From: sylvain.rochet@finsecur.com (Sylvain Rochet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv6 4/6] USB: host: ohci-at91: Move global variables to private struct
Date: Mon, 19 Jan 2015 12:06:05 +0100 [thread overview]
Message-ID: <1421665567-31759-5-git-send-email-sylvain.rochet@finsecur.com> (raw)
In-Reply-To: <1421665567-31759-1-git-send-email-sylvain.rochet@finsecur.com>
This patch move AT91 OHCI global variables (clocks ptr and clocked
boolean) to private struct ohci_at91_priv, stored in ohci->priv.
Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
---
drivers/usb/host/ohci-at91.c | 84 +++++++++++++++++++++++++++-----------------
1 file changed, 51 insertions(+), 33 deletions(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 65e7836..c810917 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -33,7 +33,16 @@
for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
/* interface, function and usb clocks; sometimes also an AHB clock */
-static struct clk *iclk, *fclk, *uclk, *hclk;
+#define hcd_to_ohci_at91_priv(h) \
+ ((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)
+
+struct ohci_at91_priv {
+ struct clk *iclk;
+ struct clk *fclk;
+ struct clk *uclk;
+ struct clk *hclk;
+ bool clocked;
+};
/* interface and function clocks; sometimes also an AHB clock */
#define DRIVER_DESC "OHCI Atmel driver"
@@ -41,45 +50,49 @@ static struct clk *iclk, *fclk, *uclk, *hclk;
static const char hcd_name[] = "ohci-atmel";
static struct hc_driver __read_mostly ohci_at91_hc_driver;
-static int clocked;
+
+static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
+ .extra_priv_size = sizeof(struct ohci_at91_priv),
+};
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
-static void at91_start_clock(void)
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
{
if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- clk_set_rate(uclk, 48000000);
- clk_prepare_enable(uclk);
+ clk_set_rate(ohci_at91->uclk, 48000000);
+ clk_prepare_enable(ohci_at91->uclk);
}
- clk_prepare_enable(hclk);
- clk_prepare_enable(iclk);
- clk_prepare_enable(fclk);
- clocked = 1;
+ clk_prepare_enable(ohci_at91->hclk);
+ clk_prepare_enable(ohci_at91->iclk);
+ clk_prepare_enable(ohci_at91->fclk);
+ ohci_at91->clocked = true;
}
-static void at91_stop_clock(void)
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
{
- clk_disable_unprepare(fclk);
- clk_disable_unprepare(iclk);
- clk_disable_unprepare(hclk);
+ clk_disable_unprepare(ohci_at91->fclk);
+ clk_disable_unprepare(ohci_at91->iclk);
+ clk_disable_unprepare(ohci_at91->hclk);
if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_disable_unprepare(uclk);
- clocked = 0;
+ clk_disable_unprepare(ohci_at91->uclk);
+ ohci_at91->clocked = false;
}
static void at91_start_hc(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
dev_dbg(&pdev->dev, "start\n");
/*
* Start the USB clocks.
*/
- at91_start_clock();
+ at91_start_clock(ohci_at91);
/*
* The USB host controller must remain in reset.
@@ -91,6 +104,7 @@ static void at91_stop_hc(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_regs __iomem *regs = hcd->regs;
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
dev_dbg(&pdev->dev, "stop\n");
@@ -102,7 +116,7 @@ static void at91_stop_hc(struct platform_device *pdev)
/*
* Stop the USB clocks.
