From mboxrd@z Thu Jan 1 00:00:00 1970 From: jszhang@marvell.com (Jisheng Zhang) Date: Fri, 26 Dec 2014 16:58:01 +0800 Subject: [PATCH v2 3/3] ARM: dts: berlin: correct BG2Q's SM GPIO location. In-Reply-To: <1419584281-4811-1-git-send-email-jszhang@marvell.com> References: <1419584281-4811-1-git-send-email-jszhang@marvell.com> Message-ID: <1419584281-4811-4-git-send-email-jszhang@marvell.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The gpio4 and gpio5 are in 0xf7fc0000 apb which is located in the SM domain. This patch moves gpio4 and gpio5 to the correct location. This patch also renames them as the following to match the names we internally used in marvell: gpio4 -> sm_gpio1 gpio5 -> sm_gpio0 porte -> portf portf -> porte This also matches what we did for BG2 and BG2CD's SM GPIO. Signed-off-by: Jisheng Zhang --- arch/arm/boot/dts/berlin2q.dtsi | 60 ++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 41a683f..f0ddbec 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -356,36 +356,6 @@ interrupt-parent = <&gic>; interrupts = ; }; - - gpio4: gpio at 5000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x5000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porte: gpio-port at 4 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; - - gpio5: gpio at c000 { - compatible = "snps,dw-apb-gpio"; - reg = <0xc000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portf: gpio-port at 5 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; }; chip: chip-control at ea0000 { @@ -474,6 +444,21 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio at 5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port at 5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + i2c2: i2c at 7000 { compatible = "snps,designware-i2c"; #address-cells = <1>; @@ -524,6 +509,21 @@ status = "disabled"; }; + sm_gpio0: gpio at c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port at 4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + sysctrl: pin-controller at d000 { compatible = "marvell,berlin2q-system-ctrl"; reg = <0xd000 0x100>; -- 2.1.4