From mboxrd@z Thu Jan 1 00:00:00 1970 From: b.galvani@gmail.com (Beniamino Galvani) Date: Sat, 22 Nov 2014 16:21:40 +0100 Subject: [PATCH v3 2/4] spi: meson: Add device tree bindings documentation for SPIFC In-Reply-To: <1416669702-7841-1-git-send-email-b.galvani@gmail.com> References: <1416669702-7841-1-git-send-email-b.galvani@gmail.com> Message-ID: <1416669702-7841-3-git-send-email-b.galvani@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This adds documentation of device tree bindings for the Amlogic Meson SPIFC (SPI Flash Controller). Signed-off-by: Beniamino Galvani --- .../devicetree/bindings/spi/spi-meson.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-meson.txt diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt new file mode 100644 index 0000000..bb52a86 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-meson.txt @@ -0,0 +1,22 @@ +Amlogic Meson SPI controllers + +* SPIFC (SPI Flash Controller) + +The Meson SPIFC is a controller optimized for communication with SPI +NOR memories, without DMA support and a 64-byte unified transmit / +receive buffer. + +Required properties: + - compatible: should be "amlogic,meson6-spifc" + - reg: physical base address and length of the controller registers + - clocks: phandle of the input clock for the baud rate generator + - #address-cells: should be 1 + - #size-cells: should be 0 + + spi at c1108c80 { + compatible = "amlogic,meson6-spifc"; + reg = <0xc1108c80 0x80>; + clocks = <&clk81>; + #address-cells = <1>; + #size-cells = <0>; + }; -- 1.9.1