* [PATCH v2 0/2] socfpga: fix hotplug/add suspend to ram
@ 2014-10-01 19:38 atull at opensource.altera.com
2014-10-01 19:38 ` [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi atull at opensource.altera.com
2014-10-01 19:38 ` [PATCH v2 2/2] socfpga: support suspend to ram atull at opensource.altera.com
0 siblings, 2 replies; 8+ messages in thread
From: atull at opensource.altera.com @ 2014-10-01 19:38 UTC (permalink / raw)
To: linux-arm-kernel
From: Alan Tull <atull@opensource.altera.com>
Patch 1: socfpga: hotplug: put cpu1 in wfi
Fix how cpu1 is hotplugged to prevent increased power
consumption.
v2: no need to flush the caches
clean up spacing in comments
replace a register offset with a macro
Patch 2: socfpga: support suspend to ram
* allocate space in ocram
* Add a function to do suspend to ram and
place DDR in self-refresh
* This function lives in ocram
v2: use Generic on-chip SRAM driver to allocate ocram
rm fncpy_align since generic allocator handles alignment
check __arm_ioremap_exec return code
check for NULL pointers
add a comment regarding sdram controller configuration
Alan Tull (2):
socfpga: hotplug: put cpu1 in wfi
socfpga: support suspend to ram
arch/arm/mach-socfpga/Kconfig | 1 +
arch/arm/mach-socfpga/Makefile | 1 +
arch/arm/mach-socfpga/core.h | 7 ++
arch/arm/mach-socfpga/platsmp.c | 16 ++--
arch/arm/mach-socfpga/pm.c | 147 +++++++++++++++++++++++++++++++
arch/arm/mach-socfpga/self-refresh.S | 157 ++++++++++++++++++++++++++++++++++
arch/arm/mach-socfpga/socfpga.c | 10 +++
7 files changed, 333 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/mach-socfpga/pm.c
create mode 100644 arch/arm/mach-socfpga/self-refresh.S
--
1.7.9.5
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi 2014-10-01 19:38 [PATCH v2 0/2] socfpga: fix hotplug/add suspend to ram atull at opensource.altera.com @ 2014-10-01 19:38 ` atull at opensource.altera.com 2014-10-07 11:10 ` Pavel Machek 2014-10-01 19:38 ` [PATCH v2 2/2] socfpga: support suspend to ram atull at opensource.altera.com 1 sibling, 1 reply; 8+ messages in thread From: atull at opensource.altera.com @ 2014-10-01 19:38 UTC (permalink / raw) To: linux-arm-kernel From: Alan Tull <atull@opensource.altera.com> Use WFI when putting CPU1 to sleep. Don't hold CPU1 in reset since that results in increased power consumption. Reset CPU1 briefly during CPU1 bootup. This has been tested for hotplug and suspend/resume and results in no increased power consumption. Signed-off-by: Alan Tull <atull@opensource.altera.com> v2: no need to flush the caches clean up spacing in comments replace a register offset with a macro --- arch/arm/mach-socfpga/core.h | 3 +++ arch/arm/mach-socfpga/platsmp.c | 16 ++++++++++------ 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 572b8f7..953a9c0 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -21,6 +21,7 @@ #define __MACH_CORE_H #define SOCFPGA_RSTMGR_CTRL 0x04 +#define SOCFPGA_RSTMGR_MODMPURST 0x10 #define SOCFPGA_RSTMGR_MODPERRST 0x14 #define SOCFPGA_RSTMGR_BRGMODRST 0x1c @@ -28,6 +29,8 @@ #define RSTMGR_CTRL_SWCOLDRSTREQ 0x1 /* Cold Reset */ #define RSTMGR_CTRL_SWWARMRSTREQ 0x2 /* Warm Reset */ +#define RSTMGR_MPUMODRST_CPU1 0x2 /* CPU1 Reset */ + extern void socfpga_secondary_startup(void); extern void __iomem *socfpga_scu_base_addr; diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 5356a72..97907dd 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -34,6 +34,10 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; if (cpu1start_addr) { + /* This will put CPU #1 into reset. */ + __raw_writel(RSTMGR_MPUMODRST_CPU1, + rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); + memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); __raw_writel(virt_to_phys(socfpga_secondary_startup), @@ -43,8 +47,9 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) smp_wmb(); outer_clean_range(0, trampoline_size); - /* This will release CPU #1 out of reset.