linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jingchang.lu@freescale.com (Jingchang Lu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] dmaengine: fsl-edma: add dma memcpy support
Date: Tue, 30 Dec 2014 16:41:46 +0800	[thread overview]
Message-ID: <1419928907-18053-2-git-send-email-jingchang.lu@freescale.com> (raw)
In-Reply-To: <1419928907-18053-1-git-send-email-jingchang.lu@freescale.com>

This adds the memory copy capability support, the memcpy
functionality needs to configure the DMAMUX of the channel
with the always on slave id.

Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
---
 drivers/dma/fsl-edma.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 61 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c
index 09e2842..e0bd517 100644
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -110,6 +110,8 @@
 #define EDMAMUX_CHCFG_ENBL		0x80
 #define EDMAMUX_CHCFG_SOURCE(n)		((n) & 0x3F)
 
+#define SLAVE_ID_ALWAYSON	63 /* the always on slave id */
+
 #define DMAMUX_NR	2
 
 #define FSL_EDMA_BUSWIDTHS	BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
@@ -147,6 +149,7 @@ struct fsl_edma_slave_config {
 struct fsl_edma_chan {
 	struct virt_dma_chan		vchan;
 	enum dma_status			status;
+	u32				slave_id;
 	struct fsl_edma_engine		*edma;
 	struct fsl_edma_desc		*edesc;
 	struct fsl_edma_slave_config	fsc;
@@ -637,6 +640,45 @@ static struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
 	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
 }
 
+static struct dma_async_tx_descriptor *
+fsl_edma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst,
+			dma_addr_t src, size_t len, unsigned long tx_flags)
+{
+	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+	struct fsl_edma_desc *fsl_desc;
+	u16 soff, doff, attr;
+
+	/*
+	 * use 4-bytes data transfer size if all is 4-bytes aligned,
+	 * else 2-bytes data transfer size of all is 2-bytes aligned,
+	 * otherwise 1-byte tranfer size.
+	 */
+	if (src & 0x1 || dst & 0x1 || len & 0x1) {
+		attr = EDMA_TCD_ATTR_SSIZE_8BIT | EDMA_TCD_ATTR_DSIZE_8BIT;
+		soff = 0x1;
+		doff = 0x1;
+	} else if (src & 0x2 || dst & 0x2 || len & 0x2) {
+		attr = EDMA_TCD_ATTR_SSIZE_16BIT | EDMA_TCD_ATTR_DSIZE_16BIT;
+		soff = 0x2;
+		doff = 0x2;
+	} else {
+		attr = EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
+		soff = 0x4;
+		doff = 0x4;
+	}
+
+	fsl_desc = fsl_edma_alloc_desc(fsl_chan, 1);
+	if (!fsl_desc)
+		return NULL;
+	fsl_desc->iscyclic = false;
+
+	fsl_edma_fill_tcd(fsl_desc->tcd[0].vtcd, src, dst, attr, soff, len,
+			  0, 1, 1, doff, 0, true, true, false);
+
+	return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, tx_flags);
+
+}
+
 static void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan)
 {
 	struct virt_dma_desc *vdesc;
@@ -735,6 +777,7 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
 {
 	struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data;
 	struct dma_chan *chan, *_chan;
+	struct fsl_edma_chan *fsl_chan;
 	unsigned long chans_per_mux = fsl_edma->n_chans / DMAMUX_NR;
 
 	if (dma_spec->args_count != 2)
@@ -748,8 +791,10 @@ static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
 			chan = dma_get_slave_channel(chan);
 			if (chan) {
 				chan->device->privatecnt++;
-				fsl_edma_chan_mux(to_fsl_edma_chan(chan),
-					dma_spec->args[1], true);
+				fsl_chan = to_fsl_edma_chan(chan);
+				fsl_chan->slave_id = dma_spec->args[1];
+				fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id,
+						  true);
 				mutex_unlock(&fsl_edma->fsl_edma_mutex);
 				return chan;
 			}
@@ -763,6 +808,17 @@ static int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
 
+	/*
+	 * If the slave id of the channel DMAMUX is not set yet,
+	 * this could happy when the channel is requested by the
+	 * dma_request_channel() for memory copy purpose instead
+	 * of by dts binding, then configure the DMAMUX with the
+	 * always on slave id.
+	 */
+	if (fsl_chan->slave_id == 0) {
+		fsl_chan->slave_id = SLAVE_ID_ALWAYSON;
+		fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, true);
+	}
 	fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
 				sizeof(struct fsl_edma_hw_tcd),
 				32, 0);
@@ -778,6 +834,7 @@ static void fsl_edma_free_chan_resources(struct dma_chan *chan)
 	spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
 	fsl_edma_disable_request(fsl_chan);
 	fsl_edma_chan_mux(fsl_chan, 0, false);
+	fsl_chan->slave_id = 0;
 	fsl_chan->edesc = NULL;
 	vchan_get_all_descriptors(&fsl_chan->vchan, &head);
 	spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
@@ -903,6 +960,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 	dma_cap_set(DMA_PRIVATE, fsl_edma->dma_dev.cap_mask);
 	dma_cap_set(DMA_SLAVE, fsl_edma->dma_dev.cap_mask);
 	dma_cap_set(DMA_CYCLIC, fsl_edma->dma_dev.cap_mask);
+	dma_cap_set(DMA_MEMCPY, fsl_edma->dma_dev.cap_mask);
 
 	fsl_edma->dma_dev.dev = &pdev->dev;
 	fsl_edma->dma_dev.device_alloc_chan_resources
@@ -912,6 +970,7 @@ static int fsl_edma_probe(struct platform_device *pdev)
 	fsl_edma->dma_dev.device_tx_status = fsl_edma_tx_status;
 	fsl_edma->dma_dev.device_prep_slave_sg = fsl_edma_prep_slave_sg;
 	fsl_edma->dma_dev.device_prep_dma_cyclic = fsl_edma_prep_dma_cyclic;
+	fsl_edma->dma_dev.device_prep_dma_memcpy = fsl_edma_prep_memcpy;
 	fsl_edma->dma_dev.device_config = fsl_edma_slave_config;
 	fsl_edma->dma_dev.device_pause = fsl_edma_pause;
 	fsl_edma->dma_dev.device_resume = fsl_edma_resume;
-- 
1.8.0

  reply	other threads:[~2014-12-30  8:41 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-30  8:41 [PATCH 0/2] dmaengine: fsl-edma: add dma memcpy and suspend/resume support Jingchang Lu
2014-12-30  8:41 ` Jingchang Lu [this message]
2015-01-14  9:36   ` [PATCH 1/2] dmaengine: fsl-edma: add dma memcpy support Jingchang Lu
2015-01-30  9:00     ` Yao Yuan
2015-01-30 12:39   ` Stefan Agner
2015-02-11  8:06     ` Yao Yuan
2015-03-05 10:39   ` Vinod Koul
2014-12-30  8:41 ` [PATCH 2/2] dmaengine: fsl-edma: add PM suspend/resume support Jingchang Lu
2015-01-30 13:05   ` Stefan Agner
2015-03-05 10:41   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1419928907-18053-2-git-send-email-jingchang.lu@freescale.com \
    --to=jingchang.lu@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).