From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Tue, 6 Jan 2015 10:35:16 +0800 Subject: [PATCH 06/17] ARM: dts: sun7i: Add cpu clock reference and operating points to dtsi In-Reply-To: <1420511727-8242-1-git-send-email-wens@csie.org> References: <1420511727-8242-1-git-send-email-wens@csie.org> Message-ID: <1420511727-8242-7-git-send-email-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The cpu core is clocked from the "cpu" clock. Add a reference to it in the first cpu node. Also add "cpu0" label to the node. The operating points were taken from the A20 FEX files in the sunxi-boards repository. Not all boards have the same settings. The settings in this patch are the most generic ones. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 01c7133e699c..887b0521bbfb 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -82,10 +82,26 @@ #address-cells = <1>; #size-cells = <0>; - cpu at 0 { + cpu0: cpu at 0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1450000 + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 900000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <7>; }; cpu at 1 { -- 2.1.4