From: zajec5@gmail.com (Rafał Miłecki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 4/5] ARM: BCM5301X: Add DT for Asus RT-N18U
Date: Thu, 4 Dec 2014 10:23:33 +0100 [thread overview]
Message-ID: <1417685013-1325-1-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1417368513-13808-4-git-send-email-zajec5@gmail.com>
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
V2: Use (C) instad of UTF ?
Use "brcm,bcm4708" compatibility after "brcm,bcm47081"
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 78 +++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm47081.dtsi | 26 ++++++++++
3 files changed, 106 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
create mode 100644 arch/arm/boot/dts/bcm47081.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 18a21d9..db51a31 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -58,7 +58,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-buffalo-wzr-1750dhp.dtb \
bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb
+ bcm4708-netgear-r6300-v2.dtb \
+ bcm47081-asus-rt-n18u.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
bcm911360k.dtb \
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
new file mode 100644
index 0000000..fb76378
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -0,0 +1,78 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-N18U
+ *
+ * Copyright (C) 2014 Rafa? Mi?ecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Asus RT-N18U (BCM47081)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:blue:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb2 {
+ label = "bcm53xx:blue:usb2";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:blue:wan";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan {
+ label = "bcm53xx:blue:lan";
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb3 {
+ label = "bcm53xx:blue:usb3";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <200>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
new file mode 100644
index 0000000..f720012
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -0,0 +1,26 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM47081 SoC.
+ *
+ * Copyright ? 2014 Rafa? Mi?ecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+ compatible = "brcm,bcm47081";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+};
--
1.8.4.5
next prev parent reply other threads:[~2014-12-04 9:23 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-30 17:28 [PATCH 1/5] ARM: BCM5301X: Add buttons for Netgear R6250 Rafał Miłecki
2014-11-30 17:28 ` [PATCH 2/5] ARM: BCM5301X: Add DT for Netgear R6300 V2 Rafał Miłecki
2014-12-02 23:15 ` Hauke Mehrtens
2014-12-03 5:59 ` Rafał Miłecki
2014-12-03 8:40 ` Hauke Mehrtens
2014-12-03 10:25 ` Arnd Bergmann
2014-12-04 9:22 ` [PATCH V2 " Rafał Miłecki
2014-11-30 17:28 ` [PATCH 3/5] ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP Rafał Miłecki
2014-12-04 9:22 ` [PATCH V2 " Rafał Miłecki
2014-11-30 17:28 ` [PATCH 4/5] ARM: BCM5301X: Add DT for Asus RT-N18U Rafał Miłecki
2014-12-02 23:19 ` Hauke Mehrtens
2014-12-03 5:40 ` Rafał Miłecki
2014-12-03 6:01 ` Rafał Miłecki
2014-12-03 7:50 ` Uwe Kleine-König
2014-12-03 8:34 ` Hauke Mehrtens
2014-12-04 9:12 ` Rafał Miłecki
2014-12-04 9:23 ` Rafał Miłecki [this message]
2014-11-30 17:28 ` [PATCH 5/5] ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 Rafał Miłecki
2014-12-04 9:24 ` [PATCH V2 " Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417685013-1325-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).