[PATCH v5 08/48] kernel: Move pm_power

linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v5 08/48] kernel: Move pm_power_off to common code
       [not found] <1415292213-28652-1-git-send-email-linux@roeck-us.net>
@ 2014-11-06 16:42 ` Guenter Roeck
  2014-11-06 16:42 ` [PATCH v5 12/48] mfd: ab8500-sysctrl: Register with kernel power-off handler Guenter Roeck
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2014-11-06 16:42 UTC (permalink / raw)
  To: linux-arm-kernel

pm_power_off is defined for all architectures. Move it to common code.

Have all architectures call do_kernel_power_off instead of pm_power_off.
Some architectures point pm_power_off to machine_power_off. For those,
call do_kernel_power_off from machine_power_off instead.

Acked-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v5:
- Rebase to v3.18-rc3
- Update powerpc code to reflect merged power-off handler changes
v4:
- No change
v3:
- Replace poweroff in all newly introduced variables and in text
  with power_off or power-off as appropriate
v2:
- do_kernel_poweroff -> do_kernel_power_off
- have_kernel_poweroff -> have_kernel_power_off

 arch/alpha/kernel/process.c        |  9 +++------
 arch/arc/kernel/reset.c            |  5 +----
 arch/arm/kernel/process.c          |  5 +----
 arch/arm64/kernel/process.c        |  5 +----
 arch/avr32/kernel/process.c        |  6 +-----
 arch/blackfin/kernel/process.c     |  3 ---
 arch/blackfin/kernel/reboot.c      |  2 ++
 arch/c6x/kernel/process.c          |  9 +--------
 arch/cris/kernel/process.c         |  4 +---
 arch/frv/kernel/process.c          |  5 ++---
 arch/hexagon/kernel/reset.c        |  5 ++---
 arch/ia64/kernel/process.c         |  5 +----
 arch/m32r/kernel/process.c         |  8 ++++----
 arch/m68k/kernel/process.c         |  6 +-----
 arch/metag/kernel/process.c        |  6 +-----
 arch/microblaze/kernel/process.c   |  3 ---
 arch/microblaze/kernel/reset.c     |  1 +
 arch/mips/kernel/reset.c           |  6 +-----
 arch/mn10300/kernel/process.c      |  8 ++------
 arch/openrisc/kernel/process.c     |  8 +++++---
 arch/parisc/kernel/process.c       |  8 ++++----
 arch/powerpc/kernel/setup-common.c |  6 +-----
 arch/powerpc/xmon/xmon.c           |  3 +--
 arch/s390/kernel/setup.c           |  8 ++------
 arch/score/kernel/process.c        |  8 ++++----
 arch/sh/kernel/reboot.c            |  6 +-----
 arch/sparc/kernel/process_32.c     | 10 ++--------
 arch/sparc/kernel/reboot.c         |  8 ++------
 arch/tile/kernel/reboot.c          |  7 +++----
 arch/um/kernel/reboot.c            |  2 --
 arch/unicore32/kernel/process.c    |  9 +--------
 arch/x86/kernel/reboot.c           | 11 +++--------
 arch/x86/xen/enlighten.c           |  3 +--
 arch/xtensa/kernel/process.c       |  4 ----
 drivers/parisc/power.c             |  3 +--
 kernel/power/power_off_handler.c   |  9 +++++++++
 kernel/reboot.c                    |  4 ++--
 37 files changed, 68 insertions(+), 150 deletions(-)

diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 1941a07..81c43f8 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -24,6 +24,7 @@
 #include <linux/vt.h>
 #include <linux/mman.h>
 #include <linux/elfcore.h>
+#include <linux/pm.h>
 #include <linux/reboot.h>
 #include <linux/tty.h>
 #include <linux/console.h>
@@ -40,12 +41,6 @@
 #include "proto.h"
 #include "pci_impl.h"
 
-/*
- * Power off function, if any
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 #ifdef CONFIG_ALPHA_WTINT
 /*
  * Sleep the CPU.
@@ -184,6 +179,8 @@ machine_halt(void)
 void
 machine_power_off(void)
 {
+	do_kernel_power_off();
+
 	common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
 }
 
diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c
index 2768fa1..0758d9d 100644
--- a/arch/arc/kernel/reset.c
+++ b/arch/arc/kernel/reset.c
@@ -26,9 +26,6 @@ void machine_restart(char *__unused)
 
 void machine_power_off(void)
 {
-	/* FIXME ::  power off ??? */
+	do_kernel_power_off();
 	machine_halt();
 }
-
-void (*pm_power_off) (void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index fe972a2..aa3f656 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -117,8 +117,6 @@ void soft_restart(unsigned long addr)
 /*
  * Function pointers to optional machine specific functions
  */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
 
 void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
 
@@ -205,8 +203,7 @@ void machine_power_off(void)
 	local_irq_disable();
 	smp_send_stop();
 
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 /*
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index fde9923..6f623a0 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -68,8 +68,6 @@ void soft_restart(unsigned long addr)
 /*
  * Function pointers to optional machine specific functions
  */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL_GPL(pm_power_off);
 
 void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
 
@@ -129,8 +127,7 @@ void machine_power_off(void)
 {
 	local_irq_disable();
 	smp_send_stop();
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 /*
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 42a53e74..529c1f6 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -23,9 +23,6 @@
 
 #include <mach/pm.h>
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 /*
  * This file handles the architecture-dependent parts of process handling..
  */
@@ -48,8 +45,7 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 void machine_restart(char *cmd)
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 4aa5545..812dd83 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -39,9 +39,6 @@ int nr_l1stack_tasks;
 void *l1_stack_base;
 unsigned long l1_stack_len;
 
