From: jiang.liu@linux.intel.com (Jiang Liu)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFT v2 17/24] iommu/vt-d: Clean up unused MSI related code
Date: Fri, 26 Sep 2014 22:02:18 +0800 [thread overview]
Message-ID: <1411740145-30626-18-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1411740145-30626-1-git-send-email-jiang.liu@linux.intel.com>
Now MSI interrupt has been converted to new hierarchy irqdomain
interfaces, so kill legacy MSI related code.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
drivers/iommu/intel_irq_remapping.c | 144 -----------------------------------
1 file changed, 144 deletions(-)
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 166a73a3b551..8be4f924cb7c 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -146,44 +146,6 @@ static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
return qi_submit_sync(&desc, iommu);
}
-static int map_irq_to_irte_handle(int irq, u16 *sub_handle)
-{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- unsigned long flags;
- int index;
-
- if (!irq_iommu)
- return -1;
-
- raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
- *sub_handle = irq_iommu->sub_handle;
- index = irq_iommu->irte_index;
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
- return index;
-}
-
-static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
-{
- struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
- struct irq_cfg *cfg = irq_cfg(irq);
- unsigned long flags;
-
- if (!irq_iommu)
- return -1;
-
- raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
-
- cfg->remapped = 1;
- irq_iommu->iommu = iommu;
- irq_iommu->irte_index = index;
- irq_iommu->sub_handle = subhandle;
- irq_iommu->irte_mask = 0;
-
- raw_spin_unlock_irqrestore(&irq_2_ir_lock, flags);
-
- return 0;
-}
-
static int modify_irte(struct irq_2_iommu *irq_iommu,
struct irte *irte_modified)
{
@@ -1072,108 +1034,6 @@ intel_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
return 0;
}
-static void intel_compose_msi_msg(struct pci_dev *pdev,
- unsigned int irq, unsigned int dest,
- struct msi_msg *msg, u8 hpet_id)
-{
- struct irq_cfg *cfg;
- struct irte irte;
- u16 sub_handle = 0;
- int ir_index;
-
- cfg = irq_cfg(irq);
-
- ir_index = map_irq_to_irte_handle(irq, &sub_handle);
- BUG_ON(ir_index == -1);
-
- prepare_irte(&irte, cfg->vector, dest);
-
- /* Set source-id of interrupt request */
- if (pdev)
- set_msi_sid(&irte, pdev);
- else
- set_hpet_sid(&irte, hpet_id);
-
- modify_irte(irq_2_iommu(irq), &irte);
-
- msg->address_hi = MSI_ADDR_BASE_HI;
- msg->data = sub_handle;
- msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
- MSI_ADDR_IR_SHV |
- MSI_ADDR_IR_INDEX1(ir_index) |
- MSI_ADDR_IR_INDEX2(ir_index);
-}
-
-/*
- * Map the PCI dev to the corresponding remapping hardware unit
- * and allocate 'nvec' consecutive interrupt-remapping table entries
- * in it.
- */
-static int intel_msi_alloc_irq(struct pci_dev *dev, int irq, int nvec)
-{
- struct intel_iommu *iommu;
- int index;
-
- down_read(&dmar_global_lock);
- iommu = map_dev_to_ir(dev);
- if (!iommu) {
- printk(KERN_ERR
- "Unable to map PCI %s to iommu\n", pci_name(dev));
- index = -ENOENT;
- } else {
- index = alloc_irte(iommu, irq, irq_2_iommu(irq), nvec);
- if (index < 0) {
- printk(KERN_ERR
- "Unable to allocate %d IRTE for PCI %s\n",
- nvec, pci_name(dev));
- index = -ENOSPC;
- }
- }
- up_read(&dmar_global_lock);
-
- return index;
-}
-
-static int intel_msi_setup_irq(struct pci_dev *pdev, unsigned int irq,
- int index, int sub_handle)
-{
- struct intel_iommu *iommu;
- int ret = -ENOENT;
-
- down_read(&dmar_global_lock);
- iommu = map_dev_to_ir(pdev);
- if (iommu) {
- /*
- * setup the mapping between the irq and the IRTE
- * base index, the sub_handle pointing to the
- * appropriate interrupt remap table entry.