*/ - __raw_writel(0, rst_manager_base_addr + 0x10); + /* This will release CPU #1 out of reset. */ + __raw_writel(0, + rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); } return 0; @@ -86,10 +91,9 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus) */ static void socfpga_cpu_die(unsigned int cpu) { - cpu_do_idle(); - - /* We should have never returned from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* Do WFI. If we wake up early, go back into WFI */ + while (1) + cpu_do_idle(); } struct smp_operations socfpga_smp_ops __initdata = { -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi 2014-10-01 19:38 ` [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi atull at opensource.altera.com @ 2014-10-07 11:10 ` Pavel Machek 2014-10-07 14:19 ` atull 0 siblings, 1 reply; 8+ messages in thread From: Pavel Machek @ 2014-10-07 11:10 UTC (permalink / raw) To: linux-arm-kernel On Wed 2014-10-01 14:38:23, atull at opensource.altera.com wrote: > From: Alan Tull <atull@opensource.altera.com> > > Use WFI when putting CPU1 to sleep. Don't hold CPU1 in reset > since that results in increased power consumption. > > Reset CPU1 briefly during CPU1 bootup. > > This has been tested for hotplug and suspend/resume and results > in no increased power consumption. > > Signed-off-by: Alan Tull <atull@opensource.altera.com> It is nice to Cc people who commented ont the patch before. > if (cpu1start_addr) { > + /* This will put CPU #1 into reset. */ > + __raw_writel(RSTMGR_MPUMODRST_CPU1, > + rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); > + I thought conclusion was to use writel (not __raw variant) here? -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi 2014-10-07 11:10 ` Pavel Machek @ 2014-10-07 14:19 ` atull 0 siblings, 0 replies; 8+ messages in thread From: atull @ 2014-10-07 14:19 UTC (permalink / raw) To: linux-arm-kernel On Tue, 7 Oct 2014, Pavel Machek wrote: > On Wed 2014-10-01 14:38:23, atull at opensource.altera.com wrote: > > From: Alan Tull <atull@opensource.altera.com> > > > > Use WFI when putting CPU1 to sleep. Don't hold CPU1 in reset > > since that results in increased power consumption. > > > > Reset CPU1 briefly during CPU1 bootup. > > > > This has been tested for hotplug and suspend/resume and results > > in no increased power consumption. > > > > Signed-off-by: Alan Tull <atull@opensource.altera.com> > > It is nice to Cc people who commented ont the patch before. HI Pavel, OK, adding you and others who commented. > > > if (cpu1start_addr) { > > + /* This will put CPU #1 into reset. */ > > + __raw_writel(RSTMGR_MPUMODRST_CPU1, > > + rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); > > + > > I thought conclusion was to use writel (not __raw variant) here? Yes it was. Fixed in v3, soon. Alan > > -- > (english) http://www.livejournal.com/~pavelmachek > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] socfpga: support suspend to ram 2014-10-01 19:38 [PATCH v2 0/2] socfpga: fix hotplug/add suspend to ram atull at opensource.altera.com 2014-10-01 19:38 ` [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi atull at opensource.altera.com @ 2014-10-01 19:38 ` atull at opensource.altera.com 2014-10-02 21:16 ` atull 2014-10-07 11:17 ` Pavel Machek 1 sibling, 2 replies; 8+ messages in thread From: atull at opensource.altera.com @ 2014-10-01 19:38 UTC (permalink / raw) To: linux-arm-kernel From: Alan Tull <atull@opensource.altera.com> Add code that requests that the sdr controller go into self-refresh mode. This code is run from ocram. This patch assumes that u-boot has already configured sdr: sdr.ctrlcfg.lowpwreq.selfrfshmask = 3 sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8 sdr.ctrlcfg.dramtiming4.selfrfshexit = 512 How to suspend to ram: $ echo enabled > \ /sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup $ echo -n mem > /sys/power/state Signed-off-by: Alan Tull <atull@opensource.altera.com> v2: use Generic on-chip SRAM driver to allocate ocram rm fncpy_align since generic allocator handles alignment check __arm_ioremap_exec return code check for NULL pointers add a comment regarding sdram controller configuration --- arch/arm/mach-socfpga/Kconfig | 1 + arch/arm/mach-socfpga/Makefile | 1 + arch/arm/mach-socfpga/core.h | 6 +- arch/arm/mach-socfpga/platsmp.c | 4 +- arch/arm/mach-socfpga/pm.c | 147 +++++++++++++++++++++++++++++++ arch/arm/mach-socfpga/self-refresh.S | 157 ++++++++++++++++++++++++++++++++++ arch/arm/mach-socfpga/socfpga.c | 10 +++ 7 files changed, 323 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-socfpga/pm.c create mode 100644 arch/arm/mach-socfpga/self-refresh.S diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index b5f8d75..81449da 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -4,6 +4,7 @@ config ARCH_SOCFPGA select ARM_GIC select CACHE_L2X0 select DW_APB_TIMER_OF + select GENERIC_ALLOCATOR select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index 6dd7a93..0591927 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -4,3 +4,4 @@ obj-y := socfpga.