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
 /*
  * The idle loop on BFIN
  */
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
index c4f50a3..387d610 100644
--- a/arch/blackfin/kernel/reboot.c
+++ b/arch/blackfin/kernel/reboot.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 #include <asm/bfin-global.h>
 #include <asm/reboot.h>
 #include <asm/bfrom.h>
@@ -106,6 +107,7 @@ void machine_halt(void)
 __attribute__((weak))
 void native_machine_power_off(void)
 {
+	do_kernel_power_off();
 	idle_with_irq_disabled();
 }
 
diff --git a/arch/c6x/kernel/process.c b/arch/c6x/kernel/process.c
index 57d2ea8..edf7e5a 100644
--- a/arch/c6x/kernel/process.c
+++ b/arch/c6x/kernel/process.c
@@ -27,12 +27,6 @@ void	(*c6x_halt)(void);
 extern asmlinkage void ret_from_fork(void);
 extern asmlinkage void ret_from_kernel_thread(void);
 
-/*
- * power off function, if any
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 void arch_cpu_idle(void)
 {
 	unsigned long tmp;
@@ -73,8 +67,7 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	halt_loop();
 }
 
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index b78498e..9ebd76b 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -31,9 +31,6 @@
 
 extern void default_idle(void);
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 void arch_cpu_idle(void)
 {
 	default_idle();
@@ -60,6 +57,7 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
+	do_kernel_power_off();
 }
 
 /*
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 5d40aeb77..502dabb 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -42,9 +42,6 @@ asmlinkage void ret_from_kernel_thread(void);
 
 #include <asm/pgalloc.h>
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 static void core_sleep_idle(void)
 {
 #ifdef LED_DEBUG_SLEEP
@@ -107,6 +104,8 @@ void machine_power_off(void)
 	gdbstub_exit(0);
 #endif
 
+	do_kernel_power_off();
+
 	for (;;);
 }
 
diff --git a/arch/hexagon/kernel/reset.c b/arch/hexagon/kernel/reset.c
index 76483c1..6f607b6 100644
--- a/arch/hexagon/kernel/reset.c
+++ b/arch/hexagon/kernel/reset.c
@@ -16,11 +16,13 @@
  * 02110-1301, USA.
  */
 
+#include <linux/pm.h>
 #include <linux/smp.h>
 #include <asm/hexagon_vm.h>
 
 void machine_power_off(void)
 {
+	do_kernel_power_off();
 	smp_send_stop();
 	__vmstop();
 }
@@ -32,6 +34,3 @@ void machine_halt(void)
 void machine_restart(char *cmd)
 {
 }
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index b515149..88121a2 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -57,8 +57,6 @@ void (*ia64_mark_idle)(int);
 
 unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
 EXPORT_SYMBOL(boot_option_idle_override);
-void (*pm_power_off) (void);
-EXPORT_SYMBOL(pm_power_off);
 
 void
 ia64_do_show_stack (struct unw_frame_info *info, void *arg)
@@ -675,8 +673,7 @@ machine_halt (void)
 void
 machine_power_off (void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	machine_halt();
 }
 
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index e69221d..65a037e 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -23,6 +23,7 @@
 #include <linux/fs.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/pm.h>
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/hardirq.h>
@@ -44,9 +45,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return tsk->thread.lr;
 }
 
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
 void machine_restart(char *__unused)
 {
 #if defined(CONFIG_PLAT_MAPPI3)
@@ -67,7 +65,9 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	/* M32R_FIXME */
+	do_kernel_power_off();
+	for (;;)
+		;
 }
 
 void show_regs(struct pt_regs * regs)
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index afe3d6e..bbc0a63 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -78,14 +78,10 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	for (;;);
 }
 
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 void show_regs(struct pt_regs * regs)
 {
 	printk("\n");
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff9..8d95773 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -67,9 +67,6 @@ void arch_cpu_idle_dead(void)
 }
 #endif
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 void (*soc_restart)(char *cmd);
 void (*soc_halt)(void);
 
@@ -90,8 +87,7 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	smp_send_stop();
 	hard_processor_halt(HALT_OK);
 }
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index b2dd371..0ebca36 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -44,9 +44,6 @@ void show_regs(struct pt_regs *regs)
 				regs->msr, regs->ear, regs->esr, regs->fsr);
 }
 
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
 void flush_thread(void)
 {
 }
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index fbe58c6..2c6b32c 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -103,6 +103,7 @@ void machine_halt(void)
 void machine_power_off(void)
 {
 	pr_notice("Machine power off...\n");
+	do_kernel_power_off();
 	while (1)
 		;
 }
diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c
index 07fc524..09e74d2 100644
--- a/arch/mips/kernel/reset.c
+++ b/arch/mips/kernel/reset.c
@@ -21,9 +21,6 @@
  */
 void (*_machine_restart)(char *command);
 void (*_machine_halt)(void);
-void (*pm_power_off)(void);
-
-EXPORT_SYMBOL(pm_power_off);
 
 void machine_restart(char *command)
 {
@@ -39,6 +36,5 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 3707da5..c78b2eb 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -20,6 +20,7 @@
 #include <linux/user.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/pm.h>
 #include <linux/reboot.h>
 #include <linux/percpu.h>
 #include <linux/err.h>
@@ -45,12 +46,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 }
 
 /*
- * power off function, if any
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-/*
  * On SMP it's slightly faster (but much more power-consuming!)
  * to poll the ->work.need_resched flag instead of waiting for the
  * cross-CPU IPI to arrive. Use this option with caution.
@@ -93,6 +88,7 @@ void machine_power_off(void)
 #ifdef CONFIG_KERNEL_DEBUGGER
 	gdbstub_exit(0);
 #endif
+	do_kernel_power_off();
 }
 
 void show_regs(struct pt_regs *regs)
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
index 386af25..494afd2 100644
--- a/arch/openrisc/kernel/process.c
+++ b/arch/openrisc/kernel/process.c
@@ -25,6 +25,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/pm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
@@ -51,7 +52,7 @@
  */
 struct thread_info *current_thread_info_set[NR_CPUS] = { &init_thread_info, };
 
-void machine_restart(void)
+void machine_restart(char *cmd)
 {
 	printk(KERN_INFO "*** MACHINE RESTART ***\n");
 	__asm__("l.nop 1");
@@ -72,11 +73,12 @@ void machine_halt(void)
 void machine_power_off(void)
 {
 	printk(KERN_INFO "*** MACHINE POWER OFF ***\n");
+
+	do_kernel_power_off();
+
 	__asm__("l.nop 1");
 }
 
