From: jiang.liu@linux.intel.com (Jiang Liu)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFT v2 08/24] x86, htirq: Use new irqdomain interfaces to allocate/free IRQ
Date: Fri, 26 Sep 2014 22:02:09 +0800 [thread overview]
Message-ID: <1411740145-30626-9-git-send-email-jiang.liu@linux.intel.com> (raw)
In-Reply-To: <1411740145-30626-1-git-send-email-jiang.liu@linux.intel.com>
Use new irqdomain interfaces to allocate/free IRQ for HTIRQ, so we could
kill GENERIC_IRQ_LEGACY_ALLOC_HWIRQ later.
This patch changes the interfaces between arch independent PCI driver
and arch specific code. Currently HT_IRQ is only enabled on x86, so it
shouldn't break other architectures.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
arch/x86/kernel/apic/htirq.c | 26 +++++++++++++-------------
drivers/pci/htirq.c | 7 +++----
include/linux/htirq.h | 2 ++
3 files changed, 18 insertions(+), 17 deletions(-)
diff --git a/arch/x86/kernel/apic/htirq.c b/arch/x86/kernel/apic/htirq.c
index 6f527b02ac4c..9a662b2d92da 100644
--- a/arch/x86/kernel/apic/htirq.c
+++ b/arch/x86/kernel/apic/htirq.c
@@ -14,6 +14,7 @@
#include <linux/device.h>
#include <linux/pci.h>
#include <linux/htirq.h>
+#include <linux/irqdomain.h>
#include <asm/hw_irq.h>
#include <asm/apic.h>
#include <asm/hypertransport.h>
@@ -60,31 +61,30 @@ static struct irq_chip ht_irq_chip = {
.irq_retrigger = apic_retrigger_irq,
};
+int arch_alloc_ht_irq(struct pci_dev *dev)
+{
+ return irq_domain_alloc_irqs(NULL, 1, dev_to_node(&dev->dev), NULL);
+}
+
+void arch_free_ht_irq(int irq)
+{
+ irq_domain_free_irqs(irq, 1);
+}
+
int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
{
struct irq_cfg *cfg;
struct ht_irq_msg msg;
- unsigned dest;
- int err;
if (disable_apic)
return -ENXIO;
cfg = irq_cfg(irq);
- err = assign_irq_vector(irq, cfg, apic->target_cpus());
- if (err)
- return err;
-
- err = apic->cpu_mask_to_apicid_and(cfg->domain,
- apic->target_cpus(), &dest);
- if (err)
- return err;
-
- msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
+ msg.address_hi = HT_IRQ_HIGH_DEST_ID(cfg->dest_apicid);
msg.address_lo =
HT_IRQ_LOW_BASE |
- HT_IRQ_LOW_DEST_ID(dest) |
+ HT_IRQ_LOW_DEST_ID(cfg->dest_apicid) |
HT_IRQ_LOW_VECTOR(cfg->vector) |
((apic->irq_dest_mode == 0) ?
HT_IRQ_LOW_DM_PHYSICAL :
diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c
index a94dd2c4183a..ceb0ebeb7b5f 100644
--- a/drivers/pci/htirq.c
+++ b/drivers/pci/htirq.c
@@ -117,8 +117,8 @@ int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update)
cfg->msg.address_lo = 0xffffffff;
cfg->msg.address_hi = 0xffffffff;
- irq = irq_alloc_hwirq(dev_to_node(&dev->dev));
- if (!irq) {
+ irq = arch_alloc_ht_irq(dev);
+ if (irq <= 0) {
kfree(cfg);
return -EBUSY;
}
@@ -163,8 +163,7 @@ void ht_destroy_irq(unsigned int irq)
cfg = irq_get_handler_data(irq);
irq_set_chip(irq, NULL);
irq_set_handler_data(irq, NULL);
- irq_free_hwirq(irq);
-
+ arch_free_ht_irq(irq);
kfree(cfg);
}
EXPORT_SYMBOL(ht_destroy_irq);
diff --git a/include/linux/htirq.h b/include/linux/htirq.h
index 70a1dbbf2093..5caa51b7b95c 100644
--- a/include/linux/htirq.h
+++ b/include/linux/htirq.h
@@ -15,6 +15,8 @@ void unmask_ht_irq(struct irq_data *data);
/* The arch hook for getting things started */
int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev);
+int arch_alloc_ht_irq(struct pci_dev *dev);
+void arch_free_ht_irq(int irq);
/* For drivers of buggy hardware */
typedef void (ht_irq_update_t)(struct pci_dev *dev, int irq,
--
1.7.10.4
next prev parent reply other threads:[~2014-09-26 14:02 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 14:02 [RFT Part2 v2 00/24] Enable hierarchy irqdomian on x86 platforms Jiang Liu
2014-09-26 14:02 ` [RFT v2 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains Jiang Liu
2014-09-29 12:22 ` Abel
2014-09-29 15:53 ` Thomas Gleixner
2014-09-30 10:56 ` Abel
2014-09-30 21:49 ` Thomas Gleixner
2014-10-07 1:50 ` Jiang Liu
2014-10-07 1:26 ` Jiang Liu
2014-10-01 14:23 ` Joe.C
2014-10-22 7:24 ` Jiang Liu
2014-09-26 14:02 ` [RFT v2 02/24] genirq: Introduce helper functions to support stacked irq_chip Jiang Liu
2014-09-26 14:02 ` [RFT v2 03/24] x86, irq: Save destination CPU ID in irq_cfg Jiang Liu
2014-09-26 14:02 ` [RFT v2 04/24] x86, irq: Use hierarchy irqdomain to manage CPU interrupt vectors Jiang Liu
2014-09-26 14:02 ` [RFT v2 05/24] x86, hpet: Use new irqdomain interfaces to allocate/free IRQ Jiang Liu
2014-09-26 14:02 ` [RFT v2 06/24] x86, MSI: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 07/24] x86, uv: " Jiang Liu
2014-09-26 14:02 ` Jiang Liu [this message]
2014-09-26 14:02 ` [RFT v2 09/24] x86, dmar: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 10/24] x86: irq_remapping: Introduce new interfaces to support hierarchy irqdomain Jiang Liu
2014-09-26 14:02 ` [RFT v2 11/24] iommu/vt-d: Change prototypes to prepare for enabling " Jiang Liu
2014-09-26 14:02 ` [RFT v2 12/24] iommu/vt-d: Enhance Intel IR driver to suppport " Jiang Liu
2014-09-26 14:02 ` [RFT v2 13/24] iommu/amd: Enhance AMD " Jiang Liu
2014-09-26 14:02 ` [RFT v2 14/24] x86, hpet: Enhance HPET IRQ to support " Jiang Liu
2014-09-26 14:02 ` [RFT v2 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts Jiang Liu
2014-09-26 14:02 ` [RFT v2 16/24] x86, irq: Directly call native_compose_msi_msg() for DMAR IRQ Jiang Liu
2014-09-26 14:02 ` [RFT v2 17/24] iommu/vt-d: Clean up unused MSI related code Jiang Liu
2014-09-26 14:02 ` [RFT v2 18/24] iommu/amd: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 19/24] x86: irq_remapping: " Jiang Liu
2014-09-26 14:02 ` [RFT v2 20/24] x86, irq: Clean up unused MSI related code and interfaces Jiang Liu
2014-09-26 14:02 ` [RFT v2 21/24] iommu/vt-d: Refine the interfaces to create IRQ for DMAR unit Jiang Liu
2014-09-26 14:02 ` [RFT v2 22/24] x86, irq: Use hierarchy irqdomain to manage DMAR interrupts Jiang Liu
2014-09-26 14:02 ` [RFT v2 23/24] x86, htirq: Use hierarchy irqdomain to manage Hypertransport interrupts Jiang Liu
2014-09-26 14:02 ` [RFT v2 24/24] x86, uv: Use hierarchy irqdomain to manage UV interrupts Jiang Liu
2014-09-26 14:29 ` [RFT Part2 v2 00/24] Enable hierarchy irqdomian on x86 platforms Borislav Petkov
2014-09-26 16:30 ` Aravind Gopalakrishnan
2014-09-28 11:05 ` Borislav Petkov
2014-09-28 11:15 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411740145-30626-9-git-send-email-jiang.liu@linux.intel.com \
--to=jiang.liu@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).