From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/11] ARM: dts: sun9i: Add mmc controller nodes to the A80 dtsi
Date: Thu, 18 Dec 2014 15:00:54 +0800 [thread overview]
Message-ID: <1418886058-8145-8-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1418886058-8145-1-git-send-email-wens@csie.org>
The A80 has 4 mmc controllers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 48 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index cd09de2..87198b1 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -329,6 +329,54 @@
*/
ranges = <0 0 0 0x20000000>;
+ mmc0: mmc at 01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
+ <&mmc0_clk 1>, <&mmc0_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 0>;
+ reset-names = "ahb";
+ interrupts = <0 60 4>;
+ status = "disabled";
+ };
+
+ mmc1: mmc at 01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
+ <&mmc1_clk 1>, <&mmc1_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 1>;
+ reset-names = "ahb";
+ interrupts = <0 61 4>;
+ status = "disabled";
+ };
+
+ mmc2: mmc at 01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
+ <&mmc2_clk 1>, <&mmc2_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 2>;
+ reset-names = "ahb";
+ interrupts = <0 62 4>;
+ status = "disabled";
+ };
+
+ mmc3: mmc at 01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
+ <&mmc3_clk 1>, <&mmc3_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 3>;
+ reset-names = "ahb";
+ interrupts = <0 63 4>;
+ status = "disabled";
+ };
+
mmc_config_clk: clk at 01c13000 {
compatible = "allwinner,sun9i-a80-mmc-config-clk";
reg = <0x01c13000 0x10>;
--
2.1.3
next prev parent reply other threads:[~2014-12-18 7:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-18 7:00 [PATCH v2 00/11] ARM: sun9i: Enable MMC support on Allwinner A80 Chen-Yu Tsai
2014-12-18 7:00 ` [PATCH v2 01/11] clk: sunxi: Add mod0 and mmc module clock support for A80 Chen-Yu Tsai
2014-12-19 18:02 ` Maxime Ripard
2014-12-20 12:43 ` Chen-Yu Tsai
2015-01-08 9:38 ` Maxime Ripard
2015-01-12 2:39 ` [linux-sunxi] " Chen-Yu Tsai
2015-01-12 2:54 ` Chen-Yu Tsai
2015-01-12 15:19 ` Maxime Ripard
2014-12-18 7:00 ` [PATCH v2 02/11] ARM: dts: sun9i: Add mmc module clock nodes " Chen-Yu Tsai
2014-12-18 7:00 ` [PATCH v2 03/11] clk: sunxi: Add driver for A80 MMC config clocks/resets Chen-Yu Tsai
2014-12-19 18:08 ` Maxime Ripard
2014-12-22 2:15 ` Chen-Yu Tsai
2015-01-08 9:39 ` Maxime Ripard
2014-12-18 7:00 ` [PATCH v2 04/11] ARM: dts: sun9i: Add clock-indices property for bus gate clocks Chen-Yu Tsai
2014-12-18 7:00 ` [PATCH v2 05/11] ARM: dts: sun9i: Add mmc config clock nodes Chen-Yu Tsai
2014-12-18 7:00 ` [PATCH v2 06/11] ARM: dts: sunxi: Use label to reference pio in sunxi-common-regulators Chen-Yu Tsai
2014-12-18 7:00 ` Chen-Yu Tsai [this message]
2014-12-18 7:00 ` [PATCH v2 08/11] ARM: dts: sun9i: Add pinmux setting for mmc0 Chen-Yu Tsai
2014-12-18 7:00 ` [PATCH v2 09/11] ARM: dts: sun9i: Enable mmc0 on A80 Optimus Board Chen-Yu Tsai
2014-12-18 7:00 ` [PATCH v2 10/11] ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2 Chen-Yu Tsai
2014-12-18 7:00 ` [PATCH v2 11/11] ARM: dts: sun9i: Enable mmc2 on A80 Optimus Board Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418886058-8145-8-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).