From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (Antoine Tenart) Date: Tue, 23 Sep 2014 14:15:30 +0200 Subject: [PATCH v4 3/9] Documentation: bindings: net: add the Marvell PXA168 Ethernet controller In-Reply-To: <1411474536-22626-1-git-send-email-antoine.tenart@free-electrons.com> References: <1411474536-22626-1-git-send-email-antoine.tenart@free-electrons.com> Message-ID: <1411474536-22626-4-git-send-email-antoine.tenart@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This adds the binding documentation for the Marvell PXA168 Ethernet controller, following its DT support. Signed-off-by: Antoine Tenart --- .../devicetree/bindings/net/marvell-pxa168.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell-pxa168.txt diff --git a/Documentation/devicetree/bindings/net/marvell-pxa168.txt b/Documentation/devicetree/bindings/net/marvell-pxa168.txt new file mode 100644 index 000000000000..4177abf3dac3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-pxa168.txt @@ -0,0 +1,21 @@ +* Marvell PXA168 Ethernet Controller + +Required properties: +- compatible: should be "marvell,pxa168-eth". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device. +- clocks: pointer to the clock for the device. + +Optional properties: +- port-id: should be '0','1' or '2'. +- phy-addr: MDIO address of the PHY. +- local-mac-address: see ethernet.txt file in the same directory. + +Example: + + eth0: ethernet at f7b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xf7b90000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = ; + }; -- 1.9.1