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o +obj-$(CONFIG_SUSPEND) += pm.o self-refresh.o diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 953a9c0..211adfd 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -21,7 +21,7 @@ #define __MACH_CORE_H #define SOCFPGA_RSTMGR_CTRL 0x04 -#define SOCFPGA_RSTMGR_MODMPURST 0x10 +#define SOCFPGA_RSTMGR_MPUMODRST 0x10 #define SOCFPGA_RSTMGR_MODPERRST 0x14 #define SOCFPGA_RSTMGR_BRGMODRST 0x1c @@ -39,6 +39,7 @@ extern void socfpga_sysmgr_init(void); extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; +extern void __iomem *sdr_ctl_base_addr; extern struct smp_operations socfpga_smp_ops; extern char secondary_trampoline, secondary_trampoline_end; @@ -47,4 +48,7 @@ extern unsigned long cpu1start_addr; #define SOCFPGA_SCU_VIRT_BASE 0xfffec000 +u32 socfpga_sdram_self_refresh(u32 sdr_base, u32 scu_base); +extern unsigned int socfpga_sdram_self_refresh_sz; + #endif diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 97907dd..4093852 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -36,7 +36,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) if (cpu1start_addr) { /* This will put CPU #1 into reset. */ __raw_writel(RSTMGR_MPUMODRST_CPU1, - rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); + rst_manager_base_addr + SOCFPGA_RSTMGR_MPUMODRST); memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); @@ -49,7 +49,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) /* This will release CPU #1 out of reset. */ __raw_writel(0, - rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); + rst_manager_base_addr + SOCFPGA_RSTMGR_MPUMODRST); } return 0; diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c new file mode 100644 index 0000000..912aab8 --- /dev/null +++ b/arch/arm/mach-socfpga/pm.c @@ -0,0 +1,147 @@ +/* + * arch/arm/mach-socfpga/pm.c + * + * Copyright (C) 2014 Altera Corporation. All rights reserved. + * + * with code from pm-imx6.c + * Copyright 2011-2014 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/bitops.h> +#include <linux/genalloc.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/suspend.h> +#include <asm/suspend.h> +#include <asm/fncpy.h> +#include "core.h" + +/* Pointer to function copied to ocram */ +static u32 (*socfpga_sdram_self_refresh_in_ocram)(u32 sdr_base, u32 scu_base); + +static int socfpga_setup_ocram_self_refresh(void) +{ + struct platform_device *pdev; + phys_addr_t ocram_pbase; + struct device_node *np; + struct gen_pool *ocram_pool; + unsigned long ocram_base; + void __iomem *suspend_ocram_base; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, "mmio-sram"); + if (!np) { + pr_err("%s: Unable to find mmio-sram in dtb\n", __func__); + return 0; + } + + pdev = of_find_device_by_node(np); + if (!pdev) { + pr_warn("%s: failed to find ocram device!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_pool = dev_get_gen_pool(&pdev->dev); + if (!ocram_pool) { + pr_warn("%s: ocram pool unavailable!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz); + if (!ocram_base) { + pr_warn("%s: unable to alloc ocram!\n", __func__); + ret = -ENOMEM; + goto put_node; + } + + ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); + + suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, + socfpga_sdram_self_refresh_sz, + false); + if (!suspend_ocram_base) { + pr_warn("%s: __arm_ioremap_exec failed!\n", __func__); + ret = -ENOMEM; + goto put_node; + } + + /* Copy the code that puts DDR in self refresh to ocram */ + socfpga_sdram_self_refresh_in_ocram = + (void *)fncpy(suspend_ocram_base, + &socfpga_sdram_self_refresh, + socfpga_sdram_self_refresh_sz); + + WARN(!socfpga_sdram_self_refresh_in_ocram, + "could not copy function to ocram"); + if (!socfpga_sdram_self_refresh_in_ocram) + ret = -EFAULT; + +put_node: + of_node_put(np); + + return ret; +} + +static int socfpga_pm_suspend(unsigned long arg) +{ + u32 ret; + + if (!sdr_ctl_base_addr || !socfpga_scu_base_addr) + return -EFAULT; + + ret = socfpga_sdram_self_refresh_in_ocram( + (u32)sdr_ctl_base_addr, (u32)socfpga_scu_base_addr); + + pr_debug("%s