-09-11 20:11 ` [PATCH v2 5/9] ARM: meson6: clocksource: add Meson6 timer support Carlo Caione
2014-09-11 20:57 ` Arnd Bergmann
2014-09-16 9:06 ` Matthias Brugger
2014-09-11 20:11 ` [PATCH v2 6/9] ARM: meson: documentation: add bindings documentation Carlo Caione
2014-09-11 20:11 ` [PATCH v2 7/9] ARM: meson: add basic support for MesonX SoCs Carlo Caione
2014-09-11 20:11 ` Carlo Caione [this message]
2014-09-11 21:03 ` [PATCH v2 8/9] ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS Arnd Bergmann
2014-09-11 20:11 ` [PATCH v2 9/9] ARM: meson: update multi_v7_defconfig Carlo Caione
2014-09-11 21:01 ` [PATCH v2 0/9] ARM: meson: add preliminary support for MesonX/Meson6 SoCs Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410466300-19168-9-git-send-email-carlo@caione.org \
--to=carlo@caione.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox