From: dinguyen@opensource.altera.com (dinguyen at opensource.altera.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node
Date: Tue, 21 Oct 2014 11:15:11 -0500 [thread overview]
Message-ID: <1413908111-28165-3-git-send-email-dinguyen@opensource.altera.com> (raw)
In-Reply-To: <1413908111-28165-1-git-send-email-dinguyen@opensource.altera.com>
From: Dinh Nguyen <dinguyen@opensource.altera.com>
Without the 3.3V regulator node, the SDMMC driver will give these warnings:
dw_mmc ff704000.dwmmc0: No vmmc regulator found
dw_mmc ff704000.dwmmc0: No vqmmc regulator found
This patch adds the regulator node, and points the SD/MMC to the regulator.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
---
v3: Rename nodes to have schematic-name_regulator and remove "boot-on" and
"always-on"
v2: Move the regulator nodes to their respective board dts file and
correctly rename them to match the schematic
---
arch/arm/boot/dts/socfpga_arria5.dtsi | 2 +-
arch/arm/boot/dts/socfpga_arria5_socdk.dts | 12 ++++++++++++
arch/arm/boot/dts/socfpga_cyclone5_socdk.dts | 9 +++++++++
arch/arm/boot/dts/socfpga_cyclone5_sockit.dts | 12 ++++++++++++
4 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 03e8268..1907cc6 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -29,7 +29,7 @@
};
};
- dwmmc0 at ff704000 {
+ mmc0: dwmmc0 at ff704000 {
num-slots = <1>;
broken-cd;
bus-width = <4>;
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 27d551c..ccaf417 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -37,6 +37,13 @@
*/
ethernet0 = &gmac1;
};
+
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&gmac1 {
@@ -68,6 +75,11 @@
};
};
+&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+};
+
&usb1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 03a3745..f962135 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -43,6 +43,13 @@
status = "okay";
};
};
+
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&gmac1 {
@@ -76,6 +83,8 @@
&mmc0 {
cd-gpios = <&gpio1 18 0>;
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
};
&usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index d26f155..16ea6f5 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -37,6 +37,13 @@
*/
ethernet0 = &gmac1;
};
+
+ regulator_3_3v: vcc3p3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&gmac1 {
@@ -53,6 +60,11 @@
rxc-skew-ps = <2000>;
};
+&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+};
+
&usb1 {
status = "okay";
};
--
2.0.3
prev parent reply other threads:[~2014-10-21 16:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 16:15 [PATCHv3 0/2] ARM: dts: socfpga: fix booting with SD/MMC dinguyen at opensource.altera.com
2014-10-21 16:15 ` [PATCHv3 1/2] ARM: dts: socfpga: Fix SD card detect dinguyen at opensource.altera.com
2014-10-21 17:10 ` Steffen Trumtrar
2014-10-21 18:48 ` Dinh Nguyen
2014-10-22 15:45 ` Doug Anderson
2014-10-22 15:47 ` Dinh Nguyen
2014-10-21 16:15 ` dinguyen at opensource.altera.com [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413908111-28165-3-git-send-email-dinguyen@opensource.altera.com \
--to=dinguyen@opensource.altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).