From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/8] clk: Add __clk_mux_determine_rate_closest
Date: Tue, 25 Nov 2014 17:35:28 -0800 [thread overview]
Message-ID: <1416965735-10583-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1416965735-10583-1-git-send-email-sboyd@codeaurora.org>
Some clock drivers want to find the closest rate on the input of
a mux instead of a rate that's less than or equal to the desired
rate. Add a generic mux function to support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/clk.c | 47 +++++++++++++++++++++++++++++++++++---------
include/linux/clk-provider.h | 9 +++++++--
2 files changed, 45 insertions(+), 11 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 4896ae9e23da..675f37a7329f 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -700,14 +700,20 @@ struct clk *__clk_lookup(const char *name)
return NULL;
}
-/*
- * Helper for finding best parent to provide a given frequency. This can be used
- * directly as a determine_rate callback (e.g. for a mux), or from a more
- * complex clock that may combine a mux with other operations.
- */
-long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *best_parent_rate,
- struct clk **best_parent_p)
+static bool mux_is_better_rate(unsigned long rate, unsigned long now,
+ unsigned long best, unsigned long flags)
+{
+ if (flags & CLK_MUX_ROUND_CLOSEST)
+ return abs(now - rate) < abs(best - rate);
+
+ return now <= rate && now > best;
+}
+
+static long
+clk_mux_determine_rate_flags(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p,
+ unsigned long flags)
{
struct clk *clk = hw->clk, *parent, *best_parent = NULL;
int i, num_parents;
@@ -735,7 +741,7 @@ long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
parent_rate = __clk_round_rate(parent, rate);
else
parent_rate = __clk_get_rate(parent);
- if (parent_rate <= rate && parent_rate > best) {
+ if (mux_is_better_rate(rate, parent_rate, best, flags)) {
best_parent = parent;
best = parent_rate;
}
@@ -748,8 +754,31 @@ out:
return best;
}
+
+/*
+ * Helper for finding best parent to provide a given frequency. This can be used
+ * directly as a determine_rate callback (e.g. for a mux), or from a more
+ * complex clock that may combine a mux with other operations.
+ */
+long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p)
+{
+ return clk_mux_determine_rate_flags(hw, rate, best_parent_rate,
+ best_parent_p, 0);
+}
EXPORT_SYMBOL_GPL(__clk_mux_determine_rate);
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p)
+{
+ return clk_mux_determine_rate_flags(hw, rate, best_parent_rate,
+ best_parent_p,
+ CLK_MUX_ROUND_CLOSEST);
+}
+EXPORT_SYMBOL_GPL(__clk_mux_determine_rate_closest);
+
/*** clk api ***/
void __clk_unprepare(struct clk *clk)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index be21af149f11..446faed3f79f 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -383,6 +383,8 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
* register, and mask of mux bits are in higher 16-bit of this register.
* While setting the mux bits, higher 16-bit should also be updated to
* indicate changing mux bits.
+ * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
+ * frequency.
*/
struct clk_mux {
struct clk_hw hw;
@@ -397,7 +399,8 @@ struct clk_mux {
#define CLK_MUX_INDEX_ONE BIT(0)
#define CLK_MUX_INDEX_BIT BIT(1)
#define CLK_MUX_HIWORD_MASK BIT(2)
-#define CLK_MUX_READ_ONLY BIT(3) /* mux setting cannot be changed */
+#define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */
+#define CLK_MUX_ROUND_CLOSEST BIT(4)
extern const struct clk_ops clk_mux_ops;
extern const struct clk_ops clk_mux_ro_ops;
@@ -555,7 +558,9 @@ struct clk *__clk_lookup(const char *name);
long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *best_parent_rate,
struct clk **best_parent_p);
-
+long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_p);
/*
* FIXME clock api without lock protection
*/
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2014-11-26 1:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-26 1:35 [PATCH v2 0/8] qcom audio clock control drivers Stephen Boyd
2014-11-26 1:35 ` Stephen Boyd [this message]
2014-11-26 1:35 ` [PATCH v2 2/8] clk: divider: Make generic for usage elsewhere Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 3/8] clk: qcom: Add support for regmap divider clocks Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 4/8] clk: qcom: Add simple regmap based muxes Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 5/8] dt-bindings: Add #defines for IPQ806x lpass clock control Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 6/8] clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver Stephen Boyd
2014-12-04 1:05 ` Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 7/8] clk: qcom: Add MSM8960/APQ8064 " Stephen Boyd
2014-11-26 1:35 ` [PATCH v2 8/8] devicetree: bindings: Document qcom,lcc Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416965735-10583-2-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).