From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: at91/Documentation: add a README for Atmel SoCs
Date: Fri, 9 Jan 2015 14:20:31 +0100 [thread overview]
Message-ID: <1420809631-26923-1-git-send-email-nicolas.ferre@atmel.com> (raw)
Add a README file to describe Atmel SoCs (aka AT91) support in Mainline Linux:
- SoC list + datasheet web links
- Basic but useful information
- Device Tree conventions and Work In Progress statement.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: ARM Maintainers <arm@kernel.org>
---
Documentation/arm/Atmel/README | 120 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 Documentation/arm/Atmel/README
diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Atmel/README
new file mode 100644
index 000000000000..538f8a556277
--- /dev/null
+++ b/Documentation/arm/Atmel/README
@@ -0,0 +1,120 @@
+ARM Atmel SoCs (aka AT91)
+=========================
+
+
+Introduction
+------------
+This document gives useful information about the ARM Atmel SoCs that are
+currently supported in Linux Mainline (you know, the one on kernel.org).
+
+It is important to note that the Atmel | SMART ARM-based MPU product line is
+historically named "AT91" or "at91" throughout the Linux kernel development
+process even if this product prefix has completely disappeared from the
+official Atmel product name. Anyway, files, directories, git trees,
+git branches/tags and email subject always contain this "at91" sub-string.
+
+
+AT91 SoCs
+---------
+Documentation and detailled datasheet for each product are available on
+the Atmel website: http://www.atmel.com.
+
+ Flavors:
+ * ARM 920 based SoC
+ - at91rm9200
+ + Datasheet
+ http://www.atmel.com/Images/doc1768.pdf
+
+ * ARM 926 based SoCs
+ - at91sam9260
+ + Datasheet
+ http://www.atmel.com/Images/doc6221.pdf
+
+ - at91sam9261
+ + Datasheet
+ http://www.atmel.com/Images/doc6062.pdf
+
+ - at91sam9263
+ + Datasheet
+ http://www.atmel.com/Images/Atmel_6249_32-bit-ARM926EJ-S-Microcontroller_SAM9263_Datasheet.pdf
+
+ - at91sam9rl
+ + Datasheet
+ http://www.atmel.com/Images/doc6289.pdf
+
+ - at91sam9g20
+ + Datasheet
+ http://www.atmel.com/Images/doc6384.pdf
+
+ - at91sam9g45 family
+ - at91sam9g45
+ - at91sam9g46
+ - at91sam9m10
+ - at91sam9m11 (device superset)
+ + Datasheet
+ http://www.atmel.com/Images/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf
+
+ - at91sam9x5 family (aka "The 5 series")
+ - at91sam9g15
+ - at91sam9g25
+ - at91sam9g35
+ - at91sam9x25
+ - at91sam9x35
+ + Datasheet (can be considered as covering the whole family)
+ http://www.atmel.com/Images/Atmel_11055_32-bit-ARM926EJ-S-Microcontroller_SAM9X35_Datasheet.pdf
+
+ - at91sam9n12
+ + Datasheet
+ http://www.atmel.com/Images/Atmel_11063_32-bit-ARM926EJ-S-Microcontroller_SAM9N12CN11CN12_Datasheet.pdf
+
+ * ARM Cortex-A5 based SoCs
+ - sama5d3 family
+ - sama5d31
+ - sama5d33
+ - sama5d34
+ - sama5d35
+ - sama5d36 (device superset)
+ + Datasheet
+ http://www.atmel.com/Images/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf
+
+ * ARM Cortex-A5 + NEON based SoCs
+ - sama5d4 family
+ - sama5d41
+ - sama5d42
+ - sama5d43
+ - sama5d44 (device superset)
+ + Datasheet
+ http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
+
+
+Linux kernel information
+------------------------
+Linux kernel mach directory: arch/arm/mach-at91
+MAINTAINERS entry is: "ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES"
+
+
+Device Tree for AT91 SoCs and boards
+------------------------------------
+All AT91 SoCs are converted to Device Tree. Since Linux 3.19, these products
+must use this method to boot the Linux kernel.
+
+Work In Progress statement:
+Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards are
+considered as "Unstable". To be completely clear, any at91 binding can change at
+any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from
+the same source tree.
+Please refer to the Documentation/devicetree/bindings/ABI.txt file for a
+definition of a "Stable" binding/ABI.
+This statement will be removed by AT91 MAINTAINERS when appropriated.
+
+Naming conventions and best practice:
+- SoCs Device Tree Source Include files are named after the official name of
+ the product (at91sam9g20.dtsi or sama5d33.dtsi for instance).
+- Device Tree Source Include files (.dtsi) are used to collect common nodes that can be
+ shared across SoCs or boards (sama5d3.dtsi or at91sam9x5cm.dtsi for instance).
+ When collecting nodes for a particular peripheral or topic, the identifier have to
+ be placed at the end of the file name, separated with a "_" (at91sam9x5_can.dtsi
+ or sama5d3_gmac.dtsi for example).
+- board Device Tree Source files (.dts) are prefixed by the string "at91-" so
+ that they can be identified easily. Note that the sama5d3[13456]ek.dts files
+ are an historical exception to this rule.
--
2.1.3
next reply other threads:[~2015-01-09 13:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-09 13:20 Nicolas Ferre [this message]
2015-01-13 2:03 ` [PATCH] ARM: at91/Documentation: add a README for Atmel SoCs Olof Johansson
2015-01-13 11:26 ` Nicolas Ferre
2015-01-13 11:26 ` Nicolas Ferre
2015-01-13 11:36 ` Alexandre Belloni
2015-01-13 13:40 ` Nicolas Ferre
2015-01-15 14:27 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420809631-26923-1-git-send-email-nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).