From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 6 Jan 2015 16:28:13 +0100 Subject: [PATCH v2 0/7] ARM: mvebu: Add Armada 385 AP support Message-ID: <1420558100-4700-1-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi everyone, This set of patches add the support for the Armada 385 AP board. It also adds a few clean ups here and there, a few missing pin functions needed for the board, etc. Maxime Changes from v1: - Removed USB3 support. This required some additional patches for the phy and USB drivers that are not really related to this serie. This will be submitted as a separate one. - Removed earlyprintk from the default bootargs - Removed two unneeded ranges - Changed the phy pins node name to mdio - Moved most of the pinctrl nodes to the DTSI - Added a comment to mention why the phy reference clock is needed. - Rebased on top of 3.19-rc1 Maxime Ripard (7): ARM: mvebu: Rename DEBUG_LL to indicate UART index ARM: mvebu: Add UART1 as DEBUG_LL possible target ARM: mvebu: a38x: Fix node names pinctrl: mvebu: a38x: Add UART1 muxing options ARM: mvebu: A38x: Remove redundant pinctrl informations ARM: mvebu: Add a number of pinctrl functions ARM: mvebu: Add Armada 385 Access Point Development Board support arch/arm/Kconfig.debug | 35 ++++++-- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-380.dtsi | 3 +- arch/arm/boot/dts/armada-385-ap.dts | 140 +++++++++++++++++++++++++++++ arch/arm/boot/dts/armada-385-db.dts | 2 +- arch/arm/boot/dts/armada-385-rd.dts | 2 +- arch/arm/boot/dts/armada-385.dtsi | 3 +- arch/arm/boot/dts/armada-38x.dtsi | 44 ++++++++- drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 6 +- 9 files changed, 216 insertions(+), 20 deletions(-) create mode 100644 arch/arm/boot/dts/armada-385-ap.dts -- 2.2.1