- */
- set_irte_irq(irq, iommu, index, sub_handle);
- ret = 0;
- }
- up_read(&dmar_global_lock);
-
- return ret;
-}
-
-static int intel_setup_hpet_msi(unsigned int irq, unsigned int id)
-{
- int ret = -1;
- struct intel_iommu *iommu;
- int index;
-
- down_read(&dmar_global_lock);
- iommu = map_hpet_to_ir(id);
- if (iommu) {
- index = alloc_irte(iommu, irq, irq_2_iommu(irq), 1);
- if (index >= 0)
- ret = 0;
- }
- up_read(&dmar_global_lock);
-
- return ret;
-}
-
static struct irq_domain *intel_get_ir_irq_domain(struct irq_alloc_info *info)
{
struct intel_iommu *iommu = NULL;
@@ -1250,10 +1110,6 @@ struct irq_remap_ops intel_irq_remap_ops = {
.setup_ioapic_entry = intel_setup_ioapic_entry,
.set_affinity = intel_ioapic_set_affinity,
.free_irq = free_irte,
- .compose_msi_msg = intel_compose_msi_msg,
- .msi_alloc_irq = intel_msi_alloc_irq,
- .msi_setup_irq = intel_msi_setup_irq,
- .setup_hpet_msi = intel_setup_hpet_msi,
.get_ir_irq_domain = intel_get_ir_irq_domain,
.get_irq_domain = intel_get_irq_domain,
.get_ioapic_entry = intel_get_ioapic_entry,
--
1.7.10.4
next prev parent reply other threads:[~2014-09-26 14:02 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 14:02 [RFT Part2 v2 00/24] Enable hierarchy irqdomian on x86 platforms Jiang Liu
2014-09-26 14:02 ` [RFT v2 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains Jiang Liu
2014-09-29 12:22 ` Abel
2014-09-29 15:53 ` Thomas Gleixner
2014-09-30 10:56 ` Abel
2014-09-30 21:49 ` Thomas Gleixner
2014-10-07 1:50 ` Jiang Liu
2014-10-07 1:26 ` Jiang Liu
2014-10-01 14:23 ` Joe.C
2014-10-22 7:24 ` Jiang Liu
2014-09-26 14:02 ` [RFT v2 02/24] genirq: Introduce helper functions to support stacked irq_chip Jiang Liu
2014-09-26 14:02 ` [RFT v2 03/24] x86, irq: Save destination CPU ID in irq_cfg Jiang Liu
2014-09-26 14:02 ` [RFT v2 04/24] x86, irq: Use hierarchy irqdomain to manage CPU interrupt vectors Jiang Liu
2014-09-26 14:02 ` [RFT v2 05/24] x86, hpet: Use new irqdomain interfaces to allocate/free IRQ Jiang Liu
2014-09-26 14:02 ` [RFT v2 06/24] x86, MSI: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 07/24] x86, uv: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 08/24] x86, htirq: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 09/24] x86, dmar: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 10/24] x86: irq_remapping: Introduce new interfaces to support hierarchy irqdomain Jiang Liu
2014-09-26 14:02 ` [RFT v2 11/24] iommu/vt-d: Change prototypes to prepare for enabling " Jiang Liu
2014-09-26 14:02 ` [RFT v2 12/24] iommu/vt-d: Enhance Intel IR driver to suppport " Jiang Liu
2014-09-26 14:02 ` [RFT v2 13/24] iommu/amd: Enhance AMD " Jiang Liu
2014-09-26 14:02 ` [RFT v2 14/24] x86, hpet: Enhance HPET IRQ to support " Jiang Liu
2014-09-26 14:02 ` [RFT v2 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts Jiang Liu
2014-09-26 14:02 ` [RFT v2 16/24] x86, irq: Directly call native_compose_msi_msg() for DMAR IRQ Jiang Liu
2014-09-26 14:02 ` Jiang Liu [this message]
2014-09-26 14:02 ` [RFT v2 18/24] iommu/amd: Clean up unused MSI related code Jiang Liu
2014-09-26 14:02 ` [RFT v2 19/24] x86: irq_remapping: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 20/24] x86, irq: Clean up unused MSI related code and interfaces Jiang Liu
2014-09-26 14:02 ` [RFT v2 21/24] iommu/vt-d: Refine the interfaces to create IRQ for DMAR unit Jiang Liu
2014-09-26 14:02 ` [RFT v2 22/24] x86, irq: Use hierarchy irqdomain to manage DMAR interrupts Jiang Liu
2014-09-26 14:02 ` [RFT v2 23/24] x86, htirq: Use hierarchy irqdomain to manage Hypertransport interrupts Jiang Liu
2014-09-26 14:02 ` [RFT v2 24/24] x86, uv: Use hierarchy irqdomain to manage UV interrupts Jiang Liu
2014-09-26 14:29 ` [RFT Part2 v2 00/24] Enable hierarchy irqdomian on x86 platforms Borislav Petkov
2014-09-26 16:30 ` Aravind Gopalakrishnan
2014-09-28 11:05 ` Borislav Petkov
2014-09-28 11:15 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411740145-30626-18-git-send-email-jiang.liu@linux.intel.com \
--to=jiang.liu@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).