From: 21cnbao@gmail.com (Barry Song)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V3 07/10] ARM: sirf: move to debug_ll_io_init and drop map_io
Date: Sat, 3 Jan 2015 16:27:41 +0800 [thread overview]
Message-ID: <1420273664-10438-8-git-send-email-21cnbao@gmail.com> (raw)
In-Reply-To: <1420273664-10438-1-git-send-email-21cnbao@gmail.com>
From: Barry Song <Baohua.Song@csr.com>
this patch moves to debug_ll_io_init(), then finally drops CSR map_io()
machine callbacks.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-prima2/common.c | 7 -------
arch/arm/mach-prima2/lluart.c | 33 ---------------------------------
2 files changed, 40 deletions(-)
delete mode 100644 arch/arm/mach-prima2/lluart.c
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index a20b8d4..c62ff68 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -20,11 +20,6 @@ static void __init sirfsoc_init_late(void)
sirfsoc_pm_init();
}
-static __init void sirfsoc_map_io(void)
-{
- sirfsoc_map_lluart();
-}
-
#ifdef CONFIG_ARCH_ATLAS6
static const char *atlas6_dt_match[] __initconst = {
"sirf,atlas6",
@@ -35,7 +30,6 @@ DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
- .map_io = sirfsoc_map_io,
.init_late = sirfsoc_init_late,
.dt_compat = atlas6_dt_match,
MACHINE_END
@@ -51,7 +45,6 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
- .map_io = sirfsoc_map_io,
.dma_zone_size = SZ_256M,
.init_late = sirfsoc_init_late,
.dt_compat = prima2_dt_match,
diff --git a/arch/arm/mach-prima2/lluart.c b/arch/arm/mach-prima2/lluart.c
deleted file mode 100644
index 20453c1..0000000
--- a/arch/arm/mach-prima2/lluart.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Static memory mapping for DEBUG_LL
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#include <linux/kernel.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include "common.h"
-
-#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1)
-#define SIRFSOC_UART1_PA_BASE 0xb0060000
-#else
-#define SIRFSOC_UART1_PA_BASE 0
-#endif
-
-#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000)
-#define SIRFSOC_UART1_SIZE SZ_4K
-
-void __init sirfsoc_map_lluart(void)
-{
- struct map_desc sirfsoc_lluart_map = {
- .virtual = SIRFSOC_UART1_VA_BASE,
- .pfn = __phys_to_pfn(SIRFSOC_UART1_PA_BASE),
- .length = SIRFSOC_UART1_SIZE,
- .type = MT_DEVICE,
- };
-
- iotable_init(&sirfsoc_lluart_map, 1);
-}
--
2.2.1
next prev parent reply other threads:[~2015-01-03 8:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-03 8:27 [PATCH V3 00/10] ARM: sirf: drop CSR marco and add atlas7 platform Barry Song
2015-01-03 8:27 ` [PATCH V3 01/10] ARM: sirf: drop MARCO low-level debug port Barry Song
2015-01-03 8:27 ` [PATCH V3 02/10] ARM: dts: drop MARCO platform DT stuff Barry Song
2015-01-03 8:27 ` [PATCH V3 03/10] ARM: sirf: drop MARCO support in reset controller module Barry Song
2015-01-03 8:27 ` [PATCH V3 04/10] ARM: sirf: drop MARCO machine Barry Song
2015-01-03 8:27 ` [PATCH V3 05/10] ARM: sirf: move platsmp to support atlas7 SoC Barry Song
2015-01-03 8:27 ` [PATCH V3 06/10] ARM: sirf: add two debug ports for CSRatlas7 SoC Barry Song
2015-01-03 8:27 ` Barry Song [this message]
2015-01-03 8:27 ` [PATCH V3 08/10] ARM: sirf: add atlas7 machine support Barry Song
2015-01-03 8:27 ` [PATCH V3 09/10] ARM: dts: add init dts file for CSR atlas7 SoC Barry Song
2015-01-03 8:27 ` [PATCH V3 10/10] clocksource: marco: rename marco to atlas7 Barry Song
2015-01-05 15:24 ` [PATCH V3 00/10] ARM: sirf: drop CSR marco and add atlas7 platform Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420273664-10438-8-git-send-email-21cnbao@gmail.com \
--to=21cnbao@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).