From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/8] qcom audio clock control drivers
Date: Tue, 25 Nov 2014 17:35:27 -0800 [thread overview]
Message-ID: <1416965735-10583-1-git-send-email-sboyd@codeaurora.org> (raw)
This patchset adds support for the low power audio subsystem (LPASS)
clock controller hardware. I split out the #define patch for IPQ so that
it can go through the clock tree and the arm-soc tree in parallel
if desired. New in this version is the msm8960/apq8064 support.
Change since v1:
* Renamed clk-cdiv to clk-regmap-divider
* Added msm8960/apq8064 support
* Split out dividers and branches to check for halt bits
Josh Cartwright (1):
clk: qcom: Add support for regmap divider clocks
Rajendra Nayak (3):
dt-bindings: Add #defines for IPQ806x lpass clock control
clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver
devicetree: bindings: Document qcom,lcc
Stephen Boyd (4):
clk: Add __clk_mux_determine_rate_closest
clk: divider: Make generic for usage elsewhere
clk: qcom: Add simple regmap based muxes
clk: qcom: Add MSM8960/APQ8064 LPASS clock controller (LCC) driver
.../devicetree/bindings/clock/qcom,lcc.txt | 21 +
drivers/clk/clk-divider.c | 195 ++++---
drivers/clk/clk.c | 47 +-
drivers/clk/qcom/Kconfig | 18 +
drivers/clk/qcom/Makefile | 4 +
drivers/clk/qcom/clk-regmap-divider.c | 70 +++
drivers/clk/qcom/clk-regmap-divider.h | 29 +
drivers/clk/qcom/clk-regmap-mux.c | 59 +++
drivers/clk/qcom/clk-regmap-mux.h | 29 +
drivers/clk/qcom/gcc-ipq806x.c | 12 +
drivers/clk/qcom/lcc-ipq806x.c | 473 +++++++++++++++++
drivers/clk/qcom/lcc-msm8960.c | 585 +++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-ipq806x.h | 1 -
include/dt-bindings/clock/qcom,lcc-ipq806x.h | 30 ++
include/dt-bindings/clock/qcom,lcc-msm8960.h | 50 ++
include/linux/clk-provider.h | 20 +-
16 files changed, 1555 insertions(+), 88 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,lcc.txt
create mode 100644 drivers/clk/qcom/clk-regmap-divider.c
create mode 100644 drivers/clk/qcom/clk-regmap-divider.h
create mode 100644 drivers/clk/qcom/clk-regmap-mux.c
create mode 100644 drivers/clk/qcom/clk-regmap-mux.h
create mode 100644 drivers/clk/qcom/lcc-ipq806x.c
create mode 100644 drivers/clk/qcom/lcc-msm8960.c
create mode 100644 include/dt-bindings/clock/qcom,lcc-ipq806x.h
create mode 100644 include/dt-bindings/clock/qcom,lcc-msm8960.h
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2014-11-26 1:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-26 1:35 Stephen Boyd [this message]
2014-11-26 1:35 ` [PATCH v2 1/8] clk: Add __clk_mux_determine_rate_closest Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 2/8] clk: divider: Make generic for usage elsewhere Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 3/8] clk: qcom: Add support for regmap divider clocks Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 4/8] clk: qcom: Add simple regmap based muxes Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 5/8] dt-bindings: Add #defines for IPQ806x lpass clock control Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 6/8] clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver Stephen Boyd
2014-12-04 1:05 ` Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 7/8] clk: qcom: Add MSM8960/APQ8064 " Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 8/8] devicetree: bindings: Document qcom,lcc Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416965735-10583-1-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).