From mboxrd@z Thu Jan 1 00:00:00 1970 From: andriy.shevchenko@linux.intel.com (Andy Shevchenko) Date: Fri, 10 Oct 2014 17:10:47 +0300 Subject: [PATCH 2/2 v3] SPI: spi-pxa2xx: SPI support for Intel Quark X1000 In-Reply-To: <4656BEB6164FC34F8171C6538F1A595B2E998BCE@SHSMSX101.ccr.corp.intel.com> References: <1412783423-9408-1-git-send-email-alvin.chen@intel.com> <1412783423-9408-3-git-send-email-alvin.chen@intel.com> <5436ECC6.9080704@nexus-software.ie> <4656BEB6164FC34F8171C6538F1A595B2E998BCE@SHSMSX101.ccr.corp.intel.com> Message-ID: <1412950247.7701.15.camel@linux.intel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 2014-10-10 at 00:46 +0000, Chen, Alvin wrote: > > Doesn't apply. > > > > Applying: SPI: spi-pxa2xx: SPI support for Intel Quark X1000 > > error: patch failed: drivers/spi/spi-pxa2xx-pci.c:19 > > error: drivers/spi/spi-pxa2xx-pci.c: patch does not apply Patch failed at 0002 SPI: > > spi-pxa2xx: SPI support for Intel Quark X1000 > > > It is based on the slave-dma tree (git.infraded.org) for-linus branch, which will be reapplied on top of v3.19-rc1. > More information can be got from Andy. Actually if I understand correctly your series requires only one patch to be applied from topic/spi-pxa2xx branch by Chiau Ee, though you have to rearrange the code in the spi-pxa2xx-pci.c to not be closer to Braswell stuff. But again, it's only my guessing, you may try to rebase it on top of topic branch mentioned above. -- Andy Shevchenko Intel Finland Oy