From mboxrd@z Thu Jan 1 00:00:00 1970 From: lina.iyer@linaro.org (Lina Iyer) Date: Wed, 26 Nov 2014 22:24:10 -0700 Subject: [PATCH v13 06/10] arm: dts: qcom: Update power-controller device node for 8064 Krait CPUs In-Reply-To: <1417065854-37745-1-git-send-email-lina.iyer@linaro.org> References: <1417065854-37745-1-git-send-email-lina.iyer@linaro.org> Message-ID: <1417065854-37745-7-git-send-email-lina.iyer@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Update the SAW2 DT bindings to add qcom,apq8064-saw2-v1.1-cpu compatible binding string to configure SPM registers and allow the SPM to put the core in deeper idle states when the core is idle. Signed-off-by: Lina Iyer Reviewed-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8064.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index b3154c0..9fd24bc 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -139,26 +139,26 @@ reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; }; - saw0: regulator at 2089000 { - compatible = "qcom,saw2"; + saw0: power-controller at 2089000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw1: regulator at 2099000 { - compatible = "qcom,saw2"; + saw1: power-controller at 2099000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw2: regulator at 20a9000 { - compatible = "qcom,saw2"; + saw2: power-controller at 20a9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw3: regulator at 20b9000 { - compatible = "qcom,saw2"; + saw3: power-controller at 20b9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; regulator; }; -- 2.1.0