From mboxrd@z Thu Jan 1 00:00:00 1970 From: fabio.estevam@freescale.com (Fabio Estevam) Date: Tue, 16 Dec 2014 11:02:41 -0200 Subject: [PATCH v2] ARM: dts: imx6qdl: Remove OCRAM clock from VPU node Message-ID: <1418734961-4972-1-git-send-email-fabio.estevam@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org According to Documentation/devicetree/bindings/media/coda.txt: - clock-names : Should be "ahb", "per" The OCRAM clock is already provided inside the ocram node, so remove the OCRAM clock from the VPU node. Signed-off-by: Fabio Estevam --- Changes since v1: - Rebased against the latest imx/dt branch from Shawn arch/arm/boot/dts/imx6qdl.dtsi | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4fc03b7..f6c6a6e 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -339,9 +339,8 @@ <0 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bit", "jpeg"; clocks = <&clks IMX6QDL_CLK_VPU_AXI>, - <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, - <&clks IMX6QDL_CLK_OCRAM>; - clock-names = "per", "ahb", "ocram"; + <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; + clock-names = "per", "ahb"; resets = <&src 1>; iram = <&ocram>; }; -- 1.9.1