*/
- at91_stop_clock();
+ at91_stop_clock(ohci_at91);
}
@@ -129,6 +143,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
struct ohci_hcd *ohci;
int retval;
struct usb_hcd *hcd = NULL;
+ struct ohci_at91_priv *ohci_at91;
struct device *dev = &pdev->dev;
struct resource *res;
int irq;
@@ -142,6 +157,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
hcd = usb_create_hcd(driver, dev, "at91");
if (!hcd)
return -ENOMEM;
+ ohci_at91 = hcd_to_ohci_at91_priv(hcd);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(dev, res);
@@ -152,29 +168,29 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
- iclk = devm_clk_get(dev, "ohci_clk");
- if (IS_ERR(iclk)) {
+ ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
+ if (IS_ERR(ohci_at91->iclk)) {
dev_err(dev, "failed to get ohci_clk\n");
- retval = PTR_ERR(iclk);
+ retval = PTR_ERR(ohci_at91->iclk);
goto err;
}
- fclk = devm_clk_get(dev, "uhpck");
- if (IS_ERR(fclk)) {
+ ohci_at91->fclk = devm_clk_get(dev, "uhpck");
+ if (IS_ERR(ohci_at91->fclk)) {
dev_err(dev, "failed to get uhpck\n");
- retval = PTR_ERR(fclk);
+ retval = PTR_ERR(ohci_at91->fclk);
goto err;
}
- hclk = devm_clk_get(dev, "hclk");
- if (IS_ERR(hclk)) {
+ ohci_at91->hclk = devm_clk_get(dev, "hclk");
+ if (IS_ERR(ohci_at91->hclk)) {
dev_err(dev, "failed to get hclk\n");
- retval = PTR_ERR(hclk);
+ retval = PTR_ERR(ohci_at91->hclk);
goto err;
}
if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- uclk = devm_clk_get(dev, "usb_clk");
- if (IS_ERR(uclk)) {
+ ohci_at91->uclk = devm_clk_get(dev, "usb_clk");
+ if (IS_ERR(ohci_at91->uclk)) {
dev_err(dev, "failed to get uclk\n");
- retval = PTR_ERR(uclk);
+ retval = PTR_ERR(ohci_at91->uclk);
goto err;
}
}
@@ -597,6 +613,7 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
bool do_wakeup = device_may_wakeup(dev);
int ret;
@@ -623,7 +640,7 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
- at91_stop_clock();
+ at91_stop_clock(ohci_at91);
}
return ret;
@@ -632,12 +649,13 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
static int ohci_hcd_at91_drv_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
if (device_may_wakeup(dev))
disable_irq_wake(hcd->irq);
- if (!clocked)
- at91_start_clock();
+ if (!ohci_at91->clocked)
+ at91_start_clock(ohci_at91);
ohci_resume(hcd, false);
return 0;
@@ -664,7 +682,7 @@ static int __init ohci_at91_init(void)
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
- ohci_init_driver(&ohci_at91_hc_driver, NULL);
+ ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);
/*
* The Atmel HW has some unusual quirks, which require Atmel-specific
--
2.1.4
next prev parent reply other threads:[~2015-01-19 11:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-19 11:06 [PATCHv6 0/6] USB: host: Atmel OHCI and EHCI drivers improvements Sylvain Rochet
2015-01-19 11:06 ` [PATCHv6 1/6] USB: host: ehci-atmel: Add suspend/resume support Sylvain Rochet
2015-01-19 11:06 ` [PATCHv6 2/6] USB: host: ohci-at91: Use struct dev_pm_ops instead of struct platform_driver Sylvain Rochet
2015-01-19 11:06 ` [PATCHv6 3/6] USB: host: ehci-atmel: Move global variables to private struct Sylvain Rochet
2015-01-19 11:06 ` Sylvain Rochet [this message]
2015-01-19 11:06 ` [PATCHv6 5/6] USB: host: ohci-at91: usb_hcd_at91_probe(), remove useless stack initialisation Sylvain Rochet
2015-01-19 11:06 ` [PATCHv6 6/6] USB: host: ohci-at91: Fix wake-up support Sylvain Rochet
2015-01-19 16:55 ` [PATCHv6 0/6] USB: host: Atmel OHCI and EHCI drivers improvements Alan Stern
2015-01-20 10:51 ` Boris Brezillon
2015-01-20 13:01 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421665567-31759-5-git-send-email-sylvain.rochet@finsecur.com \
--to=sylvain.rochet@finsecur.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).