From mboxrd@z Thu Jan 1 00:00:00 1970 From: b38611@freescale.com (Fugang Duan) Date: Tue, 20 Jan 2015 16:48:17 +0800 Subject: [PATCH net-next v2 1/1] ARM: dts: imx6sx: correct i.MX6sx sdb board enet phy address Message-ID: <1421743697-26918-1-git-send-email-b38611@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The commit (3d125f9c91c5) cause i.MX6SX sdb enet cannot work. The cause is the commit add mdio node with un-correct phy address. The patch just correct i.MX6sx sdb board enet phy address. V2: * As Shawn's suggestion that unit-address should match 'reg' property, so update ethernet-phy unit-address. Acked-by: Stefan Agner Signed-off-by: Fugang Duan --- arch/arm/boot/dts/imx6sx-sdb.dts | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 8c1febd..c108bb4 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -166,12 +166,12 @@ #address-cells = <1>; #size-cells = <0>; - ethphy1: ethernet-phy at 0 { - reg = <0>; + ethphy1: ethernet-phy at 1 { + reg = <1>; }; - ethphy2: ethernet-phy at 1 { - reg = <1>; + ethphy2: ethernet-phy at 2 { + reg = <2>; }; }; }; -- 1.7.8