From mboxrd@z Thu Jan 1 00:00:00 1970 From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth) Date: Thu, 30 Oct 2014 11:21:25 +0100 Subject: [PATCH v3 2/5] phy: berlin-sata: Add support for BG2 SATA PHY In-Reply-To: <1414664488-5911-1-git-send-email-sebastian.hesselbarth@gmail.com> References: <1413882477-27922-1-git-send-email-sebastian.hesselbarth@gmail.com> <1414664488-5911-1-git-send-email-sebastian.hesselbarth@gmail.com> Message-ID: <1414664488-5911-3-git-send-email-sebastian.hesselbarth@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Berlin BG2 also has a SATA PHY compatible with the current driver except different PHY_BASE. Add a new compatible to the driver reflecting the different PHY_BASE. Acked-by: Antoine T?nart Signed-off-by: Sebastian Hesselbarth --- Changelog: v1->v2: - none v2->v3: - Use of_device_is_compatible for different PHY_BASE (Suggested by Felipe Balbi) Cc: Kishon Vijay Abraham I Cc: "Antoine T?nart" Cc: devicetree at vger.kernel.org Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org --- drivers/phy/phy-berlin-sata.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c index cdb46d1203a4..873e7a890fee 100644 --- a/drivers/phy/phy-berlin-sata.c +++ b/drivers/phy/phy-berlin-sata.c @@ -30,6 +30,7 @@ #define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16) #define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19) +#define BG2_PHY_BASE 0x080 #define BG2Q_PHY_BASE 0x200 /* register 0x01 */ @@ -222,7 +223,10 @@ static int phy_berlin_sata_probe(struct platform_device *pdev) if (!priv->phys) return -ENOMEM; - priv->phy_base = BG2Q_PHY_BASE; + if (of_device_is_compatible(dev->of_node, "marvell,berlin2-sata-phy")) + priv->phy_base = BG2_PHY_BASE; + else + priv->phy_base = BG2Q_PHY_BASE; dev_set_drvdata(dev, priv); spin_lock_init(&priv->lock); @@ -271,6 +275,7 @@ static int phy_berlin_sata_probe(struct platform_device *pdev) } static const struct of_device_id phy_berlin_sata_of_match[] = { + { .compatible = "marvell,berlin2-sata-phy" }, { .compatible = "marvell,berlin2q-sata-phy" }, { }, }; -- 2.1.1