From: 21cnbao@gmail.com (Barry Song)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 3/9] ARM: sirf: drop MARCO support in reset controller module
Date: Sat, 3 Jan 2015 09:36:41 +0800 [thread overview]
Message-ID: <1420249007-8262-4-git-send-email-21cnbao@gmail.com> (raw)
In-Reply-To: <1420249007-8262-1-git-send-email-21cnbao@gmail.com>
From: Barry Song <Baohua.Song@csr.com>
MARCO will not be supported any more. it has been replaced by CSR
atlas7.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
---
arch/arm/mach-prima2/rstc.c | 41 ++++++++++++-----------------------------
1 file changed, 12 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index e1f1f86..7c251eb 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -34,36 +34,20 @@ static int sirfsoc_reset_module(struct reset_controller_dev *rcdev,
mutex_lock(&rstc_lock);
- if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) {
- /*
- * Writing 1 to this bit resets corresponding block.
- * Writing 0 to this bit de-asserts reset signal of the
- * corresponding block. datasheet doesn't require explicit
- * delay between the set and clear of reset bit. it could
- * be shorter if tests pass.
- */
- writel(readl(sirfsoc_rstc_base +
+ /*
+ * Writing 1 to this bit resets corresponding block.
+ * Writing 0 to this bit de-asserts reset signal of the
+ * corresponding block. datasheet doesn't require explicit
+ * delay between the set and clear of reset bit. it could
+ * be shorter if tests pass.
+ */
+ writel(readl(sirfsoc_rstc_base +
(reset_bit / 32) * 4) | (1 << reset_bit),
- sirfsoc_rstc_base + (reset_bit / 32) * 4);
- msleep(20);
- writel(readl(sirfsoc_rstc_base +
+ sirfsoc_rstc_base + (reset_bit / 32) * 4);
+ msleep(20);
+ writel(readl(sirfsoc_rstc_base +
(reset_bit / 32) * 4) & ~(1 << reset_bit),
- sirfsoc_rstc_base + (reset_bit / 32) * 4);
- } else {
- /*
- * For MARCO and POLO
- * Writing 1 to SET register resets corresponding block.
- * Writing 1 to CLEAR register de-asserts reset signal of the
- * corresponding block.
- * datasheet doesn't require explicit delay between the set and
- * clear of reset bit. it could be shorter if tests pass.
- */
- writel(1 << reset_bit,
- sirfsoc_rstc_base + (reset_bit / 32) * 8);
- msleep(20);
- writel(1 << reset_bit,
- sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
- }
+ sirfsoc_rstc_base + (reset_bit / 32) * 4);
mutex_unlock(&rstc_lock);
@@ -106,7 +90,6 @@ static int sirfsoc_rstc_probe(struct platform_device *pdev)
static const struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
- { .compatible = "sirf,marco-rstc" },
{},
};
--
2.2.1
next prev parent reply other threads:[~2015-01-03 1:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-03 1:36 [PATCH V2 0/9] ARM: sirf: drop CSR marco and add atlas7 platform Barry Song
2015-01-03 1:36 ` [PATCH V2 1/9] ARM: sirf: drop MARCO low-level debug port Barry Song
2015-01-03 1:36 ` [PATCH V2 2/9] ARM: dts: drop MARCO platform DT stuff Barry Song
2015-01-03 1:36 ` Barry Song [this message]
2015-01-03 1:36 ` [PATCH V2 4/9] ARM: sirf: drop MARCO machine Barry Song
2015-01-03 1:36 ` [PATCH V2 5/9] ARM: sirf: move platsmp to support atlas7 SoC Barry Song
2015-01-03 1:36 ` [PATCH V2 6/9] ARM: sirf: add two debug ports for CSRatlas7 SoC Barry Song
2015-01-04 16:55 ` Arnd Bergmann
2015-01-03 1:36 ` [PATCH V2 7/9] ARM: sirf: add atlas7 machine support Barry Song
2015-01-03 1:36 ` [PATCH V2 8/9] ARM: dts: add init dts file for CSR atlas7 SoC Barry Song
2015-01-03 1:36 ` [PATCH V2 9/9] clocksource: marco: rename marco to atlas7 Barry Song
2015-01-04 18:00 ` Daniel Lezcano
2015-01-04 16:56 ` [PATCH V2 0/9] ARM: sirf: drop CSR marco and add atlas7 platform Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420249007-8262-4-git-send-email-21cnbao@gmail.com \
--to=21cnbao@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).