self-refresh loops request=%d exit=%d\n", __func__, + ret & 0xffff, (ret >> 16) & 0xffff); + + return 0; +} + +static int socfpga_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + outer_disable(); + cpu_suspend(0, socfpga_pm_suspend); + outer_resume(); + break; + default: + return -EINVAL; + } + return 0; +} + +static const struct platform_suspend_ops socfpga_pm_ops = { + .valid = suspend_valid_only_mem, + .enter = socfpga_pm_enter, +}; + +static int __init socfpga_pm_init(void) +{ + if (socfpga_setup_ocram_self_refresh()) + return -EFAULT; + + suspend_set_ops(&socfpga_pm_ops); + pr_info("SoCFPGA initialized for DDR self-refresh during suspend.\n"); + + return 0; +} +arch_initcall(socfpga_pm_init); diff --git a/arch/arm/mach-socfpga/self-refresh.S b/arch/arm/mach-socfpga/self-refresh.S new file mode 100644 index 0000000..93962d4 --- /dev/null +++ b/arch/arm/mach-socfpga/self-refresh.S @@ -0,0 +1,157 @@ +/* + * Copyright (C) 2014 Altera Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +#define SOCFPGA_SCU_CTRL_OFFS 0 +#define SCU_STANDBY_ENA 0x20 +#define MAX_LOOP_COUNT 1000 + +/* Register offset */ +#define SDR_CTRLGRP_LOWPWREQ_ADDR 0x54 +#define SDR_CTRLGRP_LOWPWRACK_ADDR 0x58 + +/* Bitfield positions */ +#define SELFRSHREQ_POS 3 +#define SELFRSHREQ_MASK 0x8 + +#define SELFRFSHACK_POS 1 +#define SELFRFSHACK_MASK 0x2 + + /* + * This code assumes that the bootloader has already + * properly configured the sdram controller: + * + * sdr.ctrlcfg.lowpwreq.selfrfshmask = 3 + * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8 + * sdr.ctrlcfg.dramtiming4.selfrfshexit = 512 + */ + + .arch armv7-a + .text + .align 3 + + /* + * socfpga_sdram_self_refresh + * + * r0 : sdr_ctl_base_addr + * r1 : socfpga_scu_base_addr + * r2 : temp storage of register values + * r3 : loop counter + * r4 : temp storage of return value + * + * return value: lower 16 bits: loop count going into self refresh + * upper 16 bits: loop count exiting self refresh + */ +ENTRY(socfpga_sdram_self_refresh) + stmfd sp!, {r4} + + /* + * Enable SCU (snoop) standby mode. + * + * From the ARM Cortex-A9 MPCore Technical Reference Manual: + * "When set, SCU CLK is turned off when all processors are in WFI + * mode, there is no pending request on the ACP (if implemented), and + * there is no remaining activity in the SCU." + */ + ldr r2, [r1, #SOCFPGA_SCU_CTRL_OFFS] + orr r2, r2, #SCU_STANDBY_ENA + str r2, [r1, #SOCFPGA_SCU_CTRL_OFFS] + + /* Enable dynamic clock gating in the Power Control Register. */ + mrc p15, 0, r2, c15, c0, 0 + orr r2, r2, #1 + mcr p15, 0, r2, c15, c0, 0 + + /* Enable self refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 1 */ + ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] + orr r2, r2, #SELFRSHREQ_MASK + str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] + + /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 1 or hit max loops */ + mov r3, #0 +while_ack_0: + ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR] + and r2, r2, #SELFRFSHACK_MASK + cmp r2, #SELFRFSHACK_MASK + beq ack_1 + + add r3, #1 + cmp r3, #MAX_LOOP_COUNT + bne while_ack_0 + +ack_1: + mov r4, r3 + + /* + * Execute an ISB instruction to ensure that all of the + * CP15 register changes have been committed. + */ + isb + + /* + * Execute a barrier instruction to ensure that all cache, + * TLB and branch predictor maintenance operations issued + * by any CPU in the cluster have completed. + */ + dsb + dmb + + wfi + + /* Disable self-refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 0 */ + ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] + bic r2, r2, #SELFRSHREQ_MASK + str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] + + /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 0 or hit max loops */ + mov r3, #0 +while_ack_1: + ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR] + and r2, r2, #SELFRFSHACK_MASK + cmp r2, #SELFRFSHACK_MASK + bne ack_0 + + add r3, #1 + cmp r3, #MAX_LOOP_COUNT + bne while_ack_1 + +ack_0: + /* + * Prepare return value: + * Shift loop count for exiting self refresh into upper 16 bits. + * Leave loop count for requesting self refresh in lower 16 bits. + */ + mov r3, r3, lsl #16 + add r4, r4, r3 + + /* Disable dynamic clock gating in the Power Control Register. */ + mrc p15, 0, r2, c15, c0, 0 + bic r2, r2, #1 + mcr p15, 0, r2, c15, c0, 0 + + /* Disable SCU standby mode */ + ldr r2, [r1, #SOCFPGA_SCU_CTRL_OFFS] + bic r2, r2, #SCU_STANDBY_ENA + str r2, [r1, #SOCFPGA_SCU_CTRL_OFFS] + + mov r0, r4 @ return value + ldmfd sp!, {r4} + bx lr @ return + +ENDPROC(socfpga_sdram_self_refresh) +ENTRY(socfpga_sdram_self_refresh_sz) + .word . - socfpga_sdram_self_refresh diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index adbf383..34b4cc5 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -30,6 +30,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); void __iomem *sys_manager_base_addr; void __iomem *rst_manager_base_addr; unsigned long cpu1start_addr; +void __iomem *sdr_ctl_base_addr; static struct map_desc scu_io_desc __initdata = { .virtual = SOCFPGA_SCU_VIRT_BASE, @@ -77,6 +78,15 @@ void __init socfpga_sysmgr_init(void) np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); rst_manager_base_addr = of_iomap(np, 0); + + np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl"); + if (!np) { + pr_err("SOCFPGA: Unable to find sdr-ctl\n"); + return; + } + + sdr_ctl_base_addr = of_iomap(np, 0); + WARN_ON(!sdr_ctl_base_addr); } static void __init socfpga_init_irq(void) -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] socfpga: support suspend to ram 2014-10-01 19:38 ` [PATCH v2 2/2] socfpga: support suspend to ram atull at opensource.altera.com @ 2014-10-02 21:16 ` atull 2014-10-07 11:17 ` Pavel Machek 1 sibling, 0 replies; 8+ messages in thread From: atull @ 2014-10-02 21:16 UTC (permalink / raw) To: linux-arm-kernel On Wed, 1 Oct 2014, atull at opensource.altera.com wrote: > From: Alan Tull <atull@opensource.altera.com> > > Add code that requests that the sdr controller go into > self-refresh mode. This code is run from ocram. > > This patch assumes that u-boot has already configured sdr: > sdr.ctrlcfg.lowpwreq.selfrfshmask = 3 > sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8 > sdr.ctrlcfg.dramtiming4.selfrfshexit = 512 > > How to suspend to ram: > $ echo enabled > \ > /sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup > > $ echo -n mem > /sys/power/state > > Signed-off-by: Alan Tull <atull@opensource.altera.com> > > v2: use Generic on-chip SRAM driver to allocate ocram > rm fncpy_align since generic allocator handles alignment > check __arm_ioremap_exec return code > check for NULL pointers > add a comment regarding sdram controller configuration > --- > arch/arm/mach-socfpga/Kconfig | 1 + > arch/arm/mach-socfpga/Makefile | 1 + > arch/arm/mach-socfpga/core.h | 6 +- > arch/arm/mach-socfpga/platsmp.c | 4 +- > arch/arm/mach-socfpga/pm.c | 147 +++++++++++++++++++++++++++++++ > arch/arm/mach-socfpga/self-refresh.S | 157 ++++++++++++++++++++++++++++++++++ > arch/arm/mach-socfpga/socfpga.c | 10 +++ > 7 files changed, 323 insertions(+), 3 deletions(-) > create mode 100644 arch/arm/mach-socfpga/pm.c > create mode 100644 arch/arm/mach-socfpga/self-refresh.S > > diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig > index b5f8d75..81449da 100644 > --- a/arch/arm/mach-socfpga/Kconfig > +++ b/arch/arm/mach-socfpga/Kconfig > @@ -4,6 +4,7 @@ config ARCH_SOCFPGA > select ARM_GIC > select CACHE_L2X0 > select DW_APB_TIMER_OF > + select GENERIC_ALLOCATOR > select GPIO_PL061 if GPIOLIB > select HAVE_ARM_SCU > select HAVE_ARM_TWD if SMP > diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile > index 6dd7a93..0591927 100644 > --- a/arch/arm/mach-socfpga/Makefile > +++ b/arch/arm/mach-socfpga/Makefile > @@ -4,3 +4,4 @@ > > obj-y := socfpga.o > obj-$(CONFIG_SMP) += headsmp.o platsmp.o > +obj-$(CONFIG_SUSPEND) += pm.o self-refresh.o > diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h > index 953a9c0..211adfd 100644 > --- a/arch/arm/mach-socfpga/core.h > +++ b/arch/arm/mach-socfpga/core.h > @@ -21,7 +21,7 @@ > #define __MACH_CORE_H > > #define SOCFPGA_RSTMGR_CTRL 0x04 > -#define SOCFPGA_RSTMGR_MODMPURST 0x10 > +#define SOCFPGA_RSTMGR_MPUMODRST 0x10 Obvious error here - I ment to change the name of the #define where I added it in patch 1, not add it in patch 1 and change it in patch 2. Alan > #define SOCFPGA_RSTMGR_MODPERRST 0x14 > #define SOCFPGA_RSTMGR_BRGMODRST 0x1c > > @@ -39,6 +39,7 @@ extern void socfpga_sysmgr_init(void); > > extern void __iomem *sys_manager_base_addr; > extern void __iomem *rst_manager_base_addr; > +extern void __iomem *sdr_ctl_base_addr; > > extern struct smp_operations socfpga_smp_ops; > extern char secondary_trampoline, secondary_trampoline_end; > @@ -47,4 +48,7 @@ extern unsigned long cpu1start_addr; > > #define SOCFPGA_SCU_VIRT_BASE 0xfffec000 > > +u32 socfpga_sdram_self_refresh(u32 sdr_base, u32 scu_base); > +extern unsigned int socfpga_sdram_self_refresh_sz; > + > #endif > diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c > index 97907dd..4093852 100644 > --- a/arch/arm/mach-socfpga/platsmp.c > +++ b/arch/arm/mach-socfpga/platsmp.c > @@ -36,7 +36,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) > if (cpu1start_addr) { > /* This will put CPU #1 into reset. */ > __raw_writel(RSTMGR_MPUMODRST_CPU1, > - rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); > + rst_manager_base_addr + SOCFPGA_RSTMGR_MPUMODRST); > > memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); > > @@ -49,7 +49,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) > > /* This will release CPU #1 out of reset. */ > __raw_writel(0, > - rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST); > + rst_manager_base_addr + SOCFPGA_RSTMGR_MPUMODRST); > } > > return 0; > diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c > new file mode 100644 > index 0000000..912aab8 > --- /dev/null > +++ b/arch/arm/mach-socfpga/pm.c > @@ -0,0 +1,147 @@ > +/* > + * arch/arm/mach-socfpga/pm.c > + * > + * Copyright (C) 2014 Altera Corporation. All rights reserved. > + * > + * with code from pm-imx6.c > + * Copyright 2011-2014 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/bitops.h> > +#include <linux/genalloc.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/of_platform.h> > +#include <linux/suspend.h> > +#include <asm/suspend.h> > +#include <asm/fncpy.h> > +#include "core.h" > + > +/* Pointer to function copied to ocram */ > +static u32 (*socfpga_sdram_self_refresh_in_ocram)(u32 sdr_base, u32 scu_base); > + > +static int socfpga_setup_ocram_self_refresh(void) > +{ > + struct platform_device *pdev; > + phys_addr_t ocram_pbase; > + struct device_node *np; > + struct gen_pool *ocram_pool; > + unsigned long ocram_base; > + void __iomem *suspend_ocram_base; > + int ret = 0; > + > + np = of_find_compatible_node(NULL, NULL, "mmio-sram"); > + if (!np) { > + pr_err("%s: Unable to find mmio-sram in dtb\n", __func__); > + return 0; > + } > + > + pdev = of_find_device_by_node(np); > + if (!pdev) { > + pr_warn("%s: failed to find ocram device!\n", __func__); > + ret = -ENODEV; > + goto put_node; > + } > + > + ocram_pool = dev_get_gen_pool(&pdev->dev); > + if (!ocram_pool) { > + pr_warn("%s: ocram pool unavailable!\n", __func__); > + ret = -ENODEV; > + goto put_node; > + } > + > + ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz); > + if (!ocram_base) { > + pr_warn("%s: unable to alloc ocram!\n", __func__); > + ret = -ENOMEM; > + goto put_node; > + } > + > + ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); > + > + suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, > + socfpga_sdram_self_refresh_sz, > + false); > + if (!suspend_ocram_base) { > + pr_warn("%s: __arm_ioremap_exec failed!\n", __func__); > + ret = -ENOMEM; > + goto put_node; > + } > + > + /* Copy the code that puts DDR in self refresh to ocram */ > + socfpga_sdram_self_refresh_in_ocram = > + (void *)fncpy(suspend_ocram_base, > + &socfpga_sdram_self_refresh, > + socfpga_sdram_self_refresh_sz); > + > + WARN(!socfpga_sdram_self_refresh_in_ocram, > + "could not copy function to ocram"); > + if (!socfpga_sdram_self_refresh_in_ocram) > + ret = -EFAULT; > + > +put_node: > + of_node_put(np); > + > + return ret; > +} > + > +static int socfpga_pm_suspend(unsigned long arg) > +{ > + u32 ret; > + > + if (!sdr_ctl_base_addr || !socfpga_scu_base_addr) > + return -EFAULT; > + > + ret = socfpga_sdram_self_refresh_in_ocram( > + (u32)sdr_ctl_base_addr, (u32)socfpga_scu_base_addr); > + > + pr_debug("%s self-refresh loops request=%d exit=%d\n", __func__, > + ret & 0xffff, (ret >> 16) & 0xffff); > + > + return 0; > +} > + > +static int socfpga_pm_enter(suspend_state_t state) > +{ > + switch (state) { > + case PM_SUSPEND_STANDBY: > + case PM_SUSPEND_MEM: > + outer_disable(); > + cpu_suspend(0, socfpga_pm_suspend); > + outer_resume(); > + break; > + default: > + return -EINVAL; > + } > + return 0; > +} > + > +static const struct platform_suspend_ops socfpga_pm_ops = { > + .valid = suspend_valid_only_mem, > + .enter = socfpga_pm_enter, > +}; > + > +static int __init socfpga_pm_init(void) > +{ > + if (socfpga_setup_ocram_self_refresh()) > + return -EFAULT; > + > + suspend_set_ops(&socfpga_pm_ops); > + pr_info("SoCFPGA initialized for DDR self-refresh during suspend.