[PATCH] ARM: dts: Add Maxim 77693 PMIC to the Trats2 board

[k.kozlowski@samsung.com (Krzysztof Kozlowski)]

On pon, 2014-09-15 at 16:36 +0200, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On Fri, Sep 12, 2014 at 2:03 PM, Krzysztof Kozlowski
> <k.kozlowski@samsung.com> wrote:
> > +       i2c_max77693: i2c-gpio-1 {
> > +               compatible = "i2c-gpio";
> > +               gpios = <&gpm2 0 0>, <&gpm2 1 0 >;
> 
> Can you please include <dt-bindings/gpio/gpio.h> and use
> GPIO_ACTIVE_HIGH instead of 0 here for the type/level flags?

Sure!

> 
> > +               i2c-gpio,delay-us = <2>;
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               status = "okay";
> > +
> > +               max77693 at 66 {
> > +                       compatible = "maxim,max77693";
> > +                       interrupt-parent = <&gpx1>;
> > +                       interrupts = <5 2>;
> > +                       reg = <0x66>;
> > +
> > +                       regulators {
> > +                               esafeout1_reg: esafeout at 1 {
> > +                                       regulator-compatible = "ESAFEOUT1";
> 
> According to Documentation/devicetree/bindings/regulator/regulator.txt,
> the "regulator-compatible" DT property has been deprecated in favor of
> just using the regulator node's name.

OK

> 
> > +                                       regulator-name = "ESAFEOUT1";
> > +                               };
> > +                               esafeout2_reg: esafeout at 2 {
> > +                                       regulator-compatible = "ESAFEOUT2";
> > +                                       regulator-name = "ESAFEOUT2";
> > +                               };
> > +                               charger_reg: charger at 0 {
> > +                                       regulator-compatible = "CHARGER";
> > +                                       regulator-name = "CHARGER";
> > +                                       regulator-min-microamp = <60000>;
> > +                                       regulator-max-microamp = <2580000>;
> > +                               };
> > +                       };
> > +               };
> > +       };
> > +
> >         mmc at 12550000 {
> >                 num-slots = <1>;
> >                 supports-highspeed;
> >
> 
> Once those two issues are addressed, feel free to add my
> 
> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Thank you for feedback!

Best regards,
Krzysztof

> 
> Best regards,
> Javier