From mboxrd@z Thu Jan 1 00:00:00 1970 From: lina.iyer@linaro.org (Lina Iyer) Date: Wed, 26 Nov 2014 22:24:13 -0700 Subject: [PATCH v13 09/10] arm: dts: qcom: Add idle states device nodes for 8084 In-Reply-To: <1417065854-37745-1-git-send-email-lina.iyer@linaro.org> References: <1417065854-37745-1-git-send-email-lina.iyer@linaro.org> Message-ID: <1417065854-37745-10-git-send-email-lina.iyer@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add ARM common idle states device bindings for cpuidle support for APQ 8084. Support standby and standalone power collapse (power down that does not affect any SoC idle states) for each cpu. Signed-off-by: Lina Iyer Reviewed-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8084.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 71182bf..7172edf 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -22,6 +22,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu at 1 { @@ -32,6 +33,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu at 2 { @@ -42,6 +44,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; cpu at 3 { @@ -52,6 +55,7 @@ next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_STBY &CPU_SPC>; }; L2: l2-cache { @@ -59,6 +63,22 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_STBY: standby { + compatible = "qcom,idle-state-stby", "arm,idle-state"; + entry-latency-us = <1>; + exit-latency-us = <1>; + min-residency-us = <2>; + }; + + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu { -- 2.1.0