-void (*pm_power_off) (void) = machine_power_off;
-
 /*
  * When a process does an "exec", machine state like FPU and debug
  * registers need to be reset.  This is a hook function for that.
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 0bbbf0d..3f5d14a 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -41,6 +41,7 @@
 #include <linux/fs.h>
 #include <linux/module.h>
 #include <linux/personality.h>
+#include <linux/pm.h>
 #include <linux/ptrace.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -133,7 +134,9 @@ void machine_power_off(void)
 	pdc_soft_power_button(0);
 	
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_SHUTDOWN);
-		
+
+	do_kernel_power_off();
+
 	/* It seems we have no way to power the system off via
 	 * software. The user has to press the button himself. */
 
@@ -141,9 +144,6 @@ void machine_power_off(void)
 	       "Please power this system off now.");
 }
 
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 /*
  * Free current thread data structures etc..
  */
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 44c8d03..a2efce7 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -139,8 +139,7 @@ void machine_restart(char *cmd)
 void machine_power_off(void)
 {
 	machine_shutdown();
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 #ifdef CONFIG_SMP
 	smp_send_stop();
 #endif
@@ -151,9 +150,6 @@ void machine_power_off(void)
 /* Used by the G5 thermal driver */
 EXPORT_SYMBOL_GPL(machine_power_off);
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL_GPL(pm_power_off);
-
 void machine_halt(void)
 {
 	machine_shutdown();
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 506d256..8780178 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -981,8 +981,7 @@ static void bootcmds(void)
 	else if (cmd == 'h')
 		ppc_md.halt();
 	else if (cmd == 'p')
-		if (pm_power_off)
-			pm_power_off();
+		do_kernel_power_off();
 }
 
 static int cpu_cmd(void)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index e80d9ff..267e025 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -263,13 +263,9 @@ void machine_power_off(void)
 		 */
 		console_unblank();
 	_machine_power_off();
-}
 
-/*
- * Dummy power off function.
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL_GPL(pm_power_off);
+	do_kernel_power_off();
+}
 
 static int __init early_parse_mem(char *p)
 {
diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
index a1519ad3..b76ea67 100644
--- a/arch/score/kernel/process.c
+++ b/arch/score/kernel/process.c
@@ -29,9 +29,6 @@
 #include <linux/pm.h>
 #include <linux/rcupdate.h>
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 /* If or when software machine-restart is implemented, add code here. */
 void machine_restart(char *command) {}
 
@@ -39,7 +36,10 @@ void machine_restart(char *command) {}
 void machine_halt(void) {}
 
 /* If or when software machine-power-off is implemented, add code here. */
-void machine_power_off(void) {}
+void machine_power_off(void)
+{
+	do_kernel_power_off();
+}
 
 void ret_from_fork(void);
 void ret_from_kernel_thread(void);
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
index 04afe5b..065de12 100644
--- a/arch/sh/kernel/reboot.c
+++ b/arch/sh/kernel/reboot.c
@@ -11,9 +11,6 @@
 #include <asm/tlbflush.h>
 #include <asm/traps.h>
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 #ifdef CONFIG_SUPERH32
 static void watchdog_trigger_immediate(void)
 {
@@ -51,8 +48,7 @@ static void native_machine_shutdown(void)
 
 static void native_machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 static void native_machine_halt(void)
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 50e7b62..cb8148a 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -48,14 +48,6 @@
  */
 void (*sparc_idle)(void);
 
-/* 
- * Power-off handler instantiation for pm.h compliance
- * This is done via auxio, but could be used as a fallback
- * handler when auxio is not present-- unused for now...
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 /*
  * sysctl - toggle power-off restriction for serial console 
  * systems in machine_power_off()
@@ -112,6 +104,8 @@ void machine_power_off(void)
 		sbus_writeb(power_register, auxio_power_register);
 	}
 
+	do_kernel_power_off();
+
 	machine_halt();
 }
 
diff --git a/arch/sparc/kernel/reboot.c b/arch/sparc/kernel/reboot.c
index eba7d91..3c0bb03 100644
--- a/arch/sparc/kernel/reboot.c
+++ b/arch/sparc/kernel/reboot.c
@@ -16,17 +16,13 @@
  */
 int scons_pwroff = 1;
 
-/* This isn't actually used, it exists merely to satisfy the
- * reference in kernel/sys.c
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 void machine_power_off(void)
 {
 	if (strcmp(of_console_device->type, "serial") || scons_pwroff)
 		prom_halt_power_off();
 
+	do_kernel_power_off();
+
 	prom_halt();
 }
 
diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c
index 6c5d2c0..8ff4a7f 100644
--- a/arch/tile/kernel/reboot.c
+++ b/arch/tile/kernel/reboot.c
@@ -36,6 +36,9 @@ void machine_power_off(void)
 {
 	arch_local_irq_disable_all();
 	smp_send_stop();
+
+	do_kernel_power_off();
+
 	hv_power_off();
 }
 
@@ -45,7 +48,3 @@ void machine_restart(char *cmd)
 	smp_send_stop();
 	hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd);
 }
-
-/* No interesting distinction to be made here. */
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c
index ced8903..a82ef28 100644
--- a/arch/um/kernel/reboot.c
+++ b/arch/um/kernel/reboot.c
@@ -11,8 +11,6 @@
 #include <os.h>
 #include <skas.h>
 
-void (*pm_power_off)(void);
-
 static void kill_off_processes(void)
 {
 	if (proc_mm)
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index b008e99..9490dd5 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -56,16 +56,9 @@ void machine_halt(void)
 	gpio_set_value(GPO_SOFT_OFF, 0);
 }
 
-/*
- * Function pointers to optional machine specific functions
- */
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	machine_halt();
 }
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 17962e6..5c09e28 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -30,12 +30,6 @@
 #include <asm/x86_init.h>
 #include <asm/efi.h>
 
-/*
- * Power off function, if any
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 static const struct desc_ptr no_idt = {};
 
 /*
@@ -647,11 +641,12 @@ static void native_machine_halt(void)
 
 static void native_machine_power_off(void)
 {
-	if (pm_power_off) {
+	if (have_kernel_power_off()) {
 		if (!reboot_force)
 			machine_shutdown();
-		pm_power_off();
+		do_kernel_power_off();
 	}
+
 	/* A fallback in case there is no PM info available */
 	tboot_shutdown(TB_SHUTDOWN_HALT);
 }
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index fac5e4f..bc08998 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1320,8 +1320,7 @@ static void xen_machine_halt(void)
 
 static void xen_machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	xen_reboot(SHUTDOWN_poweroff);
 }
 
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 1c85323..c487296 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -49,10 +49,6 @@ extern void ret_from_kernel_thread(void);
 
 struct task_struct *current_set[NR_CPUS] = {&init_task, };
 
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-
 #if XTENSA_HAVE_COPROCESSORS
 
 void coprocessor_release_all(struct thread_info *ti)
diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c
index ef31b77..f10cf92 100644
--- a/drivers/parisc/power.c
+++ b/drivers/parisc/power.c
@@ -95,8 +95,7 @@ static void process_shutdown(void)
 		/* send kill signal */
 		if (kill_cad_pid(SIGINT, 1)) {
 			/* just in case killing init process failed */
-			if (pm_power_off)
-				pm_power_off();
+			kernel_power_off();
 		}
 	}
 }
diff --git a/kernel/power/power_off_handler.c b/kernel/power/power_off_handler.c
index e576534..e283ea1 100644
--- a/kernel/power/power_off_handler.c
+++ b/kernel/power/power_off_handler.c
@@ -23,6 +23,12 @@
 #include <linux/types.h>
 
 /*
+ * If set, calling this function will power off the system immediately.
+ */
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+/*
  * List of handlers for kernel code which wants to be called
  * to power off the system.
  */
@@ -272,6 +278,9 @@ void do_kernel_power_off(void)
 	 * that risk.
 	 */
 
+	if (pm_power_off)
+		pm_power_off();
+
 	p = rcu_dereference_raw(power_off_handler_list);
 	while (p) {
 		next_p = rcu_dereference_raw(p->next);
diff --git a/kernel/reboot.c b/kernel/reboot.c
index 5925f5a..d87d921 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -306,9 +306,9 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 		return ret;
 
 	/* Instead of trying to make the power_off code look like
-	 * halt when pm_power_off is not set do it the easy way.
+	 * halt when no power-off handler exists do it the easy way.
 	 */
-	if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
+	if (cmd == LINUX_REBOOT_CMD_POWER_OFF && !have_kernel_power_off())
 		cmd = LINUX_REBOOT_CMD_HALT;
 
 	mutex_lock(&reboot_mutex);
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 12/48] mfd: ab8500-sysctrl: Register with kernel power-off handler
       [not found] <1415292213-28652-1-git-send-email-linux@roeck-us.net>
  2014-11-06 16:42 ` [PATCH v5 08/48] kernel: Move pm_power_off to common code Guenter Roeck
@ 2014-11-06 16:42 ` Guenter Roeck
  2014-11-06 16:43 ` [PATCH v5 35/48] arm: " Guenter Roeck
  2014-11-06 16:43 ` [PATCH v5 36/48] arm64: psci: " Guenter Roeck
  3 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2014-11-06 16:42 UTC (permalink / raw)
  To: linux-arm-kernel

Register with kernel power-off handler instead of setting pm_power_off
directly. Register with low priority to reflect that the original code
only sets pm_power_off if it was not already set.

sysctrl_dev is set prior to power-off handler registration, and the
power-off handler is unregistered prior to clearing sysrctrl_dev.
It is therefore not necessary to check if sysctrl_dev is NULL in the
power-off handler, and the check was removed. Setting sysctrl_dev to NULL
in the remove function was also removed as unnecessary. With those changes,
devm_register_power_off_handler can be used to register the poeroff handler.
The now empty remove function was retained since the ab8500_restart function,
which is currently unused, would likely need some cleanup if it was ever used.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v5:
- Rebase to v3.18-rc3
v4:
- Do not use notifiers but internal functions and data structures to manage
  the list of power-off handlers. Drop unused parameters from callbacks, and
  make the power-off function type void
v3:
- Replace poweroff in all newly introduced variables and in text
  with power_off or power-off as appropriate
- Replace POWEROFF_PRIORITY_xxx with POWER_OFF_PRIORITY_xxx
v2:
- Use define to specify poweroff handler priority
- Use devm_register_power_off_handler
- Use dev_warn instead of dev_err
- Since we use devm_register_power_off_handler,
  we need to check if sysctrl_dev in the poweroff handler to avoid
  a race condition on unload, so this check is no longer removed

 drivers/mfd/ab8500-sysctrl.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 8e0dae5..bd382de 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -23,7 +23,7 @@
 
 static struct device *sysctrl_dev;
 
-static void ab8500_power_off(void)
+static void ab8500_power_off(struct power_off_handler_block *this)
 {
 	sigset_t old;
 	sigset_t all;
@@ -85,6 +85,11 @@ shutdown:
 	}
 }
 
+static struct power_off_handler_block ab8500_power_off_hb = {
+	.handler = ab8500_power_off,
+	.priority = POWER_OFF_PRIORITY_LOW,
+};
+
 /*
  * Use the AB WD to reset the platform. It will perform a hard
  * reset instead of a soft reset. Write the reset reason to
@@ -185,6 +190,7 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev)
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct ab8500_platform_data *plat;
 	struct ab8500_sysctrl_platform_data *pdata;
+	int err;
 
 	plat = dev_get_platdata(pdev->dev.parent);
 
@@ -193,8 +199,10 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev)
 
 	sysctrl_dev = &pdev->dev;
 
-	if (!pm_power_off)
-		pm_power_off = ab8500_power_off;
+	err = devm_register_power_off_handler(sysctrl_dev,
+					      &ab8500_power_off_hb);
+	if (err)
+		dev_warn(&pdev->dev, "Failed to register power-off handler\n");
 
 	pdata = plat->sysctrl;
 	if (pdata) {
@@ -228,9 +236,6 @@ static int ab8500_sysctrl_remove(struct platform_device *pdev)
 {
 	sysctrl_dev = NULL;
 
-	if (pm_power_off == ab8500_power_off)
-		pm_power_off = NULL;
-
 	return 0;
 }
 
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 35/48] arm: Register with kernel power-off handler
       [not found] <1415292213-28652-1-git-send-email-linux@roeck-us.net>
  2014-11-06 16:42 ` [PATCH v5 08/48] kernel: Move pm_power_off to common code Guenter Roeck
  2014-11-06 16:42 ` [PATCH v5 12/48] mfd: ab8500-sysctrl: Register with kernel power-off handler Guenter Roeck
@ 2014-11-06 16:43 ` Guenter Roeck
  2014-11-06 16:43 ` [PATCH v5 36/48] arm64: psci: " Guenter Roeck
  3 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2014-11-06 16:43 UTC (permalink / raw)
  To: linux-arm-kernel

Register with kernel power-off handler instead of setting pm_power_off
directly. Always use register_power_off_handler_simple as there is no
indication that more than one power-off handler is registered.

If the power-off handler only resets the system or puts the CPU in sleep mode,
select the fallback priority to indicate that the power-off handler is one
of last resort. If the power-off handler powers off the system, select the
default priority.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v5:
- Rebase to v3.18-rc3
v4:
- No change
v3:
- Replace poweroff in all newly introduced variables and in text
  with power_off or power-off as appropriate
- Replace POWEROFF_PRIORITY_xxx with POWER_OFF_PRIORITY_xxx
v2:
- Use defines to specify poweroff handler priorities
- Drop changes in arch/arm/mach-at91/setup.c (file removed upstream)

 arch/arm/kernel/psci.c                         | 3 ++-
 arch/arm/mach-at91/board-gsia18s.c             | 3 ++-
 arch/arm/mach-bcm/board_bcm2835.c              | 3 ++-
 arch/arm/mach-cns3xxx/cns3420vb.c              | 3 ++-
 arch/arm/mach-cns3xxx/core.c                   | 3 ++-
 arch/arm/mach-highbank/highbank.c              | 3 ++-
 arch/arm/mach-imx/mach-mx31moboard.c           | 3 ++-
 arch/arm/mach-iop32x/em7210.c                  | 3 ++-
 arch/arm/mach-iop32x/glantank.c                | 3 ++-
 arch/arm/mach-iop32x/iq31244.c                 | 3 ++-
 arch/arm/mach-iop32x/n2100.c                   | 3 ++-
 arch/arm/mach-ixp4xx/dsmg600-setup.c           | 3 ++-
 arch/arm/mach-ixp4xx/nas100d-setup.c           | 3 ++-
 arch/arm/mach-ixp4xx/nslu2-setup.c             | 3 ++-
 arch/arm/mach-omap2/board-omap3touchbook.c     | 3 ++-
 arch/arm/mach-orion5x/board-mss2.c             | 3 ++-
 arch/arm/mach-orion5x/dns323-setup.c           | 9 ++++++---
 arch/arm/mach-orion5x/kurobox_pro-setup.c      | 3 ++-
 arch/arm/mach-orion5x/ls-chl-setup.c           | 3 ++-
 arch/arm/mach-orion5x/ls_hgl-setup.c           | 3 ++-
 arch/arm/mach-orion5x/lsmini-setup.c           | 3 ++-
 arch/arm/mach-orion5x/mv2120-setup.c           | 3 ++-
 arch/arm/mach-orion5x/net2big-setup.c          | 3 ++-
 arch/arm/mach-orion5x/terastation_pro2-setup.c | 3 ++-
 arch/arm/mach-orion5x/ts209-setup.c            | 3 ++-
 arch/arm/mach-orion5x/ts409-setup.c            | 3 ++-
 arch/arm/mach-pxa/corgi.c                      | 3 ++-
 arch/arm/mach-pxa/mioa701.c                    | 3 ++-
 arch/arm/mach-pxa/poodle.c                     | 3 ++-
 arch/arm/mach-pxa/spitz.c                      | 3 ++-
 arch/arm/mach-pxa/tosa.c                       | 3 ++-
 arch/arm/mach-pxa/viper.c                      | 3 ++-
 arch/arm/mach-pxa/z2.c                         | 7 ++++---
 arch/arm/mach-pxa/zeus.c                       | 7 ++++---
 arch/arm/mach-s3c24xx/mach-gta02.c             | 3 ++-
 arch/arm/mach-s3c24xx/mach-jive.c              | 3 ++-
 arch/arm/mach-s3c24xx/mach-vr1000.c            | 3 ++-
 arch/arm/mach-s3c64xx/mach-smartq.c            | 3 ++-
 arch/arm/mach-sa1100/generic.c                 | 3 ++-
 arch/arm/mach-sa1100/simpad.c                  | 3 ++-
 arch/arm/mach-u300/regulator.c                 | 3 ++-
 arch/arm/mach-vt8500/vt8500.c                  | 3 ++-
 arch/arm/xen/enlighten.c                       | 3 ++-
 43 files changed, 94 insertions(+), 49 deletions(-)

diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c
index f73891b..a7a2b4a 100644
--- a/arch/arm/kernel/psci.c
+++ b/arch/arm/kernel/psci.c
@@ -264,7 +264,8 @@ static int psci_0_2_init(struct device_node *np)
 
 	arm_pm_restart = psci_sys_reset;
 
-	pm_power_off = psci_sys_poweroff;
+	register_power_off_handler_simple(psci_sys_poweroff,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 out_put_node:
 	of_node_put(np);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index bf5cc55..e628c4a 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -521,7 +521,8 @@ static void gsia18s_power_off(void)
 
 static int __init gsia18s_power_off_init(void)
 {
-	pm_power_off = gsia18s_power_off;
+	register_power_off_handler_simple(gsia18s_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 	return 0;
 }
 
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 70f2f39..1d75c76 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -111,7 +111,8 @@ static void __init bcm2835_init(void)
 
 	bcm2835_setup_restart();
 	if (wdt_regs)
-		pm_power_off = bcm2835_power_off;
+		register_power_off_handler_simple(bcm2835_power_off,
+						  POWER_OFF_PRIORITY_FALLBACK);
 
 	bcm2835_init_clocks();
 
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 6428bcc7..5c50461 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -224,7 +224,8 @@ static void __init cns3420_init(void)
 	cns3xxx_ahci_init();
 	cns3xxx_sdhci_init();
 
-	pm_power_off = cns3xxx_power_off;
+	register_power_off_handler_simple(cns3xxx_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 static struct map_desc cns3420_io_desc[] __initdata = {
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 4e9837d..9c214cf 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -386,7 +386,8 @@ static void __init cns3xxx_init(void)
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
 	}
 
-	pm_power_off = cns3xxx_power_off;
+	register_power_off_handler_simple(cns3xxx_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	of_platform_populate(NULL, of_default_bus_match_table,
                         cns3xxx_auxdata, NULL);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 07a0957..6fbdc01 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -155,7 +155,8 @@ static void __init highbank_init(void)
 	sregs_base = of_iomap(np, 0);
 	WARN_ON(!sregs_base);
 
-	pm_power_off = highbank_power_off;
+	register_power_off_handler_simple(highbank_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
 	highbank_pm_init();
 
 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index bb6f8a5..3001b14 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -559,7 +559,8 @@ static void __init mx31moboard_init(void)
 
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 
-	pm_power_off = mx31moboard_poweroff;
+	register_power_off_handler_simple(mx31moboard_poweroff,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 77e1ff0..fd3ad09 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -201,7 +201,8 @@ static int __init em7210_request_gpios(void)
 		return 0;
 	}
 
-	pm_power_off = em7210_power_off;
+	register_power_off_handler_simple(em7210_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 547b234..9298ea0 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -199,7 +199,8 @@ static void __init glantank_init_machine(void)
 	i2c_register_board_info(0, glantank_i2c_devices,
 		ARRAY_SIZE(glantank_i2c_devices));
 
-	pm_power_off = glantank_power_off;
+	register_power_off_handler_simple(glantank_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(GLANTANK, "GLAN Tank")
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 0e1392b..50ba54b 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -293,7 +293,8 @@ static void __init iq31244_init_machine(void)
 	platform_device_register(&iop3xx_dma_1_channel);
 
 	if (is_ep80219())
-		pm_power_off = ep80219_power_off;
+		register_power_off_handler_simple(ep80219_power_off,
+						  POWER_OFF_PRIORITY_DEFAULT);
 
 	if (!is_80219())
 		platform_device_register(&iop3xx_aau_channel);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index c1cd80e..734a092 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -356,7 +356,8 @@ static void __init n2100_init_machine(void)
 	i2c_register_board_info(0, n2100_i2c_devices,
 		ARRAY_SIZE(n2100_i2c_devices));
 
-	pm_power_off = n2100_power_off;
+	register_power_off_handler_simple(n2100_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(N2100, "Thecus N2100")
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 43ee06d..f34564d 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -281,7 +281,8 @@ static void __init dsmg600_init(void)
 
 	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
 
-	pm_power_off = dsmg600_power_off;
+	register_power_off_handler_simple(dsmg600_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 4e0f762..43a9333 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -292,7 +292,8 @@ static void __init nas100d_init(void)
 
 	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
 
-	pm_power_off = nas100d_power_off;
+	register_power_off_handler_simple(nas100d_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
 		IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) {
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 88c025f..e094d5f 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -262,7 +262,8 @@ static void __init nslu2_init(void)
 
 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
 
-	pm_power_off = nslu2_power_off;
+	register_power_off_handler_simple(nslu2_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
 		IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index a01993e..8abce2c 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -344,7 +344,8 @@ static void __init omap3_touchbook_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
-	pm_power_off = omap3_touchbook_poweroff;
+	register_power_off_handler_simple(omap3_touchbook_poweroff,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
 		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index 66f9c3b..cac2793 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -86,5 +86,6 @@ static void mss2_power_off(void)
 void __init mss2_init(void)
 {
 	/* register mss2 specific power-off method */
-	pm_power_off = mss2_power_off;
+	register_power_off_handler_simple(mss2_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
 }
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 09d2a26..9876509 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -669,7 +669,8 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323a_power_off;
+		register_power_off_handler_simple(dns323a_power_off,
+						  POWER_OFF_PRIORITY_DEFAULT);
 		break;
 	case DNS323_REV_B1:
 		/* 5182 built-in SATA init */
@@ -686,7 +687,8 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323b_power_off;
+		register_power_off_handler_simple(dns323b_power_off,
+						  POWER_OFF_PRIORITY_DEFAULT);
 		break;
 	case DNS323_REV_C1:
 		/* 5182 built-in SATA init */
@@ -696,7 +698,8 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323c_power_off;
+		register_power_off_handler_simple(dns323c_power_off,
+						  POWER_OFF_PRIORITY_DEFAULT);
 
 		/* Now, -this- should theorically be done by the sata_mv driver
 		 * once I figure out what's going on there. Maybe the behaviour
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index fe6a48a..872d4fe 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -376,7 +376,8 @@ static void __init kurobox_pro_init(void)
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
 
 	/* register Kurobox Pro specific power-off method */
-	pm_power_off = kurobox_pro_power_off;
+	register_power_off_handler_simple(kurobox_pro_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 #ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 028ea03..3f540d1 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -312,7 +312,8 @@ static void __init lschl_init(void)
 	gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
 
 	/* register power-off method */
-	pm_power_off = lschl_power_off;
+	register_power_off_handler_simple(lschl_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
 
 	pr_info("%s: finished\n", __func__);
 }
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 32b7129..699a5a1 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -259,7 +259,8 @@ static void __init ls_hgl_init(void)
 	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
 
 	/* register power-off method */
-	pm_power_off = ls_hgl_power_off;
+	register_power_off_handler_simple(ls_hgl_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
 
 	pr_info("%s: finished\n", __func__);
 }
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index a6493e7..c5712ff 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -260,7 +260,8 @@ static void __init lsmini_init(void)
 	gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
 
 	/* register power-off method */
-	pm_power_off = lsmini_power_off;
+	register_power_off_handler_simple(lsmini_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
 
 	pr_info("%s: finished\n", __func__);
 }
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index e032f01..13efbec 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -225,7 +225,8 @@ static void __init mv2120_init(void)
 	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
 		pr_err("mv2120: failed to setup power-off GPIO\n");
-	pm_power_off = mv2120_power_off;
+	register_power_off_handler_simple(mv2120_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index ba73dc7..c7648f0 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -413,7 +413,8 @@ static void __init net2big_init(void)
 
 	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
 	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = net2big_power_off;
+		register_power_off_handler_simple(net2big_power_off,
+						  POWER_OFF_PRIORITY_DEFAULT);
 	else
 		pr_err("net2big: failed to configure power-off GPIO\n");
 
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 1208674..227ae91 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -353,7 +353,8 @@ static void __init tsp2_init(void)
 	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
 
 	/* register Terastation Pro II specific power-off method */
-	pm_power_off = tsp2_power_off;
+	register_power_off_handler_simple(tsp2_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index c725b7c..540e3f3 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -318,7 +318,8 @@ static void __init qnap_ts209_init(void)
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_power_off_handler_simple(qnap_tsx09_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index cf2ab53..40cbdd7 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -307,7 +307,8 @@ static void __init qnap_ts409_init(void)
 	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_power_off_handler_simple(qnap_tsx09_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(TS409, "QNAP TS-409")
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 06022b2..93b73a1 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -718,7 +718,8 @@ static void corgi_restart(enum reboot_mode mode, const char *cmd)
 
 static void __init corgi_init(void)
 {
-	pm_power_off = corgi_poweroff;
+	register_power_off_handler_simple(corgi_poweroff,
+					  POWER_OFF_PRIORITY_FALLBACK);
 
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 29997bd..5d318d4 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -750,7 +750,8 @@ static void __init mioa701_machine_init(void)
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
-	pm_power_off = mioa701_poweroff;
+	register_power_off_handler_simple(mioa701_poweroff,
+					  POWER_OFF_PRIORITY_FALLBACK);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1319916..749d2af 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -432,7 +432,8 @@ static void __init poodle_init(void)
 {
 	int ret = 0;
 
-	pm_power_off = poodle_poweroff;
+	register_power_off_handler_simple(poodle_poweroff,
+					  POWER_OFF_PRIORITY_FALLBACK);
 
 	PCFR |= PCFR_OPDE;
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 840c3a4..ab25b6c 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -944,7 +944,8 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd)
 static void __init spitz_init(void)
 {
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
-	pm_power_off = spitz_poweroff;
+	register_power_off_handler_simple(spitz_poweroff,
+					  POWER_OFF_PRIORITY_FALLBACK);
 
 	PMCR = 0x00;
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c158a6e..8823448 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -940,7 +940,8 @@ static void __init tosa_init(void)
 
 	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
-	pm_power_off = tosa_poweroff;
+	register_power_off_handler_simple(tosa_poweroff,
+					  POWER_OFF_PRIORITY_FALLBACK);
 
 	PCFR |= PCFR_OPDE;
 
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index de3b080..6bb4de3 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -919,7 +919,8 @@ static void __init viper_init(void)
 {
 	u8 version;
 
-	pm_power_off = viper_power_off;
+	register_power_off_handler_simple(viper_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e1a121b..0d0a6ae 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -693,8 +693,6 @@ static void z2_power_off(void)
 	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
 	pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
 }
-#else
-#define z2_power_off   NULL
 #endif
 
 /******************************************************************************
@@ -719,7 +717,10 @@ static void __init z2_init(void)
 	z2_keys_init();
 	z2_pmic_init();
 
-	pm_power_off = z2_power_off;
+#ifdef CONFIG_PM
+	register_power_off_handler_simple(z2_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
+#endif
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 205f9bf..457eed1 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -690,8 +690,6 @@ static void zeus_power_off(void)
 	local_irq_disable();
 	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
 }
-#else
-#define zeus_power_off   NULL
 #endif
 
 #ifdef CONFIG_APM_EMULATION
@@ -847,7 +845,10 @@ static void __init zeus_init(void)
 	__raw_writel(msc0, MSC0);
 	__raw_writel(msc1, MSC1);
 
-	pm_power_off = zeus_power_off;
+#ifdef CONFIG_PM
+	register_power_off_handler_simple(zeus_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
+#endif
 	zeus_setup_apm();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 6d1e0b9..8366b3e 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -579,7 +579,8 @@ static void __init gta02_machine_init(void)
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
 
 	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-	pm_power_off = gta02_poweroff;
+	register_power_off_handler_simple(gta02_poweroff,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	regulator_has_full_constraints();
 }
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 7d99fe8..20beb39 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -657,7 +657,8 @@ static void __init jive_machine_init(void)
 	s3c_i2c0_set_platdata(&jive_i2c_cfg);
 	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 
-	pm_power_off = jive_power_off;
+	register_power_off_handler_simple(jive_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
 }
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 89f32bd..1f32ba7 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -306,7 +306,8 @@ static void vr1000_power_off(void)
 
 static void __init vr1000_map_io(void)
 {
-	pm_power_off = vr1000_power_off;
+	register_power_off_handler_simple(vr1000_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index b3d1353..b30906f 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -291,7 +291,8 @@ static int __init smartq_power_off_init(void)
 	/* leave power on */
 	gpio_direction_output(S3C64XX_GPK(15), 0);
 
-	pm_power_off = smartq_power_off;
+	register_power_off_handler_simple(smartq_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	return ret;
 }
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index d4ea142..371bffe 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -311,7 +311,8 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 
 static int __init sa1100_init(void)
 {
-	pm_power_off = sa1100_power_off;
+	register_power_off_handler_simple(sa1100_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
 	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
 }
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 41e476e..fb85730 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -373,7 +373,8 @@ static int __init simpad_init(void)
 	if (ret)
 		printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
 
-	pm_power_off = simpad_power_off;
+	register_power_off_handler_simple(simpad_power_off,
+					  POWER_OFF_PRIORITY_FALLBACK);
 
 	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index 0493a84..4ff09b0 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -98,7 +98,8 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
 			   U300_SYSCON_PMCR_DCON_ENABLE, 0);
 
 	/* Register globally exported PM poweroff hook */
-	pm_power_off = u300_pm_poweroff;
+	register_power_off_handler_simple(u300_pm_poweroff,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3bc0dc9..48e4fbf 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -155,7 +155,8 @@ static void __init vt8500_init(void)
 			pr_err("%s:ioremap(power_off) failed\n", __func__);
 	}
 	if (pmc_base)
-		pm_power_off = &vt8500_power_off;
+		register_power_off_handler_simple(vt8500_power_off,
+						  POWER_OFF_PRIORITY_FALLBACK);
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 0e15f01..1c8bce0 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -336,7 +336,8 @@ static int __init xen_pm_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
-	pm_power_off = xen_power_off;
+	register_power_off_handler_simple(xen_power_off,
+					  POWER_OFF_PRIORITY_DEFAULT);
 	arm_pm_restart = xen_restart;
 
 	return 0;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 36/48] arm64: psci: Register with kernel power-off handler
       [not found] <1415292213-28652-1-git-send-email-linux@roeck-us.net>
                   ` (2 preceding siblings ...)
  2014-11-06 16:43 ` [PATCH v5 35/48] arm: " Guenter Roeck
@ 2014-11-06 16:43 ` Guenter Roeck
  2014-11-06 17:22   ` Mark Rutland
  3 siblings, 1 reply; 6+ messages in thread
From: Guenter Roeck @ 2014-11-06 16:43 UTC (permalink / raw)
  To: linux-arm-kernel

Register with kernel power-off handler instead of setting pm_power_off
directly.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v5:
- Rebase to v3.18-rc3
v4:
- No change
v3:
- Replace poweroff in all newly introduced variables and in text
  with power_off or power-off as appropriate
- Replace POWEROFF_PRIORITY_xxx with POWER_OFF_PRIORITY_xxx
v2:
- Use define to specify poweroff handler priority

 arch/arm64/kernel/psci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index 866c1c8..5cab066 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -359,7 +359,8 @@ static int __init psci_0_2_init(struct device_node *np)
 
 	arm_pm_restart = psci_sys_reset;
 
-	pm_power_off = psci_sys_poweroff;
+	register_power_off_handler_simple(psci_sys_poweroff,
+					  POWER_OFF_PRIORITY_DEFAULT);
 
 out_put_node:
 	of_node_put(np);
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 36/48] arm64: psci: Register with kernel power-off handler
  2014-11-06 16:43 ` [PATCH v5 36/48] arm64: psci: " Guenter Roeck
@ 2014-11-06 17:22   ` Mark Rutland
  2014-11-06 18:51     ` Guenter Roeck
  0 siblings, 1 reply; 6+ messages in thread
From: Mark Rutland @ 2014-11-06 17:22 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, Nov 06, 2014 at 04:43:20PM +0000, Guenter Roeck wrote:
> Register with kernel power-off handler instead of setting pm_power_off
> directly.
> 
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

I just fetched your current poweroff-handler branch and gave it a spin
on Juno. It looks like this hasn't broken since the last time I tried
it. :)

Tested-by: Mark Rutland <mark.rutland@arm.com>

Thanks,
Mark.

> ---
> v5:
> - Rebase to v3.18-rc3
> v4:
> - No change
> v3:
> - Replace poweroff in all newly introduced variables and in text
>   with power_off or power-off as appropriate
> - Replace POWEROFF_PRIORITY_xxx with POWER_OFF_PRIORITY_xxx
> v2:
> - Use define to specify poweroff handler priority
> 
>  arch/arm64/kernel/psci.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
> index 866c1c8..5cab066 100644
> --- a/arch/arm64/kernel/psci.c
> +++ b/arch/arm64/kernel/psci.c
> @@ -359,7 +359,8 @@ static int __init psci_0_2_init(struct device_node *np)
>  
>  	arm_pm_restart = psci_sys_reset;
>  
> -	pm_power_off = psci_sys_poweroff;
> +	register_power_off_handler_simple(psci_sys_poweroff,
> +					  POWER_OFF_PRIORITY_DEFAULT);
>  
>  out_put_node:
>  	of_node_put(np);
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v5 36/48] arm64: psci: Register with kernel power-off handler
  2014-11-06 17:22   ` Mark Rutland
@ 2014-11-06 18:51     ` Guenter Roeck
  0 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2014-11-06 18:51 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, Nov 06, 2014 at 05:22:23PM +0000, Mark Rutland wrote:
> On Thu, Nov 06, 2014 at 04:43:20PM +0000, Guenter Roeck wrote:
> > Register with kernel power-off handler instead of setting pm_power_off
> > directly.
> > 
> > Cc: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Will Deacon <will.deacon@arm.com>
> > Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> 
> I just fetched your current poweroff-handler branch and gave it a spin
> on Juno. It looks like this hasn't broken since the last time I tried
> it. :)
> 
> Tested-by: Mark Rutland <mark.rutland@arm.com>
> 
Thanks a lot!

Guenter

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2014-11-06 18:51 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <1415292213-28652-1-git-send-email-linux@roeck-us.net>
2014-11-06 16:42 ` [PATCH v5 08/48] kernel: Move pm_power_off to common code Guenter Roeck
2014-11-06 16:42 ` [PATCH v5 12/48] mfd: ab8500-sysctrl: Register with kernel power-off handler Guenter Roeck
2014-11-06 16:43 ` [PATCH v5 35/48] arm: " Guenter Roeck
2014-11-06 16:43 ` [PATCH v5 36/48] arm64: psci: " Guenter Roeck
2014-11-06 17:22   ` Mark Rutland
2014-11-06 18:51     ` Guenter Roeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).