From: b38611@freescale.com (Fugang Duan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 2/3] ARM: imx: add enet init for i.mx6sx
Date: Wed, 24 Sep 2014 10:11:19 +0800 [thread overview]
Message-ID: <1411524680-12863-3-git-send-email-b38611@freescale.com> (raw)
In-Reply-To: <1411524680-12863-1-git-send-email-b38611@freescale.com>
Add enet init for i.mx6sx:
- Add phy ar8031 fixup
- Set enet clock source from internal PLL
Signed-off-by: Fugang Duan <B38611@freescale.com>
---
arch/arm/mach-imx/mach-imx6sx.c | 51 +++++++++++++++++++++++++++++++++++++++
1 files changed, 51 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 3de3b73..9822249 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -8,12 +8,62 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include "cpuidle.h"
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+ u16 val;
+
+ /* Set RGMII IO voltage to 1.8V */
+ phy_write(dev, 0x1d, 0x1f);
+ phy_write(dev, 0x1e, 0x8);
+
+ /* introduce tx clock delay */
+ phy_write(dev, 0x1d, 0x5);
+ val = phy_read(dev, 0x1e);
+ val |= 0x0100;
+ phy_write(dev, 0x1e, val);
+
+ return 0;
+}
+
+#define PHY_ID_AR8031 0x004dd074
+static void __init imx6sx_enet_phy_init(void)
+{
+ if (IS_BUILTIN(CONFIG_PHYLIB))
+ phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+ ar8031_phy_fixup);
+}
+
+static void __init imx6sx_enet_clk_sel(void)
+{
+ struct regmap *gpr;
+
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr");
+ if (!IS_ERR(gpr)) {
+ regmap_update_bits(gpr, IOMUXC_GPR1,
+ IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0);
+ regmap_update_bits(gpr, IOMUXC_GPR1,
+ IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0);
+ } else {
+ pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n");
+ }
+}
+
+static inline void imx6sx_enet_init(void)
+{
+ imx6sx_enet_phy_init();
+ imx6sx_enet_clk_sel();
+}
+
static void __init imx6sx_init_machine(void)
{
struct device *parent;
@@ -26,6 +76,7 @@ static void __init imx6sx_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+ imx6sx_enet_init();
imx_anatop_init();
imx6sx_pm_init();
}
--
1.7.8
next prev parent reply other threads:[~2014-09-24 2:11 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-24 2:11 [PATCH v1 0/3] ARM: imx6sx: add enet support Fugang Duan
2014-09-24 2:11 ` [PATCH v1 1/3] ARM: imx6sx: add imx6sx iomux-gpr field define Fugang Duan
2014-09-24 2:11 ` Fugang Duan [this message]
2014-09-24 2:11 ` [PATCH v1 3/3] ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board Fugang Duan
2014-09-28 3:28 ` Shawn Guo
2014-09-28 3:34 ` fugang.duan at freescale.com
2014-09-28 3:42 ` Shawn Guo
2014-09-28 5:20 ` fugang.duan at freescale.com
2014-09-28 5:32 ` Shawn Guo
2014-09-28 5:40 ` fugang.duan at freescale.com
2014-09-28 3:45 ` [PATCH v1 0/3] ARM: imx6sx: add enet support Shawn Guo
-- strict thread matches above, loose matches on Subject: below --
2014-09-23 9:36 Fugang Duan
2014-09-23 9:36 ` [PATCH v1 2/3] ARM: imx: add enet init for i.mx6sx Fugang Duan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411524680-12863-3-git-send-email-b38611@freescale.com \
--to=b38611@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).