From: steve.capper@linaro.org (Steve Capper)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 6/6] arm64: mm: Enable RCU fast_gup
Date: Fri, 26 Sep 2014 15:03:53 +0100 [thread overview]
Message-ID: <1411740233-28038-7-git-send-email-steve.capper@linaro.org> (raw)
In-Reply-To: <1411740233-28038-1-git-send-email-steve.capper@linaro.org>
Activate the RCU fast_gup for ARM64. We also need to force THP splits
to broadcast an IPI s.t. we block in the fast_gup page walker. As THP
splits are comparatively rare, this should not lead to a noticeable
performance degradation.
Some pre-requisite functions pud_write and pud_page are also added.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/Kconfig | 3 +++
arch/arm64/include/asm/pgtable.h | 21 ++++++++++++++++++++-
arch/arm64/mm/flush.c | 15 +++++++++++++++
3 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index ce9062b..435305e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -108,6 +108,9 @@ config GENERIC_CALIBRATE_DELAY
config ZONE_DMA
def_bool y
+config HAVE_GENERIC_RCU_GUP
+ def_bool y
+
config ARCH_DMA_ADDR_T_64BIT
def_bool y
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index ffe1ba0..6d81471 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -239,6 +239,16 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
#define __HAVE_ARCH_PTE_SPECIAL
+static inline pte_t pud_pte(pud_t pud)
+{
+ return __pte(pud_val(pud));
+}
+
+static inline pmd_t pud_pmd(pud_t pud)
+{
+ return __pmd(pud_val(pud));
+}
+
static inline pte_t pmd_pte(pmd_t pmd)
{
return __pte(pmd_val(pmd));
@@ -256,7 +266,13 @@ static inline pmd_t pte_pmd(pte_t pte)
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
#define pmd_trans_splitting(pmd) pte_special(pmd_pte(pmd))
-#endif
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
+struct vm_area_struct;
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+ pmd_t *pmdp);
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#define pmd_young(pmd) pte_young(pmd_pte(pmd))
#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd)))
@@ -277,6 +293,7 @@ static inline pmd_t pte_pmd(pte_t pte)
#define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot)
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
+#define pud_write(pud) pte_write(pud_pte(pud))
#define pud_pfn(pud) (((pud_val(pud) & PUD_MASK) & PHYS_MASK) >> PAGE_SHIFT)
#define set_pmd_at(mm, addr, pmdp, pmd) set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd))
@@ -376,6 +393,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
}
+#define pud_page(pud) pmd_page(pud_pmd(pud))
+
#endif /* CONFIG_ARM64_PGTABLE_LEVELS > 2 */
#if CONFIG_ARM64_PGTABLE_LEVELS > 3
diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
index 0d64089..2d5fd47 100644
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@@ -104,3 +104,18 @@ EXPORT_SYMBOL(flush_dcache_page);
*/
EXPORT_SYMBOL(flush_cache_all);
EXPORT_SYMBOL(flush_icache_range);
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
+ pmd_t *pmdp)
+{
+ pmd_t pmd = pmd_mksplitting(*pmdp);
+ VM_BUG_ON(address & ~PMD_MASK);
+ set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+
+ /* dummy IPI to serialise against fast_gup */
+ kick_all_cpus_sync();
+}
+#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
--
1.9.3
next prev parent reply other threads:[~2014-09-26 14:03 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 14:03 [PATCH V4 0/6] RCU get_user_pages_fast and __get_user_pages_fast Steve Capper
2014-09-26 14:03 ` [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast Steve Capper
2014-09-29 21:51 ` Hugh Dickins
2014-10-01 11:11 ` Catalin Marinas
2014-10-02 16:00 ` Steve Capper
2014-10-02 12:19 ` Andrea Arcangeli
2014-10-02 16:18 ` Steve Capper
2014-10-02 16:54 ` Andrea Arcangeli
2014-10-13 5:15 ` Aneesh Kumar K.V
2014-10-13 5:21 ` David Miller
2014-10-13 11:44 ` Steve Capper
2014-10-13 16:06 ` David Miller
2014-10-14 12:38 ` Steve Capper
2014-10-14 16:30 ` David Miller
2014-10-13 17:04 ` Aneesh Kumar K.V
2014-10-13 6:22 ` Aneesh Kumar K.V
2014-09-26 14:03 ` [PATCH V4 2/6] arm: mm: Introduce special ptes for LPAE Steve Capper
2014-09-26 14:03 ` [PATCH V4 3/6] arm: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-09-26 14:03 ` [PATCH V4 4/6] arm: mm: Enable RCU fast_gup Steve Capper
2014-09-26 14:03 ` [PATCH V4 5/6] arm64: mm: Enable HAVE_RCU_TABLE_FREE logic Steve Capper
2014-09-26 14:03 ` Steve Capper [this message]
2015-02-27 12:42 ` [PATCH V4 0/6] RCU get_user_pages_fast and __get_user_pages_fast Jon Masters
2015-02-27 13:20 ` Mark Rutland
2015-03-02 14:16 ` Mark Rutland
[not found] ` <54F3C6AD.50300@redhat.com>
2015-03-02 5:58 ` PMD update corruption (sync question) Jon Masters
2015-03-02 10:50 ` Catalin Marinas
2015-03-02 11:06 ` Jon Masters
2015-03-02 12:31 ` Peter Zijlstra
2015-03-02 12:40 ` Geert Uytterhoeven
2015-03-02 22:21 ` Jon Masters
2015-03-02 22:29 ` Jon Masters
2015-03-03 9:06 ` Arnd Bergmann
2015-03-03 15:46 ` Jon Masters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411740233-28038-7-git-send-email-steve.capper@linaro.org \
--to=steve.capper@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).