From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC 3/3] ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes
Date: Tue, 21 Oct 2014 14:49:27 +0800 [thread overview]
Message-ID: <1413874167-6479-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1413874167-6479-1-git-send-email-wens@csie.org>
This adds the PRCM clocks and reset controls to the A80 dtsi.
The list of apbs clock gates is incomplete. Tests show that bits 0~20
are mutable. We will need documents from Allwinner to complete the
support.
Also update clock and reset phandles for r_uart.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 47 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 2a1c10d..1f3da34 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -418,13 +418,58 @@
interrupts = <0 36 4>;
};
+ prcm at 08001400 {
+ compatible = "allwinner,sun9i-a80-prcm";
+ reg = <0x08001400 0x200>;
+
+ cpus_clk: cpus_clk {
+ compatible = "allwinner,sun6i-a31-ar100-clk";
+ #clock-cells = <0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll4>;
+ clock-output-names = "cpus";
+ };
+
+ ahbs: ahbs_clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&cpus_clk>;
+ clock-output-names = "ahbs";
+ };
+
+ apbs: apbs_clk {
+ compatible = "allwinner,sun8i-a23-apb0-clk";
+ #clock-cells = <0>;
+ clocks = <&ahbs>;
+ clock-output-names = "apbs";
+ };
+
+ apbs_gates: apbs_gates_clk {
+ compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+ #clock-cells = <1>;
+ clocks = <&apbs>;
+ clock-output-names = "apbs_pio", "apbs_ir",
+ "apbs_timer", "apbs_rsb",
+ "apbs_uart", "apbs_1wire",
+ "apbs_i2c", "apbs_i2s0",
+ "apbs_i2s1";
+ };
+
+ apbs_rst: apbs_rst {
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ #reset-cells = <1>;
+ };
+ };
+
r_uart: serial at 08002800 {
compatible = "snps,dw-apb-uart";
reg = <0x08002800 0x400>;
interrupts = <0 38 4>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&osc24M>;
+ clocks = <&apbs_gates 4>;
+ resets = <&apbs_rst 4>;
status = "disabled";
};
};
--
2.1.1
next prev parent reply other threads:[~2014-10-21 6:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 6:49 [RFC 0/3] ARM: sun9i: Add PRCM clocks and reset controls support Chen-Yu Tsai
2014-10-21 6:49 ` [RFC 1/3] clk: sunxi: sun6i-apb0: Add support for sun9i A80 apbs gates Chen-Yu Tsai
2014-10-21 6:49 ` [RFC 2/3] mfd: sun6i-prcm: Add support for PRCM found on Allwinner A80 SoC Chen-Yu Tsai
2014-10-21 6:49 ` Chen-Yu Tsai [this message]
2014-10-28 21:10 ` [RFC 0/3] ARM: sun9i: Add PRCM clocks and reset controls support Maxime Ripard
2014-10-29 2:07 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413874167-6479-4-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox