From: b.galvani@gmail.com (Beniamino Galvani)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/3] i2c: add driver for Amlogic Meson I2C controller
Date: Thu, 13 Nov 2014 20:32:00 +0100 [thread overview]
Message-ID: <1415907123-4318-1-git-send-email-b.galvani@gmail.com> (raw)
Hi,
this patchset adds a driver for the I2C controller available in
Amlogic Meson SoCs. It has been tested on a Meson8 based board with
the following devices:
- Ricoh RN5T618 PMIC
- NXP PCF8564 RTC
Changes since v2:
- fixed token generation for split reads
- simplified meson_i2c_prepare_xfer()
- added DTS patch
Changes since v1:
- factored common code for token list setup
Beniamino Galvani (3):
i2c: meson: add device tree bindings documentation
i2c: add support for Amlogic Meson I2C controller
ARM: dts: meson: add I2C controller nodes
.../devicetree/bindings/i2c/i2c-meson.txt | 24 +
arch/arm/boot/dts/meson.dtsi | 30 ++
drivers/i2c/busses/Kconfig | 7 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-meson.c | 492 +++++++++++++++++++++
5 files changed, 554 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-meson.txt
create mode 100644 drivers/i2c/busses/i2c-meson.c
--
1.9.1
next reply other threads:[~2014-11-13 19:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-13 19:32 Beniamino Galvani [this message]
2014-11-13 19:32 ` [PATCH v3 1/3] i2c: meson: add device tree bindings documentation Beniamino Galvani
2014-11-18 15:17 ` Wolfram Sang
2014-11-13 19:32 ` [PATCH v3 2/3] i2c: add support for Amlogic Meson I2C controller Beniamino Galvani
2014-11-18 15:17 ` Wolfram Sang
2014-11-13 19:32 ` [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes Beniamino Galvani
2014-11-18 15:19 ` Wolfram Sang
2014-11-18 15:29 ` Carlo Caione
2014-11-18 20:32 ` Beniamino Galvani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415907123-4318-1-git-send-email-b.galvani@gmail.com \
--to=b.galvani@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).