From mboxrd@z Thu Jan 1 00:00:00 1970 From: peter.griffin@linaro.org (Peter Griffin) Date: Wed, 19 Nov 2014 08:27:09 +0000 Subject: [PATCH 4/7] ARM: STi: DT: STiH410: Add usb2 picophy dt nodes In-Reply-To: <1416385632-5832-1-git-send-email-peter.griffin@linaro.org> References: <1416385632-5832-1-git-send-email-peter.griffin@linaro.org> Message-ID: <1416385632-5832-5-git-send-email-peter.griffin@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds the dt nodes for the extra usb2 picophys found on the stih410. These two picophys are used in conjunction with the extra ehci/ohci usb controllers also found on the stih410. Signed-off-by: Peter Griffin --- arch/arm/boot/dts/stih410.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index c05627e..7fd9d57 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -10,5 +10,23 @@ #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" / { + soc { + usb2_picophy1: phy at 1 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xf8 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY0_RESET>; + reset-names = "global", "port"; + }; + usb2_picophy2: phy at 2 { + compatible = "st,stih407-usb2-phy"; + #phy-cells = <0>; + st,syscfg = <&syscfg_core 0xfc 0xf4>; + resets = <&softreset STIH407_PICOPHY_SOFTRESET>, + <&picophyreset STIH407_PICOPHY1_RESET>; + reset-names = "global", "port"; + }; + }; }; -- 1.9.1