From mboxrd@z Thu Jan 1 00:00:00 1970 From: sboyd@codeaurora.org (Stephen Boyd) Date: Fri, 19 Sep 2014 16:50:51 -0700 Subject: [PATCH 2/2] ARM: DT: msm8960: Add sdcc nodes In-Reply-To: <1411170651-28855-1-git-send-email-sboyd@codeaurora.org> References: <1411170651-28855-1-git-send-email-sboyd@codeaurora.org> Message-ID: <1411170651-28855-2-git-send-email-sboyd@codeaurora.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add the sdcc nodes to support the SD card controller using pl180 mmci driver. We also add a temporary fixed regulator until the regulator driver is mainlined. Cc: Srinivas Kandagatla Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 12 ++++++++ arch/arm/boot/dts/qcom-msm8960.dtsi | 50 ++++++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 8b10812c0cda..7f70fae90959 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -14,6 +14,18 @@ status = "ok"; }; }; + + amba { + /* eMMC */ + sdcc1: sdcc at 12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc at 12180000 { + status = "okay"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 2f677247744d..e1b0d5cd9e3c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include #include #include @@ -188,5 +189,54 @@ clocks = <&gcc PRNG_CLK>; clock-names = "core"; }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc at 12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc3: sdcc at 12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x8000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + }; + }; }; }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation