linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: steve.capper@linaro.org (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 4/6] arm: mm: Enable RCU fast_gup
Date: Fri, 26 Sep 2014 15:03:51 +0100	[thread overview]
Message-ID: <1411740233-28038-5-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1411740233-28038-1-git-send-email-steve.capper@linaro.org>

Activate the RCU fast_gup for ARM. We also need to force THP splits to
broadcast an IPI s.t. we block in the fast_gup page walker. As THP
splits are comparatively rare, this should not lead to a noticeable
performance degradation.

Some pre-requisite functions pud_write and pud_page are also added.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig                      |  4 ++++
 arch/arm/include/asm/pgtable-3level.h |  8 ++++++++
 arch/arm/mm/flush.c                   | 15 +++++++++++++++
 3 files changed, 27 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cc740d2..0e5b47f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1645,6 +1645,10 @@ config ARCH_SELECT_MEMORY_MODEL
 config HAVE_ARCH_PFN_VALID
 	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
 
+config HAVE_GENERIC_RCU_GUP
+	def_bool y
+	depends on ARM_LPAE
+
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 16122d4..a31ecdad 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -224,6 +224,8 @@ static inline pte_t pte_mkspecial(pte_t pte)
 #define __HAVE_ARCH_PMD_WRITE
 #define pmd_write(pmd)		(pmd_isclear((pmd), L_PMD_SECT_RDONLY))
 #define pmd_dirty(pmd)		(pmd_isset((pmd), L_PMD_SECT_DIRTY))
+#define pud_page(pud)		pmd_page(__pmd(pud_val(pud)))
+#define pud_write(pud)		pmd_write(__pmd(pud_val(pud)))
 
 #define pmd_hugewillfault(pmd)	(!pmd_young(pmd) || !pmd_write(pmd))
 #define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
@@ -231,6 +233,12 @@ static inline pte_t pte_mkspecial(pte_t pte)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !pmd_table(pmd))
 #define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING))
+
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+			  pmd_t *pmdp);
+#endif
 #endif
 
 #define PMD_BIT_FUNC(fn,op) \
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 43d54f5..265b836 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -400,3 +400,18 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
 	 */
 	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+			  pmd_t *pmdp)
+{
+	pmd_t pmd = pmd_mksplitting(*pmdp);
+	VM_BUG_ON(address & ~PMD_MASK);
+	set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+
+	/* dummy IPI to serialise against fast_gup */
+	kick_all_cpus_sync();
+}
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-- 
1.9.3

  parent reply	other threads:[~2014-09-26 14:03 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-26 14:03 [PATCH V4 0/6] RCU get_user_pages_fast and __get_user_pages_fast Steve Capper
2014-09-26 14:03 ` [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast Steve Capper
2014-09-29 21:51   ` Hugh Dickins
2014-10-01 11:11     ` Catalin Marinas
2014-10-02 16:00     ` Steve Capper
2014-10-02 12:19   ` Andrea Arcangeli
2014-10-02 16:18     ` Steve Capper
2014-10-02 16:54       ` Andrea Arcangeli
2014-10-13  5:15     ` Aneesh Kumar K.V
2014-10-13  5:21       ` David Miller
2014-10-13 11:44         ` Steve Capper
2014-10-13 16:06           ` David Miller
2014-10-14 12:38             ` Steve Capper
2014-10-14 16:30               ` David Miller
2014-10-13 17:04           ` Aneesh Kumar K.V
2014-10-13  6:22   ` Aneesh Kumar K.V
2014-09-26 14:03 ` [PATCH V4 2/6] arm: mm: Introduce special ptes for LPAE Steve Capper
2014-09-26 14:03 ` [PATCH V4 3/6] arm: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-09-26 14:03 ` Steve Capper [this message]
2014-09-26 14:03 ` [PATCH V4 5/6] arm64: " Steve Capper
2014-09-26 14:03 ` [PATCH V4 6/6] arm64: mm: Enable RCU fast_gup Steve Capper
2015-02-27 12:42 ` [PATCH V4 0/6] RCU get_user_pages_fast and __get_user_pages_fast Jon Masters
2015-02-27 13:20   ` Mark Rutland
2015-03-02 14:16     ` Mark Rutland
     [not found]   ` <54F3C6AD.50300@redhat.com>
2015-03-02  5:58     ` PMD update corruption (sync question) Jon Masters
2015-03-02 10:50       ` Catalin Marinas
2015-03-02 11:06         ` Jon Masters
2015-03-02 12:31           ` Peter Zijlstra
2015-03-02 12:40             ` Geert Uytterhoeven
2015-03-02 22:21         ` Jon Masters
2015-03-02 22:29           ` Jon Masters
2015-03-03  9:06           ` Arnd Bergmann
2015-03-03 15:46             ` Jon Masters

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411740233-28038-5-git-send-email-steve.capper@linaro.org \
    --to=steve.capper@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).