linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: linux@rempel-privat.de (Oleksij Rempel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/8] ARM: dts: add DT for Alphascale ASM9260 SoC
Date: Sun, 21 Sep 2014 20:45:47 +0200	[thread overview]
Message-ID: <1411325151-15107-3-git-send-email-linux@rempel-privat.de> (raw)
In-Reply-To: <1411325151-15107-1-git-send-email-linux@rempel-privat.de>

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
---
 arch/arm/boot/dts/Makefile                      |   2 +
 arch/arm/boot/dts/alphascale-asm9260-devkit.dts |  15 +++
 arch/arm/boot/dts/alphascale-asm9260.dtsi       | 166 ++++++++++++++++++++++++
 3 files changed, 183 insertions(+)
 create mode 100644 arch/arm/boot/dts/alphascale-asm9260-devkit.dts
 create mode 100644 arch/arm/boot/dts/alphascale-asm9260.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3..8943d72 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -492,6 +492,8 @@ dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
 	dove-d3plug.dtb \
 	dove-dove-db.dtb
 
+dtb-$(CONFIG_MACH_ASM9260) += alphascale-asm9260-devkit.dtb
+
 targets += dtbs dtbs_install
 targets += $(dtb-y)
 endif
diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
new file mode 100644
index 0000000..5d178f2
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
@@ -0,0 +1,15 @@
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+	model = "Alphascale asm9260 Development Kit";
+	compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+
+	chosen {
+		bootargs = "mem=32M earlyprintk=serial console=ttyS4,115200n8 root=/dev/mtdblock1 init=/linuxrc mtdparts=NAND:4M at 10M(logo)ro,60M at 14M(root)ro";
+	};
+
+};
+&uart4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi
new file mode 100644
index 0000000..3ea4e03
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale-asm9260.dtsi
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+	interrupt-parent = <&icoll>;
+
+        aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+        };
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			clocks = <&acc CLKID_SYS_CPU>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc24m: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-accuracy = <30000>;
+		};
+
+		i2s0_mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-accuracy = <30000>;
+		};
+
+		i2s1_mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-accuracy = <30000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+                ranges;
+
+		acc: clock-controller at 80040000 {
+			compatible = "alphascale,asm9260-clock-controller";
+			#clock-cells = <1>;
+			clocks = <&osc24m>;
+			reg = <0x80040000 0x500>;
+		};
+
+		icoll: interrupt-controller at 80054000 {
+			compatible = "alphascale,asm9260-icall";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x80054000 0x200>;
+		};
+
+		uart0: serial at 80000000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x80000000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART0>, <&acc CLKID_AHB_UART0>;
+			interrupts = <15>;
+			status = "disabled";
+		};
+		uart1: serial at 80004000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x80004000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART1>, <&acc CLKID_AHB_UART1>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+		uart2: serial at 80008000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x80008000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART2>, <&acc CLKID_AHB_UART2>;
+			interrupts = <17>;
+			status = "disabled";
+		};
+		uart3: serial at 8000c000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x8000c000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART3>, <&acc CLKID_AHB_UART3>;
+			interrupts = <18>;
+			status = "disabled";
+		};
+		uart4: serial at 80010000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x80010000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+			interrupts = <19>;
+			status = "disabled";
+		};
+		uart5: serial at 80014000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x80014000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART5>, <&acc CLKID_AHB_UART5>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+		uart6: serial at 80018000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x80018000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART6>, <&acc CLKID_AHB_UART6>;
+			interrupts = <21>;
+			status = "disabled";
+		};
+		uart7: serial at 8001c000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x8001c000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART7>, <&acc CLKID_AHB_UART7>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+		uart8: serial at 80020000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x80020000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART8>, <&acc CLKID_AHB_UART8>;
+			interrupts = <23>;
+			status = "disabled";
+		};
+		uart9: serial at 80024000 {
+			compatible = "alphascale,asm9260-uart";
+			reg = <0x80024000 0x4000>;
+			clocks = <&acc CLKID_SYS_UART9>, <&acc CLKID_AHB_UART9>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
+		timer0: timer at 80088000 {
+			compatible = "alphascale,asm9260-timer";
+			reg = <0x80088000 0x4000>;
+			clocks = <&acc CLKID_AHB_TIMER0>;
+			interrupts = <29>;
+		};
+	};
+};
-- 
1.9.1

