From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Tue, 28 Oct 2014 17:50:39 +0800 Subject: [PATCH 2/6] ARM: dts: sun9i: Add i2c3 pinmux setting for A80 SoC In-Reply-To: <1414489843-2680-1-git-send-email-wens@csie.org> References: <1414489843-2680-1-git-send-email-wens@csie.org> Message-ID: <1414489843-2680-3-git-send-email-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org i2c3 has only one possible pinmux setting on the A80 SoC. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun9i-a80.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index b03d791..653bb4d 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -361,6 +361,13 @@ #size-cells = <0>; #gpio-cells = <3>; + i2c3_pins_a: i2c3 at 0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "i2c3"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0 at 0 { allwinner,pins = "PH12", "PH13"; allwinner,function = "uart0"; -- 2.1.1