\n"); > + > + return 0; > +} > +arch_initcall(socfpga_pm_init); > diff --git a/arch/arm/mach-socfpga/self-refresh.S b/arch/arm/mach-socfpga/self-refresh.S > new file mode 100644 > index 0000000..93962d4 > --- /dev/null > +++ b/arch/arm/mach-socfpga/self-refresh.S > @@ -0,0 +1,157 @@ > +/* > + * Copyright (C) 2014 Altera Corporation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > +#include <linux/linkage.h> > +#include <asm/assembler.h> > + > +#define SOCFPGA_SCU_CTRL_OFFS 0 > +#define SCU_STANDBY_ENA 0x20 > +#define MAX_LOOP_COUNT 1000 > + > +/* Register offset */ > +#define SDR_CTRLGRP_LOWPWREQ_ADDR 0x54 > +#define SDR_CTRLGRP_LOWPWRACK_ADDR 0x58 > + > +/* Bitfield positions */ > +#define SELFRSHREQ_POS 3 > +#define SELFRSHREQ_MASK 0x8 > + > +#define SELFRFSHACK_POS 1 > +#define SELFRFSHACK_MASK 0x2 > + > + /* > + * This code assumes that the bootloader has already > + * properly configured the sdram controller: > + * > + * sdr.ctrlcfg.lowpwreq.selfrfshmask = 3 > + * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8 > + * sdr.ctrlcfg.dramtiming4.selfrfshexit = 512 > + */ > + > + .arch armv7-a > + .text > + .align 3 > + > + /* > + * socfpga_sdram_self_refresh > + * > + * r0 : sdr_ctl_base_addr > + * r1 : socfpga_scu_base_addr > + * r2 : temp storage of register values > + * r3 : loop counter > + * r4 : temp storage of return value > + * > + * return value: lower 16 bits: loop count going into self refresh > + * upper 16 bits: loop count exiting self refresh > + */ > +ENTRY(socfpga_sdram_self_refresh) > + stmfd sp!, {r4} > + > + /* > + * Enable SCU (snoop) standby mode. > + * > + * From the ARM Cortex-A9 MPCore Technical Reference Manual: > + * "When set, SCU CLK is turned off when all processors are in WFI > + * mode, there is no pending request on the ACP (if implemented), and > + * there is no remaining activity in the SCU." > + */ > + ldr r2, [r1, #SOCFPGA_SCU_CTRL_OFFS] > + orr r2, r2, #SCU_STANDBY_ENA > + str r2, [r1, #SOCFPGA_SCU_CTRL_OFFS] > + > + /* Enable dynamic clock gating in the Power Control Register. */ > + mrc p15, 0, r2, c15, c0, 0 > + orr r2, r2, #1 > + mcr p15, 0, r2, c15, c0, 0 > + > + /* Enable self refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 1 */ > + ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] > + orr r2, r2, #SELFRSHREQ_MASK > + str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] > + > + /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 1 or hit max loops */ > + mov r3, #0 > +while_ack_0: > + ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR] > + and r2, r2, #SELFRFSHACK_MASK > + cmp r2, #SELFRFSHACK_MASK > + beq ack_1 > + > + add r3, #1 > + cmp r3, #MAX_LOOP_COUNT > + bne while_ack_0 > + > +ack_1: > + mov r4, r3 > + > + /* > + * Execute an ISB instruction to ensure that all of the > + * CP15 register changes have been committed. > + */ > + isb > + > + /* > + * Execute a barrier instruction to ensure that all cache, > + * TLB and branch predictor maintenance operations issued > + * by any CPU in the cluster have completed. > + */ > + dsb > + dmb > + > + wfi > + > + /* Disable self-refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 0 */ > + ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] > + bic r2, r2, #SELFRSHREQ_MASK > + str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] > + > + /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 0 or hit max loops */ > + mov r3, #0 > +while_ack_1: > + ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR] > + and r2, r2, #SELFRFSHACK_MASK > + cmp r2, #SELFRFSHACK_MASK > + bne ack_0 > + > + add r3, #1 > + cmp r3, #MAX_LOOP_COUNT > + bne while_ack_1 > + > +ack_0: > + /* > + * Prepare return value: > + * Shift loop count for exiting self refresh into upper 16 bits. > + * Leave loop count for requesting self refresh in lower 16 bits. > + */ > + mov r3, r3, lsl #16 > + add r4, r4, r3 > + > + /* Disable dynamic clock gating in the Power Control