  parent reply	other threads:[~2014-09-21 18:45 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-21 18:41 [PATCH v2 0/8] initial suport for Alpscale ASM9260 Oleksij Rempel
2014-09-21 18:41 ` [PATCH v2 1/8] ARM: add mach-asm9260 Oleksij Rempel
2014-09-22 15:08   ` Arnd Bergmann
2014-09-23  9:00     ` Oleksij Rempel
2014-09-23 10:19       ` Arnd Bergmann
2014-09-24  8:00         ` Oleksij Rempel
2014-09-24  9:43           ` Russell King - ARM Linux
2014-09-24  9:56             ` Oleksij Rempel
2014-09-24 10:25               ` Russell King - ARM Linux
2014-09-24 10:33                 ` Arnd Bergmann
2014-09-24 11:30                   ` Oleksij Rempel
2014-09-21 18:41 ` [PATCH v2 2/8] add include/debug/asm9260.S Oleksij Rempel
2014-09-21 18:45 ` Oleksij Rempel
2014-09-21 18:45   ` [PATCH v2 3/8] add alphascale,asm9260.h binding Oleksij Rempel
2014-09-24 10:15     ` Mark Rutland
2014-09-21 18:45   ` Oleksij Rempel [this message]
2014-09-22 15:14     ` [PATCH v2 4/8] ARM: dts: add DT for Alphascale ASM9260 SoC Arnd Bergmann
2014-09-24 10:11     ` Mark Rutland
2014-09-21 18:45   ` [PATCH v2 5/8] clk: add clk-asm9260 driver Oleksij Rempel
2014-09-21 18:45   ` [PATCH v2 6/8] clocksource: add asm9260_timer driver Oleksij Rempel
2014-09-21 18:45   ` [PATCH v2 7/8] irqchip: add irq-asm9260 driver Oleksij Rempel
2014-09-22 15:22     ` Arnd Bergmann
2014-09-21 18:45   ` [PATCH v2 8/8] tty/serial: add asm9260-serial driver Oleksij Rempel
2014-09-22 15:26     ` Arnd Bergmann
2014-09-22 16:04       ` Oleksij Rempel
2014-09-24  9:24       ` Oleksij Rempel
2014-09-24 10:20         ` Arnd Bergmann
2014-09-23 11:32 ` [PATCH v2 0/8] initial suport for Alpscale ASM9260 Arnd Bergmann
2014-09-24 10:13 ` Mark Rutland
2014-10-07  8:55 ` [PATCH v3 0/9] initial suport for Alphascale ASM9260 Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 1/9] ARM: add mach-asm9260 Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 2/9] arm: add lolevel debug support for asm9260 Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 3/9] ARM: dts: add DT for Alphascale ASM9260 SoC Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 4/9] ARM: add alphascale,acc.txt bindings documentation Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 5/9] ARM: clk: add clk-asm9260 driver Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 6/9] clocksource: add asm9260_timer driver Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 7/9] irqchip/irq-mxs.c: add asm9260 support Oleksij Rempel
2014-10-08  7:45     ` Thomas Gleixner
2014-10-08 12:11       ` [PATCH v4 1/2] irqchip: mxs: prepare driver for HW with different offsets Oleksij Rempel
2014-10-08 12:11         ` [PATCH v4 2/2] irqchip: mxs: add Alpascale ASM9260 support Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 8/9] tty/serial/mxs-auart.c: add initial Alphascale " Oleksij Rempel
2014-10-07  8:55   ` [PATCH v3 9/9] add Alphascale to vendor-prefixes.txt Oleksij Rempel
2014-10-10  5:38   ` [PATCH v3 0/9] initial suport for Alphascale ASM9260 Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411325151-15107-3-git-send-email-linux@rempel-privat.de \
    --to=linux@rempel-privat.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).