From: linus.walleij@linaro.org (Linus Walleij)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/8] ARM: realview: move DT GIC to FPGA node
Date: Tue, 14 Oct 2014 15:04:08 +0200 [thread overview]
Message-ID: <1413291855-499-1-git-send-email-linus.walleij@linaro.org> (raw)
This creates a node in the device tree to hold the FPGA devices
as a "simple-bus" and moves the GIC found on the FPGA to this
node, so it reflects the actual topology of the system.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/arm-realview-pb1176.dts | 32 +++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 3135939cd13f..f780adde2332 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -153,18 +153,6 @@
<0x10120000 0x100>;
};
- /* This GIC on the board is cascaded off the DevChip GIC */
- intc_pb1176: interrupt-controller at 10040000 {
- compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- interrupt-controller;
- reg = <0x10041000 0x1000>,
- <0x10040000 0x100>;
- interrupt-parent = <&intc_dc1176>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
- };
-
L2: l2-cache {
compatible = "arm,l220-cache";
reg = <0x10110000 0x1000>;
@@ -244,4 +232,24 @@
clock-names = "uartclk", "apb_pclk";
};
};
+
+ /* These peripherals are inside the FPGA rather than the DevChip */
+ fpga {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ /* This GIC on the board is cascaded off the DevChip GIC */
+ intc_fpga1176: interrupt-controller at 10040000 {
+ compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10041000 0x1000>,
+ <0x10040000 0x100>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
--
1.9.3
next reply other threads:[~2014-10-14 13:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-14 13:04 Linus Walleij [this message]
2014-10-14 13:04 ` [PATCH 2/8] ARM: realview: add PL061 GPIO to the PB1176 DTS Linus Walleij
2014-10-14 13:04 ` [PATCH 3/8] ARM: realview: add charlcd to PB1176 device tree Linus Walleij
2014-10-14 13:04 ` [PATCH 4/8] ARM: realview: add RTC clocks to " Linus Walleij
2014-10-14 13:04 ` [PATCH 5/8] ARM: realview: add PL022 SSP/SPI block to PB1176 DTS Linus Walleij
2014-10-14 13:04 ` [PATCH 6/8] ARM: realview: add FPGA UART4 " Linus Walleij
2014-10-14 13:04 ` [PATCH 7/8] ARM: realview: add KMIs to the " Linus Walleij
2014-10-14 13:04 ` [PATCH 8/8] ARM: realview: add MMCI " Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413291855-499-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).