From mboxrd@z Thu Jan 1 00:00:00 1970 From: k.kozlowski@samsung.com (Krzysztof Kozlowski) Date: Thu, 30 Oct 2014 12:20:42 +0100 Subject: [PATCH v3 03/14] regulator: dt-bindings: max77802: Document of_compatible for regulator In-Reply-To: <1414668053-31370-1-git-send-email-k.kozlowski@samsung.com> References: <1414668053-31370-1-git-send-email-k.kozlowski@samsung.com> Message-ID: <1414668053-31370-4-git-send-email-k.kozlowski@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Document new required property for regulator driver: of_compatible. The property allows MFD core to bind the driver to node with regulators and this simplifies parsing regulators init data from DTS Signed-off-by: Krzysztof Kozlowski --- Documentation/devicetree/bindings/regulator/max77802.txt | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 5aeaffc0f1f0..fa545e7d3b0a 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -10,7 +10,11 @@ Following properties should be present in main device node of the MFD chip. Optional node: - regulators : The regulators of max77802 have to be instantiated - under subnode named "regulators" using the following format. + under subnode named "regulators". + Required property: + - compatible : Must be "maxim,max77802-pmic" + + Optional properties: For each regulator use following format: regulator-name { standard regulator constraints.... @@ -36,6 +40,8 @@ Example: #size-cells = <0>; regulators { + compatible = "maxim,max77802-pmic"; + ldo11_reg: LDO11 { regulator-name = "vdd_ldo11"; regulator-min-microvolt = <1900000>; -- 1.9.1