From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Tue, 4 Nov 2014 12:07:17 +0800 Subject: [PATCH 4/6] ARM: dts: sun9i: Add usb phy nodes to a80 dtsi In-Reply-To: <1415074039-16590-1-git-send-email-wens@csie.org> References: <1415074039-16590-1-git-send-email-wens@csie.org> Message-ID: <1415074039-16590-5-git-send-email-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On sun9i, there are 3 independent usb phys. Add device nodes for them. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun9i-a80.dtsi | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 3c25030..1a80e09 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -305,6 +305,43 @@ */ ranges = <0 0 0 0x20000000>; + usbphy0: phy at 00a00800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a00800 0x4>; + clocks = <&usb_phy_clk 1>; + clock-names = "phy"; + resets = <&usb_phy_clk 17>; + reset-names = "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + + usbphy1: phy at 00a01800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a01800 0x4>; + clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, + <&usb_phy_clk 3>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + /* usb1 is always used with HSIC */ + phy_type = "hsic"; + }; + + usbphy2: phy at 00a02800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a02800 0x4>; + clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>, + <&usb_phy_clk 5>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + gic: interrupt-controller at 01c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, -- 2.1.1