linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 02/11] ARM: dts: sun9i: Add mmc module clock nodes for A80
Date: Thu, 18 Dec 2014 15:00:49 +0800	[thread overview]
Message-ID: <1418886058-8145-3-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1418886058-8145-1-git-send-email-wens@csie.org>

The mmc module clocks are A80 specific module 0 (storage) type clocks.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 494714f..b595d9e 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -215,6 +215,42 @@
 			clock-output-names = "cci400";
 		};
 
+		mmc0_clk: clk at 06000410 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000410 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc0", "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk at 06000414 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000414 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc1", "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk at 06000418 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000418 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc2", "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk at 0600041c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x0600041c 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc3", "mmc3_output",
+					     "mmc3_sample";
+		};
+
 		ahb0_gates: clk at 06000580 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
-- 
2.1.3

  parent reply	other threads:[~2014-12-18  7:00 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-18  7:00 [PATCH v2 00/11] ARM: sun9i: Enable MMC support on Allwinner A80 Chen-Yu Tsai
2014-12-18  7:00 ` [PATCH v2 01/11] clk: sunxi: Add mod0 and mmc module clock support for A80 Chen-Yu Tsai
2014-12-19 18:02   ` Maxime Ripard
2014-12-20 12:43     ` Chen-Yu Tsai
2015-01-08  9:38       ` Maxime Ripard
2015-01-12  2:39         ` [linux-sunxi] " Chen-Yu Tsai
2015-01-12  2:54           ` Chen-Yu Tsai
2015-01-12 15:19           ` Maxime Ripard
2014-12-18  7:00 ` Chen-Yu Tsai [this message]
2014-12-18  7:00 ` [PATCH v2 03/11] clk: sunxi: Add driver for A80 MMC config clocks/resets Chen-Yu Tsai
2014-12-19 18:08   ` Maxime Ripard
2014-12-22  2:15     ` Chen-Yu Tsai
2015-01-08  9:39       ` Maxime Ripard
2014-12-18  7:00 ` [PATCH v2 04/11] ARM: dts: sun9i: Add clock-indices property for bus gate clocks Chen-Yu Tsai
2014-12-18  7:00 ` [PATCH v2 05/11] ARM: dts: sun9i: Add mmc config clock nodes Chen-Yu Tsai
2014-12-18  7:00 ` [PATCH v2 06/11] ARM: dts: sunxi: Use label to reference pio in sunxi-common-regulators Chen-Yu Tsai
2014-12-18  7:00 ` [PATCH v2 07/11] ARM: dts: sun9i: Add mmc controller nodes to the A80 dtsi Chen-Yu Tsai
2014-12-18  7:00 ` [PATCH v2 08/11] ARM: dts: sun9i: Add pinmux setting for mmc0 Chen-Yu Tsai
2014-12-18  7:00 ` [PATCH v2 09/11] ARM: dts: sun9i: Enable mmc0 on A80 Optimus Board Chen-Yu Tsai
2014-12-18  7:00 ` [PATCH v2 10/11] ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2 Chen-Yu Tsai
2014-12-18  7:00 ` [PATCH v2 11/11] ARM: dts: sun9i: Enable mmc2 on A80 Optimus Board Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1418886058-8145-3-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).