From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 03/13] ARM: dts: sun9i: Add mmc module clock nodes for A80
Date: Tue, 13 Jan 2015 09:37:25 +0800 [thread overview]
Message-ID: <1421113055-17867-4-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1421113055-17867-1-git-send-email-wens@csie.org>
The mmc module clocks are A80 specific module 0 (storage) type clocks.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andreas F?rber <afaerber@suse.de>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 4b584cb9c2f0..ddc34676987d 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -219,6 +219,42 @@
clock-output-names = "cci400";
};
+ mmc0_clk: clk at 06000410 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000410 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc0", "mmc0_output",
+ "mmc0_sample";
+ };
+
+ mmc1_clk: clk at 06000414 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000414 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc1", "mmc1_output",
+ "mmc1_sample";
+ };
+
+ mmc2_clk: clk at 06000418 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000418 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc2", "mmc2_output",
+ "mmc2_sample";
+ };
+
+ mmc3_clk: clk at 0600041c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x0600041c 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc3", "mmc3_output",
+ "mmc3_sample";
+ };
+
ahb0_gates: clk at 06000580 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
--
2.1.4
next prev parent reply other threads:[~2015-01-13 1:37 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-13 1:37 [PATCH v3 00/13] ARM: sun9i: Enable MMC support on Allwinner A80 Chen-Yu Tsai
2015-01-13 1:37 ` [PATCH v3 01/13] clk: sunxi: Add a common setup function for mmc module clocks Chen-Yu Tsai
2015-01-14 16:26 ` Maxime Ripard
2015-01-13 1:37 ` [PATCH v3 02/13] clk: sunxi: Add mod0 and mmc module clock support for A80 Chen-Yu Tsai
2015-01-14 16:28 ` Maxime Ripard
2015-01-15 2:34 ` Chen-Yu Tsai
2015-01-13 1:37 ` Chen-Yu Tsai [this message]
2015-01-14 16:30 ` [PATCH v3 03/13] ARM: dts: sun9i: Add mmc module clock nodes " Maxime Ripard
2015-01-13 1:37 ` [PATCH v3 04/13] clk: sunxi: Add driver for A80 MMC config clocks/resets Chen-Yu Tsai
2015-01-14 16:37 ` Maxime Ripard
2015-01-15 2:29 ` Chen-Yu Tsai
2015-01-13 1:37 ` [PATCH v3 05/13] ARM: dts: sun9i: Add clock-indices property for bus gate clocks Chen-Yu Tsai
2015-01-14 16:33 ` Maxime Ripard
2015-01-15 2:24 ` Chen-Yu Tsai
2015-01-15 15:20 ` Maxime Ripard
2015-01-15 15:35 ` [linux-sunxi] " Chen-Yu Tsai
2015-01-15 15:51 ` Maxime Ripard
2015-01-15 16:09 ` Chen-Yu Tsai
2015-01-15 21:46 ` Maxime Ripard
2015-01-13 1:37 ` [PATCH v3 06/13] ARM: dts: sun9i: Add mmc config clock nodes Chen-Yu Tsai
2015-01-14 16:38 ` Maxime Ripard
2015-01-13 1:37 ` [PATCH v3 07/13] ARM: dts: sunxi: Use label to reference pio in sunxi-common-regulators Chen-Yu Tsai
2015-01-14 16:39 ` Maxime Ripard
2015-01-13 1:37 ` [PATCH v3 08/13] ARM: dts: sun9i: Add mmc controller nodes to the A80 dtsi Chen-Yu Tsai
2015-01-13 1:37 ` [PATCH v3 09/13] ARM: dts: sun9i: Add pinmux setting for mmc0 Chen-Yu Tsai
2015-01-14 16:40 ` Maxime Ripard
2015-01-13 1:37 ` [PATCH v3 10/13] ARM: dts: sun9i: Convert a80 optimus board dts to label referencing Chen-Yu Tsai
2015-01-13 1:37 ` [PATCH v3 11/13] ARM: dts: sun9i: Enable mmc0 on A80 Optimus Board Chen-Yu Tsai
2015-01-13 1:37 ` [PATCH v3 12/13] ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2 Chen-Yu Tsai
2015-01-13 1:37 ` [PATCH v3 13/13] ARM: dts: sun9i: Enable mmc2 on A80 Optimus Board Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421113055-17867-4-git-send-email-wens@csie.org \
--to=wens@csie.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).