From: flora.fu@mediatek.com (Flora Fu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/8] dt-bindings: Add document for MT6397 MFD
Date: Fri, 5 Dec 2014 12:07:56 +0800 [thread overview]
Message-ID: <1417752479-4749-6-git-send-email-flora.fu@mediatek.com> (raw)
In-Reply-To: <1417752479-4749-1-git-send-email-flora.fu@mediatek.com>
Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
Documentation/devicetree/bindings/mfd/mt6397.txt | 75 ++++++++++++++++++++++++
1 file changed, 75 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mt6397.txt
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
new file mode 100644
index 0000000..64ef408
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -0,0 +1,75 @@
+MediaTek MT6397 Multifunction Device Driver
+
+MT6397 is a multifunction device with the following sub modules:
+- Regulator
+- RTC
+- Audio codec
+- GPIO
+- Clock
+
+It is interfaced to host controller using SPI interface by a proprietary hardware
+called PMIC wrapper or pwrap. MT6397 MFD is a child device of pwrap.
+See the following for pwarp node definitions:
+Documentation/devicetree/bindings/soc/mediatek,mt8135-pwrap.txt
+
+This document describes the binding for mfd device and its sub module.
+
+Required properties:
+compatible: "mediatek,mt6397"
+
+Optional properties:
+- codec: Audio codec
+- pinctrl: GPIO in mt6397
+- rtc: RTC
+- clock: clocks in mt6397
+- regulators: regulators in mt6397
+
+Example:
+ pwrap: pwrap at 1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap-base", "pwrap-bridge-base";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infrarst MT8135_INFRA_PMIC_WRAP_RST>,
+ <&perirst MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "infra-pwrap-rst",
+ "peri-pwrap-bridge-rst";
+ clocks = <&pmicspi_sel>, <&clk26m>;
+ clock-names = "pmicspi-sel", "pmicspi-parent";
+
+ pmic {
+ compatible = "mediatek,mt6397";
+
+ codec: mt6397codec {
+ compatible = "mediatek,mt6397-codec";
+ };
+
+ pinctrl at 0x0000C000 {
+ compatible = "mediatek,mt6397-pinctrl";
+ reg = <0 0x0000C000 0 0x0108>;
+ gpio-controller;
+ };
+
+ mt6397regulator: mt6397regulator {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
+ };
--
1.8.1.1.dirty
next prev parent reply other threads:[~2014-12-05 4:07 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 4:07 [PATCH v3 0/8] Add Support for MediaTek PMIC MT6397 MFD Core and Regulator Flora Fu
2014-12-05 4:07 ` [PATCH v3 1/8] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC Flora Fu
2014-12-05 10:13 ` Arnd Bergmann
2014-12-09 2:15 ` Flora Fu
2014-12-09 8:23 ` Arnd Bergmann
2014-12-09 10:13 ` Sascha Hauer
2014-12-09 10:30 ` Matthias Brugger
2014-12-09 11:20 ` Arnd Bergmann
2014-12-11 10:04 ` Flora Fu
2014-12-14 20:18 ` Arnd Bergmann
2014-12-15 17:22 ` Mark Brown
2014-12-05 4:07 ` [PATCH v3 2/8] mfd: MT6397: Add support for PMIC MT6397 MFD Flora Fu
2014-12-08 8:46 ` Lee Jones
2014-12-05 4:07 ` [PATCH v3 3/8] regulator: MT6397: Add support for MT6397 regulator Flora Fu
2014-12-24 12:41 ` Mark Brown
2014-12-05 4:07 ` [PATCH v3 4/8] dt-bindings:: Add document for MT8135 PMIC Wrapper Flora Fu
2014-12-05 4:07 ` Flora Fu [this message]
2014-12-05 4:07 ` [PATCH v3 6/8] dt-bindings: Add document for MT6397 regulator Flora Fu
2014-12-24 12:41 ` Mark Brown
2014-12-05 4:07 ` [PATCH v3 7/8] ARM: dts: mt8135: Add support for MT8135 PMIC wrapper Flora Fu
2014-12-05 4:07 ` [PATCH v3 8/8] ARM: dts: mt8135: Add support for MT6397 MFD and regulator Flora Fu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417752479-4749-6-git-send-email-flora.fu@mediatek.com \
--to=flora.fu@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).