From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 6/8] dma-mapping: detect and configure IOMMU in of_dma_configure
Date: Fri, 28 Nov 2014 13:29:44 +0000 [thread overview]
Message-ID: <1417181386-18142-7-git-send-email-will.deacon@arm.com> (raw)
In-Reply-To: <1417181386-18142-1-git-send-email-will.deacon@arm.com>
This patch extends of_dma_configure so that it sets up the IOMMU for a
device, as well as the coherent/non-coherent DMA mapping ops.
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
---
arch/arm/include/asm/dma-mapping.h | 4 +++-
drivers/of/platform.c | 21 ++++++++++++++-------
include/linux/dma-mapping.h | 8 +++++++-
3 files changed, 24 insertions(+), 9 deletions(-)
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index dc3420e77758..f3c0d953f6a2 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -121,7 +121,9 @@ static inline unsigned long dma_max_pfn(struct device *dev)
}
#define dma_max_pfn(dev) dma_max_pfn(dev)
-static inline void arch_setup_dma_ops(struct device *dev, bool coherent)
+static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
+ u64 size, struct iommu_ops *iommu,
+ bool coherent)
{
if (coherent)
set_dma_ops(dev, &arm_coherent_dma_ops);
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index ff1f4e9afccb..b89caf8c7586 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_iommu.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
@@ -166,6 +167,7 @@ static void of_dma_configure(struct device *dev)
int ret;
bool coherent;
unsigned long offset;
+ struct iommu_ops *iommu;
/*
* Set default dma-mask to 32 bit. Drivers are expected to setup
@@ -194,7 +196,16 @@ static void of_dma_configure(struct device *dev)
dev_dbg(dev, "device is%sdma coherent\n",
coherent ? " " : " not ");
- arch_setup_dma_ops(dev, coherent);
+ iommu = of_iommu_configure(dev);
+ dev_dbg(dev, "device is%sbehind an iommu\n",
+ iommu ? " " : " not ");
+
+ arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent);
+}
+
+static void of_dma_deconfigure(struct device *dev)
+{
+ arch_teardown_dma_ops(dev);
}
/**
@@ -223,16 +234,12 @@ static struct platform_device *of_platform_device_create_pdata(
if (!dev)
goto err_clear_flag;
- of_dma_configure(&dev->dev);
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
-
- /* We do not fill the DMA ops for platform devices by default.
- * This is currently the responsibility of the platform code
- * to do such, possibly using a device notifier
- */
+ of_dma_configure(&dev->dev);
if (of_device_add(dev) != 0) {
+ of_dma_deconfigure(&dev->dev);
platform_device_put(dev);
goto err_clear_flag;
}
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 8a1560f95d4a..c3007cb4bfa6 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -130,7 +130,13 @@ static inline int dma_coerce_mask_and_coherent(struct device *dev, u64 mask)
extern u64 dma_get_required_mask(struct device *dev);
#ifndef arch_setup_dma_ops
-static inline void arch_setup_dma_ops(struct device *dev, bool coherent) { }
+static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base,
+ u64 size, struct iommu_ops *iommu,
+ bool coherent) { }
+#endif
+
+#ifndef arch_teardown_dma_ops
+static inline void arch_teardown_dma_ops(struct device *dev) { }
#endif
static inline unsigned int dma_get_max_seg_size(struct device *dev)
--
2.1.1
next prev parent reply other threads:[~2014-11-28 13:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-28 13:29 [PATCH v5 0/8] Introduce automatic DMA configuration for IOMMU masters Will Deacon
2014-11-28 13:29 ` [PATCH v5 1/8] iommu: provide early initialisation hook for IOMMU drivers Will Deacon
2014-11-28 13:29 ` [PATCH v5 2/8] dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops Will Deacon
2014-11-28 13:29 ` [PATCH v5 3/8] iommu: add new iommu_ops callback for adding an OF device Will Deacon
2014-11-28 13:29 ` [PATCH v5 4/8] iommu: provide helper function to configure an IOMMU for an of master Will Deacon
2014-11-28 13:29 ` [PATCH v5 5/8] iommu: fix initialization without 'add_device' callback Will Deacon
2014-11-28 13:29 ` Will Deacon [this message]
2014-11-28 13:29 ` [PATCH v5 7/8] arm: call iommu_init before of_platform_populate Will Deacon
2014-11-28 13:29 ` [PATCH v5 8/8] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops Will Deacon
2014-12-01 13:52 ` [PATCH v5 0/8] Introduce automatic DMA configuration for IOMMU masters Arnd Bergmann
2014-12-01 15:05 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417181386-18142-7-git-send-email-will.deacon@arm.com \
--to=will.deacon@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).