From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/10] ARM: dts: Add smc91x GPMC configuration for 2430sdp
Date: Wed, 29 Oct 2014 17:29:01 -0700 [thread overview]
Message-ID: <1414628948-30702-4-git-send-email-tony@atomide.com> (raw)
In-Reply-To: <1414628948-30702-1-git-send-email-tony@atomide.com>
Let's use the bootloader values except for the partially configured
wait-pin that does not seem to work.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap2430-sdp.dts | 28 ++++++++++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
index 2c90d29..05eca2e 100644
--- a/arch/arm/boot/dts/omap2430-sdp.dts
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -43,7 +43,31 @@
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
reg = <5 0x300 0xf>;
bank-width = <2>;
- gpmc,mux-add-data;
- };
+ gpmc,sync-clk-ps = <0>;
+ gpmc,mux-add-data = <2>;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <7>;
+ gpmc,cs-rd-off-ns = <233>;
+ gpmc,cs-wr-off-ns = <233>;
+ gpmc,adv-on-ns = <22>;
+ gpmc,adv-rd-off-ns = <60>;
+ gpmc,adv-wr-off-ns = <60>;
+ gpmc,oe-on-ns = <67>;
+ gpmc,oe-off-ns = <210>;
+ gpmc,we-on-ns = <67>;
+ gpmc,we-off-ns = <210>;
+ gpmc,rd-cycle-ns = <233>;
+ gpmc,wr-cycle-ns = <233>;
+ gpmc,access-ns = <233>;
+ gpmc,page-burst-access-ns = <30>;
+ gpmc,bus-turnaround-ns = <30>;
+ gpmc,cycle2cycle-delay-ns = <30>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ };
};
--
2.1.1
next prev parent reply other threads:[~2014-10-30 0:29 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-30 0:28 [PATCH 00/10] omap gpmc and board clean-up for v3.19 merge window Tony Lindgren
2014-10-30 0:28 ` [PATCH 01/10] ARM: dts: Fix bootloader version dependencies by muxing n900 smc91x pins Tony Lindgren
2014-10-30 11:59 ` Roger Quadros
2014-10-30 15:49 ` Tony Lindgren
2014-11-03 9:30 ` Roger Quadros
2014-10-30 0:29 ` [PATCH 02/10] ARM: dts: Fix wrong GPMC size mappings for omaps Tony Lindgren
2014-10-30 12:05 ` Roger Quadros
2014-10-30 0:29 ` Tony Lindgren [this message]
2014-10-30 0:29 ` [PATCH 04/10] ARM: dts: Add GPMC timings for omap zoom serial port Tony Lindgren
2014-10-30 12:21 ` Roger Quadros
2014-10-30 0:29 ` [PATCH 05/10] ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select Tony Lindgren
2014-10-30 12:26 ` Roger Quadros
2014-10-30 0:29 ` [PATCH 06/10] ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file Tony Lindgren
2014-10-30 14:19 ` Roger Quadros
2014-10-30 14:45 ` Tony Lindgren
2014-10-30 15:04 ` Roger Quadros
2014-10-30 16:30 ` Tony Lindgren
2014-10-31 9:24 ` Roger Quadros
2014-11-04 13:40 ` Roger Quadros
2014-11-04 15:49 ` Tony Lindgren
2014-10-30 14:26 ` Roger Quadros
2014-10-30 0:29 ` [PATCH 07/10] ARM: OMAP2+: Require proper GPMC timings for devices Tony Lindgren
2014-10-30 14:27 ` Roger Quadros
2014-10-30 0:29 ` [PATCH 08/10] ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c Tony Lindgren
2014-10-30 14:28 ` Roger Quadros
2014-10-30 0:29 ` [PATCH 09/10] ARM: OMAP2+: Drop board file for ti8168evm Tony Lindgren
2014-10-30 0:29 ` [PATCH 10/10] ARM: omap2plus: Drop board file for 3430sdp Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414628948-30702-4-git-send-email-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).