From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 6 Jan 2015 16:28:19 +0100 Subject: [PATCH v2 6/7] ARM: mvebu: Add a number of pinctrl functions In-Reply-To: <1420558100-4700-1-git-send-email-maxime.ripard@free-electrons.com> References: <1420558100-4700-1-git-send-email-maxime.ripard@free-electrons.com> Message-ID: <1420558100-4700-7-git-send-email-maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Some pinctrl functions can be shared with all DTS out there, since they are generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid duplication. Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/armada-38x.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 40200084c6c8..98885c58be29 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -195,6 +195,45 @@ pinctrl at 18000 { reg = <0x18000 0x20>; + + ge0_rgmii_pins: ge-rgmii-pins-0 { + marvell,pins = "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11", + "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "ge0"; + }; + + i2c0_pins: i2c-pins-0 { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "i2c0"; + }; + + mdio_pins: mdio-pins { + marvell,pins = "mpp4", "mpp5"; + marvell,function = "ge"; + }; + + ref_clk0_pins: ref-clk-pins-0 { + marvell,pins = "mpp45"; + marvell,function = "ref"; + }; + + spi1_pins: spi-pins-1 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59"; + marvell,function = "spi1"; + }; + + uart0_pins: uart-pins-0 { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "ua0"; + }; + + uart1_pins: uart-pins-1 { + marvell,pins = "mpp19", "mpp20"; + marvell,function = "ua1"; + }; }; gpio0: gpio at 18100 { -- 2.2.1