Register. */ > + mrc p15, 0, r2, c15, c0, 0 > + bic r2, r2, #1 > + mcr p15, 0, r2, c15, c0, 0 > + > + /* Disable SCU standby mode */ > + ldr r2, [r1, #SOCFPGA_SCU_CTRL_OFFS] > + bic r2, r2, #SCU_STANDBY_ENA > + str r2, [r1, #SOCFPGA_SCU_CTRL_OFFS] > + > + mov r0, r4 @ return value > + ldmfd sp!, {r4} > + bx lr @ return > + > +ENDPROC(socfpga_sdram_self_refresh) > +ENTRY(socfpga_sdram_self_refresh_sz) > + .word . - socfpga_sdram_self_refresh > diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c > index adbf383..34b4cc5 100644 > --- a/arch/arm/mach-socfpga/socfpga.c > +++ b/arch/arm/mach-socfpga/socfpga.c > @@ -30,6 +30,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); > void __iomem *sys_manager_base_addr; > void __iomem *rst_manager_base_addr; > unsigned long cpu1start_addr; > +void __iomem *sdr_ctl_base_addr; > > static struct map_desc scu_io_desc __initdata = { > .virtual = SOCFPGA_SCU_VIRT_BASE, > @@ -77,6 +78,15 @@ void __init socfpga_sysmgr_init(void) > > np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); > rst_manager_base_addr = of_iomap(np, 0); > + > + np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl"); > + if (!np) { > + pr_err("SOCFPGA: Unable to find sdr-ctl\n"); > + return; > + } > + > + sdr_ctl_base_addr = of_iomap(np, 0); > + WARN_ON(!sdr_ctl_base_addr); > } > > static void __init socfpga_init_irq(void) > -- > 1.7.9.5 > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] socfpga: support suspend to ram 2014-10-01 19:38 ` [PATCH v2 2/2] socfpga: support suspend to ram atull at opensource.altera.com 2014-10-02 21:16 ` atull @ 2014-10-07 11:17 ` Pavel Machek 2014-10-07 14:17 ` atull 1 sibling, 1 reply; 8+ messages in thread From: Pavel Machek @ 2014-10-07 11:17 UTC (permalink / raw) To: linux-arm-kernel Hi! > From: Alan Tull <atull@opensource.altera.com> > > Add code that requests that the sdr controller go into > self-refresh mode. This code is run from ocram. > > This patch assumes that u-boot has already configured sdr: > sdr.ctrlcfg.lowpwreq.selfrfshmask = 3 > sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8 > sdr.ctrlcfg.dramtiming4.selfrfshexit = 512 > > How to suspend to ram: > $ echo enabled > \ > /sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup > > $ echo -n mem > /sys/power/state > > Signed-off-by: Alan Tull <atull@opensource.altera.com> > +static int __init socfpga_pm_init(void) > +{ > + if (socfpga_setup_ocram_self_refresh()) > + return -EFAULT; It would be nice to propagate the error result here. Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2 2/2] socfpga: support suspend to ram 2014-10-07 11:17 ` Pavel Machek @ 2014-10-07 14:17 ` atull 0 siblings, 0 replies; 8+ messages in thread From: atull @ 2014-10-07 14:17 UTC (permalink / raw) To: linux-arm-kernel On Tue, 7 Oct 2014, Pavel Machek wrote: > Hi! > > > From: Alan Tull <atull@opensource.altera.com> > > > > Add code that requests that the sdr controller go into > > self-refresh mode. This code is run from ocram. > > > > This patch assumes that u-boot has already configured sdr: > > sdr.ctrlcfg.lowpwreq.selfrfshmask = 3 > > sdr.ctrlcfg.lowpwrtiming.clkdisablecycles = 8 > > sdr.ctrlcfg.dramtiming4.selfrfshexit = 512 > > > > How to suspend to ram: > > $ echo enabled > \ > > /sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup > > > > $ echo -n mem > /sys/power/state > > > > Signed-off-by: Alan Tull <atull@opensource.altera.com> > > > +static int __init socfpga_pm_init(void) > > +{ > > + if (socfpga_setup_ocram_self_refresh()) > > + return -EFAULT; > > It would be nice to propagate the error result here. Hi Pavel, Yes, good catch. Thanks, Alan > > Best regards, > Pavel > -- > (english) http://www.livejournal.com/~pavelmachek > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-10-07 14:19 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-10-01 19:38 [PATCH v2 0/2] socfpga: fix hotplug/add suspend to ram atull at opensource.altera.com 2014-10-01 19:38 ` [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi atull at opensource.altera.com 2014-10-07 11:10 ` Pavel Machek 2014-10-07 14:19 ` atull 2014-10-01 19:38 ` [PATCH v2 2/2] socfpga: support suspend to ram atull at opensource.altera.com 2014-10-02 21:16 ` atull 2014-10-07 11:17 ` Pavel Machek 2014-10-07 14:17 ` atull
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).